Citation :
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Mar 15 09:21:17 CET 2011
Command line: root=/dev/sda1 ro i915.modeset=1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003beb0000 (usable)
BIOS-e820: 000000003beb0000 - 000000003bebe000 (ACPI data)
BIOS-e820: 000000003bebe000 - 000000003bef0000 (ACPI NVS)
BIOS-e820: 000000003bef0000 - 000000003befe000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7387/MS-7387, BIOS V1.0 08/14/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
last_pfn = 0x3beb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF0000000 write-back
2 base 030000000 mask FF8000000 write-back
3 base 038000000 mask FFC000000 write-back
4 base 03BF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
Scanning 0 areas for low memory corruption
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000003beb0000
0000000000 - 003be00000 page 2M
003be00000 - 003beb0000 page 4k
kernel direct mapping tables up to 3beb0000 @ 1fffd000-20000000
RAMDISK: 37df0000 - 37ff0000
ACPI: RSDP 00000000000fa0c0 00014 (v00 ACPIAM)
ACPI: RSDT 000000003beb0000 00038 (v01 081407 RSDT0941 20070814 MSFT 00000097)
ACPI: FACP 000000003beb0200 00084 (v02 081407 FACP0941 20070814 MSFT 00000097)
ACPI: DSDT 000000003beb04a0 050BD (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
ACPI: FACS 000000003bebe000 00040
ACPI: MCFG 000000003beb0410 0003C (v01 081407 OEMMCFG 20070814 MSFT 00000097)
ACPI: WDRT 000000003beb0450 00047 (v01 081407 VT-8237S 20070814 MSFT 00000097)
ACPI: OEMB 000000003bebe040 00061 (v01 081407 OEMB0941 20070814 MSFT 00000097)
ACPI: HPET 000000003beb5560 00038 (v01 081407 VT-8237S 20070814 MSFT 00000097)
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003a600000-ffff88003b3fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003beb0
On node 0 totalpages: 245311
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 3300 pages used for memmap
DMA32 zone: 238028 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x11068201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 3befe000 (gap: 3befe000:c2d02000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88003bc00000 s81664 r8192 d20736 u2097152
pcpu-alloc: s81664 r8192 d20736 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 241949
Kernel command line: root=/dev/sda1 ro i915.modeset=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 954936k/981696k available (3753k kernel code, 452k absent, 26308k reserved, 2000k data, 516k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 10485760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1599.973 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3201.27 BogoMIPS (lpj=5333243)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Unsupported number of siblings 2
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20101013
ACPI: setting ELCR to 0200 (from 0c98)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Setting APIC routing to flat
SMP disabled
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (3201.27 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x3bf00000-0xdfffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [1106:0364] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:00.1: [1106:1364] type 0 class 0x000600
pci 0000:00:00.2: [1106:2364] type 0 class 0x000600
pci 0000:00:00.3: [1106:3364] type 0 class 0x000600
pci 0000:00:00.4: [1106:4364] type 0 class 0x000600
pci 0000:00:00.5: [1106:5364] type 0 class 0x000800
pci 0000:00:00.6: [1106:6364] type 0 class 0x000600
pci 0000:00:00.7: [1106:7364] type 0 class 0x000600
pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
pci 0000:00:02.0: [1106:a364] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [1106:c364] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:09.0: [1274:1371] type 0 class 0x000401
pci 0000:00:09.0: reg 10: [io 0xec00-0xec3f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:0f.0: [1106:5372] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io 0xe880-0xe887]
pci 0000:00:0f.0: reg 14: [io 0xe800-0xe803]
pci 0000:00:0f.0: reg 18: [io 0xe480-0xe487]
pci 0000:00:0f.0: reg 1c: [io 0xe400-0xe403]
pci 0000:00:0f.0: reg 20: [io 0xe080-0xe08f]
pci 0000:00:0f.0: reg 24: [io 0xd800-0xd8ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0xd480-0xd49f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io 0xe000-0xe01f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xfcfffc00-0xfcfffcff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3372] type 0 class 0x000601
pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
pci 0000:00:12.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:00:12.0: reg 14: [mem 0xfcfff800-0xfcfff8ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: [1106:337b] type 0 class 0x000600
pci 0000:01:00.0: [1106:3371] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000003beb0000 - 000000003bffffff NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-7f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x3bf00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0061]
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: [io 0x00f0-0x00ff]
ERROR: Unable to locate IOAPIC for GSI 13
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x03f0-0x03f5]
pnp 00:04: [io 0x03f7]
ERROR: Unable to locate IOAPIC for GSI 6
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x0010-0x001f]
pnp 00:05: [io 0x0022-0x003f]
pnp 00:05: [io 0x0044-0x005f]
pnp 00:05: [io 0x0062-0x0063]
pnp 00:05: [io 0x0065-0x006f]
pnp 00:05: [io 0x0072-0x007f]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0084-0x0086]
pnp 00:05: [io 0x0088]
pnp 00:05: [io 0x008c-0x008e]
pnp 00:05: [io 0x0090-0x009f]
pnp 00:05: [io 0x00a2-0x00bf]
pnp 00:05: [io 0x00e0-0x00ef]
pnp 00:05: [io 0x03e0-0x03e7]
pnp 00:05: [io 0x04d0-0x04d1]
pnp 00:05: [io 0x0800-0x087f]
pnp 00:05: [io 0x0400-0x041f]
pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:05: [mem 0xfecc0000-0xfecc0fff]
pnp 00:05: [mem 0xfed02000-0xfed02fff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: [irq 0 disabled]
ERROR: Unable to locate IOAPIC for GSI 8
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0a00-0x0a0f]
pnp 00:08: [io 0x0a10-0x0a1f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x000c0000-0x000cffff]
pnp 00:0b: [mem 0x000e0000-0x000fffff]
pnp 00:0b: [mem 0x00100000-0x3befffff]
pnp 00:0b: [mem 0xfec00000-0xffffffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io 0x03e0-0x03e7] has been reserved
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: [io 0x0400-0x041f] has been reserved
system 00:05: [mem 0xfecc0000-0xfecc0fff] has been reserved
system 00:05: [mem 0xfed02000-0xfed02fff] has been reserved
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a10-0x0a1f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0x3befffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:02.0: BAR 14: assigned [mem 0x3c000000-0x3c1fffff]
pci 0000:00:02.0: BAR 15: assigned [mem 0x3c200000-0x3c3fffff 64bit pref]
pci 0000:00:03.0: BAR 14: assigned [mem 0x3c400000-0x3c5fffff]
pci 0000:00:03.0: BAR 15: assigned [mem 0x3c600000-0x3c7fffff 64bit pref]
pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.0: bridge window [mem 0x3c000000-0x3c1fffff]
pci 0000:00:02.0: bridge window [mem 0x3c200000-0x3c3fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0x3c400000-0x3c5fffff]
pci 0000:00:03.0: bridge window [mem 0x3c600000-0x3c7fffff 64bit pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: enabling device (0104 -> 0107)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: enabling device (0104 -> 0107)
pci 0000:00:03.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:03.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x3c000000-0x3c1fffff]
pci_bus 0000:02: resource 2 [mem 0x3c200000-0x3c3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x3c400000-0x3c5fffff]
pci_bus 0000:03: resource 2 [mem 0x3c600000-0x3c7fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2048k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1300837737.183:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1869
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2011-03-22 23:48:58 UTC (1300837738)
Initalizing network drop monitor service
Freeing unused kernel memory: 516k freed
udev[32]: starting version 166
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
[drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.6
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
sata_via 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 3 (level, low) -> IRQ 3
sata_via 0000:00:0f.0: routed to hard irq line 3
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 3
ata2: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 3
pata_via 0000:00:0f.1: version 0.3.4
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
ata3.01: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS10, max UDMA/33
ata3.01: configured for UDMA/33
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi 2:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udev[505]: starting version 166
ACPI: resource vt596_smbus [io 0x0400-0x0407] conflicts with ACPI region SMRG [dma 1024-1039 pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input3
agpgart: Detected VIA P4M900 chipset
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0x1d000, 00:1d:92:0f:62:4e, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:1:0: Attached scsi generic sg1 type 5
Floppy drive(s): fd0 is 1.44M
ACPI: acpi_idle registered with cpuidle
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:1:0: Attached scsi CD-ROM sr0
FDC 0 is a post-1991 82077
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 7, io mem 0xfcfffc00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 3, io base 0x0000d480
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 7, io base 0x0000dc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
uhci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 4, io base 0x0000e000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ENS1371 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 3 (level, low) -> IRQ 3
usb 1-7: new high speed USB device using ehci_hcd and address 4
usb 1-7: selecting invalid altsetting 1
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-7:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-8: new high speed USB device using ehci_hcd and address 5
usb 1-8: selecting invalid altsetting 1
scsi5 : usb-storage 1-8:1.0
usb 3-1: new low speed USB device using uhci_hcd and address 2
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:10.1-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-1: new full speed USB device using uhci_hcd and address 2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input5
generic-usb 0003:046D:C526.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.2-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/input/input6
generic-usb 0003:046D:C526.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.2-1/input1
EXT4-fs (sda1): re-mounted. Opts: (null)
scsi 4:0:0:0: Direct-Access ST332082 0A 3.AA PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 5:0:0:1: Attached scsi generic sg4 type 0
scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 5:0:0:2: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdc] Attached SCSI removable disk
scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 5:0:0:3: Attached scsi generic sg6 type 0
sd 5:0:0:1: [sdd] Attached SCSI removable disk
sd 5:0:0:2: [sde] Attached SCSI removable disk
sd 5:0:0:3: [sdf] Attached SCSI removable disk
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 1999868k swap on /dev/sda2. Priority:-1 extents:1 across:1999868k eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
TCP: Peer 218.94.124.41:46133/4662 unexpectedly shrunk window 574615599:574615641 (repaired)
TCP: Peer 87.89.155.82:57240/4662 unexpectedly shrunk window 58680989:58682597 (repaired)
TCP: Peer 87.89.155.82:57240/4662 unexpectedly shrunk window 58680989:58682597 (repaired)
TCP: Peer 87.89.155.82:57240/4662 unexpectedly shrunk window 58680989:58682597 (repaired)
TCP: Peer 87.89.155.82:57240/4662 unexpectedly shrunk window 58680989:58682597 (repaired)
TCP: Peer 87.89.155.82:57240/4662 unexpectedly shrunk window 58680989:58682597 (repaired)
|