#!/bin/sh
 
# Note that compiz window decorations for gnome and various other gubbins need
# certain development RPMS on you system.
#
# The configure often contines and just disables support for the thing you
# actually want and carries on without you knowing.
#
# Amoung others, make sure the following work for you:
#
# pkg-config --exists --print-errors "gtk+-2.0 >= 2.8.0 gconf-2.0 libwnck-1.0 pangocairo gnome-window-settings-2.0 gnome-desktop-2.0"
#  It should not produce any output if all is well.
#
 
SU="su -c"
#SU=sudo
 
MESAARCH=x86
#MESAARCH=x86-64
 
# create /usr/share/aclocal/dirlist file
# add the following line
# /opt/fdo/share/aclocal
$SU "echo /opt/fdo/share/aclocal > /usr/share/aclocal/dirlist"
 
export PKG_CONFIG_PATH="/opt/fdo/lib/pkgconfig:$PKG_CONFIG_PATH"
 
mkdir -p /opt/cvs
 
pushd /opt/cvs
 
# Glitz CVS
cvs -d :pserver:anoncvs@cvs.freedesktop.org:/cvs/cairo co glitz
pushd glitz
./autogen.sh --prefix=/opt/fdo && make && $SU "make install"
popd
 
 
# DRM CVS
cvs -d :pserver:anoncvs@cvs.freedesktop.org:/cvs/dri co drm
pushd drm
./autogen.sh --prefix=/opt/fdo && make && $SU "make install"
popd
 
 
# Xorg
mkdir xorg
pushd xorg
cvs -z3 -d :pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg co util proto lib app/compiz
 
# Macros
pushd util/macros
./autogen.sh --prefix=/opt/fdo && make && $SU "make install"
popd
pushd util/makedepend
./autogen.sh --prefix=/opt/fdo && make && $SU "make install"
popd
 
# Protos:
pushd proto
for i in `ls -1|grep -v CVS`; do pushd $i; ./autogen.sh --prefix=/opt/fdo && make && $SU "make install"; popd ;done
popd
 
# Libs:
pushd lib
for i in xtrans Xdmcp Xau X11 xkbfile fontenc Xfont Xext XRes Xrender Xrandr Xfixes Xdamage Xcomposite ICE SM Xt xkbui Xxf86vm Xxf86misc Xmu Xpm Xaw Xi dmx Xtst; do pushd $i; ./autogen.sh --prefix=/opt/fdo && make && $SU "make install"; popd ;done
popd
 
# Compiz
pushd apps/compiz
./autogen.sh --prefix=/opt/fdo && make && $SU "make install"
popd
 
#popd ---- Pascal
 
cvs -z3 -d:pserver:anonymous@pdx.freedesktop.org:/cvs/mesa co Mesa
pushd Mesa
 
grep -r -l /usr/X11R6/lib * | xargs sed -i 's,/usr/X11R6/lib,/opt/fdo/lib,g'
grep -r -l /usr/X11R6/include * | xargs sed -i 's,/usr/X11R6/include,/opt/fdo/include,g'
grep -r -l /usr/X11R6/bin * | xargs sed -i 's,/usr/X11R6/bin,/opt/fdo/bin,g'
sed -i 's,lib64,lib,g' configs/linux-dri-x86-64
 
make linux-dri-$MESAARCH
popd
 
 
# Xgl:
cvs -d :pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg co -r xgl-0-0-1 -d xgl xserver/xorg
pushd xgl
(cat << EOF
Index: fb/fbcmap.c
===================================================================
RCS file: /cvs/xorg/xserver/xorg/fb/fbcmap.c,v
retrieving revision 1.4
diff -u -r1.4 fbcmap.c
--- fb/fbcmap.c 3 Jul 2005 07:01:18 -0000       1.4
+++ fb/fbcmap.c 15 Feb 2006 19:57:54 -0000
@@ -645,6 +645,14 @@
 }
 
 Bool
+fbSetVisualTypesAndMasks (int depth, int visuals, int bitsPerRGB,
+                          Pixel redMask, Pixel greenMask, Pixel blueMask)
+{
+    return miSetVisualTypesAndMasks(depth, visuals, bitsPerRGB, -1,
+                                    redMask, greenMask, blueMask);
+}
+
+Bool
 fbSetVisualTypes (int depth, int visuals, int bitsPerRGB)
 {
     return miSetVisualTypes(depth, visuals, bitsPerRGB, -1);
EOF
) | patch -p0 && \
./autogen.sh --prefix=/opt/fdo --enable-xgl --enable-xglx --disable-xvfb --disable-xnest --disable-xprint --with-mesa-source=/opt/cvs/Mesa && \
make && \
$SU "make install"
popd
 
pushd /opt/fdo/lib/X11
$SU "ln -s /usr/lib/X11/fonts"
popd
 
popd
 
 
# Assuming you have the nvidia PLF drivers, Xgl will just run(tm) as
# the lib path will be fine:
# /opt/fdo/bin/Xgl -ac -accel glx:pbuffer -accel xv:fbo :0
 
# Once running (PS, try adding it to your /etc/X11/gdm/gdm.conf
# and replace the current command= entry under [server-Standard]
# but add as follows:
# command=/opt/fdo/bin/Xgl -audit 0 -br -accel glx:pbuffer -accel xv:fbo
#
 
# To run compiz you need to set the LD_LIBRARY_PATH to use MESA directly
#   export LD_LIBRARY_PATH=/opt/fdo/lib:/opt/cvs/Mesa/lib
#   /opt/fdo/bin/compiz --replace gconf
#   /opt/fdo/bin/gnome-window-decorator

ouldn't open RGB_DB '/usr/local/xgl//share/X11/rgb'
Could not init font path element /usr/local/xgl//lib/X11/fonts/OTF, removing from list!
Could not init font path element /usr/local/xgl//lib/X11/fonts/CID/, removing from list!
Could not init font path element /usr/local/xgl//lib/X11/fonts/100dpi/, removing from list!

The program 'gnome-window-decorator' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
  (Details: serial 444 error_code 8 request_code 72 minor_code 0)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)

$ glxinfo
name of display: :1.0
display: :1  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier,
    GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
 
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x2c 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  1 0 None
0x2d 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  1 0 None
0x2e 32 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  1 0 Ncon
0x2f 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  1 0 Ncon

$ xdriinfo
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
Screen 0: not direct rendering capable.

$ cat /etc/X11/xorg.conf |grep Load
        Load    "GLcore"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"