[General]
stressTestProgram = PRIME95
runtimePerCore = auto
coreTestOrder = Default
numberOfThreads = 1
maxIterations = 1
suspendPeriodically = 1
 
# The test modes for Prime95
mode = SSE
 
# The FFT size preset to test for Prime95
# These are basically the presets as present in Prime95, plus an additional few
# Note: If "mode" is set to "CUSTOM", this setting will be ignored
# Smallest         4K to   21K - Prime95 preset text: "tests L1/L2 caches, high power/heat/CPU stress"
# Small           36K to  248K - Prime95 preset text: "tests L1/L2/L3 caches, maximum power/heat/CPU stress"
# Large          426K to 8192K - Prime95 preset text: "stresses memory controller and RAM" (although dedicated memory stress testing is disabled here by default!)
# Huge          8960K to   MAX - Anything beginning at 8960K up to the highest FFT size (32768K for SSE/AVX, 51200K for AVX2, 65536K for AVX512)
# All              4K to   MAX - 4K to up to the highest FFT size (32768K for SSE/AVX, 51200K for AVX2, 65536K for AVX512)
# Moderate      1344K to 4096K - special preset, recommended in the "Curve Optimizer Guide Ryzen 5000"
# Heavy            4K to 1344K - special preset, recommended in the "Curve Optimizer Guide Ryzen 5000"
# HeavyShort       4K to  160K - special preset, recommended in the "Curve Optimizer Guide Ryzen 5000"
#
# You can also define a single FFT size by just entering the value, or your own range by entering two FFT sizes joined by a hyphen, e.g 36-1344
#
# Default: Huge
FFTSize = HeavyShort