(EE) intel(0): No valid modes.
(EE) Screen(s) found, but none have a usable configuration.

(WW) intel(0): libpciaccess failed to read 64kB video BIOS: Unknown error 4294967294
(WW) intel(0): VBIOS initialization failed.

(WW) intel(0): No outputs definitely connected, trying again...
(WW) intel(0): Unable to find initial modes
(EE) intel(0): No valid modes.
(EE) Screen(s) found, but none have a usable configuration.

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2)
Current Operating System: Linux Movee 2.6.26-2-686 #1 SMP Sat Oct 17 17:59:23 UTC 2009 i686
Build Date: 08 June 2009  09:12:57AM
 
 Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 28 03:49:48 2009
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(EE) Failed to load module "type1" (module does not exist, 0)
(WW) module ABI major version (0) doesn't match the server's version (2)
(WW) INTEL: No matching Device section for instance (BusID PCI:0:2:1) found
(EE) INTEL(0): i2c_alm.c: Cannot recover I2C error.
(II) Module "ramdac" already built-in
(EE) INTEL(0): [dri] Intel Info Initialization Failed
(EE) INTEL(0): gart.c: AGP memory allocation failed
(EE) INTEL(0): gart.c: AGP memory bind failed
(EE) INTEL(0): gart.c: AGP memory allocation failed
(EE) INTEL(0): gart.c: AGP memory bind failed
(EE) INTEL(0): gart.c: AGP memory allocation failed
(EE) INTEL(0): gart.c: AGP memory bind failed
(EE) INTEL(0): igd_mode.c: ERROR: No memory for ARGB cursor!
(WW) INTEL(0): Hardware Cursor initialization failed.
(EE) AIGLX error: dlopen of /usr/lib/dri/intel_dri.so failed (/usr/lib/dri/intel_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
expected keysym, got circumflex: line 257 of fr
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list!
[config/hal] couldn't initialise context: (null) ((null))

Kernel Parameters:
  An interface spec can be either short form, which is just the name of
  an interface (eth0 or whatever), or long form.  The long form consists
  of up to seven elements, separated by colons:
 
  ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
  nfsaddrs= is an alias to ip= and can be used too.
 
  <client-ip> IP address of the client. If empty, the address will
                either be determined by RARP/BOOTP/DHCP. What protocol
                is used de- pends on the <autoconf> parameter. If this
                parameter is not empty, autoconf will be used.
 
  <server-ip>   IP address of the NFS server. If RARP is used to
                determine the client address and this parameter is NOT
                empty only replies from the specified server are
                accepted. To use different RARP and NFS server,
                specify your RARP server here (or leave it blank), and
                specify your NFS server in the 'nfsroot' parameter
                (see above). If this entry is blank the address of the
                server is used which answered the RARP/BOOTP/DHCP
                request.
 
  <gw-ip>       IP address of a gateway if the server is on a different
                subnet. If this entry is empty no gateway is used and the
                server is assumed to be on the local network, unless a
                value has been received by BOOTP/DHCP.
 
  <netmask>     Netmask for local network interface. If this is empty,
                the netmask is derived from the client IP address assuming
                classful addressing, unless overridden in BOOTP/DHCP reply.
 
  <hostname>    Name of the client. If empty, the client IP address is
                used in ASCII notation, or the value received by
                BOOTP/DHCP.
 
  <device>      Name of network device to use. If this is empty, all
                devices are used for RARP/BOOTP/DHCP requests, and the
                first one we receive a reply on is configured. If you
                have only one device, you can safely leave this blank.
 
  <autoconf> Method to use for autoconfiguration. If this is either
                'rarp', 'bootp', or 'dhcp' the specified protocol is
                used.  If the value is 'both', 'all' or empty, all
                protocols are used.  'off', 'static' or 'none' means
                no autoconfiguration.
  Examples:
  ip=127.0.0.1:::::lo:none  --> Enable the loopback interface.
  ip=192.168.1.1:::::eth2:none --> Enable static eth2 interface.
  ip=:::::eth0:dhcp --> Enable dhcp protcol for eth0 configuration.
 
  nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
 
  If the 'nfsroot' parameter is NOT given on the command line, the default
  "/tftpboot/%s" will be used.
 
  <server-ip>   Specifies the IP address of the NFS server. If this field
                is not given, the default address as determined by the
                'ip' variable (see below) is used. One use of this
                parameter is for example to allow using different servers
                for RARP and NFS. Usually you can leave this blank.
 
  <root-dir>    Name of the directory on the server to mount as root. If
                there is a "%s" token in the string, the token will be
                replaced by the ASCII-representation of the client's IP
                address.
 
  <nfs-options> Standard NFS options. All options are separated by commas.
                If the options field is not given, the following defaults
                will be used:
                        port            = as given by server portmap daemon
                        rsize           = 1024
                        wsize           = 1024
                        timeo           = 7
                        retrans         = 3
                        acregmin        = 3
                        acregmax        = 60
                        acdirmin        = 30
                        acdirmax        = 60
                        flags           = hard, nointr, noposix, cto, ac
   
  root=/dev/nfs
   
  If you don't use nfsroot= parameter you need to set root=/dev/nfs  
  to boot from a nfs root by autoconfiguration.

ip=dhcp nfsroot=192.168.0.110:/laracinequejeveux/

Version 1.03e       ------Sequential Output------ --Sequential Input- --Random-
                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
alpaga         300M  5086  49  6169   5  4683   5  9311  98 13734   6 446.0   9
                    ------Sequential Create------ --------Random Create--------
                    -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
                 16   797   7  3269  16   530   4   743   7  3779  15   596   4
alpaga,300M,5086,49,6169,5,4683,5,9311,98,13734,6,446.0,9,16,797,7,3269,16,530,4,743,7,3779,15,596,4

Version 1.03e       ------Sequential Output------ --Sequential Input- --Random-
                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
alpaga         300M  5204  55  5404   5  3544   7  7906  95 11175   7 593.8  14
                    ------Sequential Create------ --------Random Create--------
                    -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
                 16   760   7  3239  15   621   4   727   6  3833  16   624   4
alpaga,300M,5204,55,5404,5,3544,7,7906,95,11175,7,593.8,14,16,760,7,3239,15,621,4,727,6,3833,16,624,4