Citation :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-kirkwood (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Tue Jun 14 23:05:32 UTC 2011
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Marvell SheevaPlug Reference Board
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03d50e0, node_mem_map c043f000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 121044KB available (3516K code, 583K data, 124K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] Console: colour dummy device 80x30
[ 0.000123] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[ 0.240079] Security Framework initialized
[ 0.240097] SELinux: Disabled at boot.
[ 0.240118] Mount-cache hash table entries: 512
[ 0.240369] Initializing cgroup subsys ns
[ 0.240381] Initializing cgroup subsys cpuacct
[ 0.240390] Initializing cgroup subsys devices
[ 0.240398] Initializing cgroup subsys freezer
[ 0.240406] Initializing cgroup subsys net_cls
[ 0.240447] CPU: Testing write buffer coherency: ok
[ 0.241005] devtmpfs: initialized
[ 0.242413] regulator: core version 0.5
[ 0.242586] NET: Registered protocol family 16
[ 0.242970] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 0.242982] Feroceon L2: Cache support initialised.
[ 0.243380] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000
[ 0.243402] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000
[ 0.244829] bio: create slab <bio-0> at 0
[ 0.245112] vgaarb: loaded
[ 0.245582] Switching to clocksource orion_clocksource
[ 0.249460] NET: Registered protocol family 2
[ 0.249702] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.250539] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.250639] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.250692] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.250702] TCP reno registered
[ 0.250851] NET: Registered protocol family 1
[ 0.251026] Unpacking initramfs...
[ 0.561839] Freeing initrd memory: 4416K
[ 0.561948] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.562202] audit: initializing netlink socket (disabled)
[ 0.562237] type=2000 audit(0.550:1): initialized
[ 0.568729] VFS: Disk quotas dquot_6.5.2
[ 0.568996] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.569105] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.569752] msgmni has been set to 245
[ 0.571496] alg: No test for stdrng (krng)
[ 0.571619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.571631] io scheduler noop registered
[ 0.571638] io scheduler anticipatory registered
[ 0.571646] io scheduler deadline registered
[ 0.571824] io scheduler cfq registered (default)
[ 0.577888] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.578364] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 0.901599] console [ttyS0] enabled
[ 0.905703] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
[ 0.914273] Scanning device for bad blocks
[ 0.924326] Bad eraseblock 159 at 0x0000013e0000
[ 0.998959] 4 cmdlinepart partitions found on MTD device orion_nand
[ 1.005252] Creating 4 MTD partitions on "orion_nand":
[ 1.010439] 0x000000000000-0x000000100000 : "u-boot"
[ 1.016017] 0x000000100000-0x000000500000 : "uImage"
[ 1.021463] 0x000000500000-0x000002500000 : "rootfs"
[ 1.026960] 0x000002500000-0x000010000000 : "data"
[ 1.032944] mice: PS/2 mouse device common for all mice
[ 2.045624] rtc-mv rtc-mv: internal RTC not ticking
[ 2.050618] i2c /dev entries driver
[ 2.054289] cpuidle: using governor ladder
[ 2.058537] cpuidle: using governor menu
[ 2.062570] Registered led device: plug:green:health
[ 2.067634] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 2.074034] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 2.115650] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 2.155649] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 2.195649] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 2.235649] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 2.242328] TCP cubic registered
[ 2.245569] NET: Registered protocol family 17
[ 2.250068] Gating clock of unused units
[ 2.250076] before: 0x00dfc3fd
[ 2.250083] after: 0x00c701d9
[ 2.250396] registered taskstats version 1
[ 2.255172] /build/buildd-linux-2.6_2.6.32-35-armel-66FbPF/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.269778] Initalizing network drop monitor service
[ 2.274822] Freeing init memory: 124K
[ 2.326075] udev[44]: starting version 164
[ 2.613173] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 2.619191] mv643xx_eth smi: probed
[ 2.668864] net eth0: port 0 with MAC address 00:10:75:XX:XX:XX //Véritable adresse de la carte réseau interne !
[ 2.683335] usbcore: registered new interface driver usbfs
[ 2.689898] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[ 2.702335] usbcore: registered new interface driver hub
[ 2.710335] usbcore: registered new device driver usb
[ 2.730019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.737694] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 2.745021] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 2.775651] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 2.795614] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.801619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.808451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.815718] usb usb1: Product: Marvell Orion EHCI
[ 2.820450] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 2.826845] usb usb1: SerialNumber: orion-ehci.0
[ 2.832379] usb usb1: configuration #1 chosen from 1 choice
[ 2.838323] hub 1-0:1.0: USB hub found
[ 2.842122] hub 1-0:1.0: 1 port detected
[ 3.165628] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 3.317048] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.323779] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.330960] usb 1-1: Product: USB2.0 Hub
[ 3.336303] usb 1-1: configuration #1 chosen from 1 choice
[ 3.345186] hub 1-1:1.0: USB hub found
[ 3.349304] hub 1-1:1.0: 4 ports detected
[ 3.625959] usb 1-1.3: new high speed USB device using orion-ehci and address 3
[ 3.736543] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5567
[ 3.743456] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.750816] usb 1-1.3: Product: Cruzer Blade
[ 3.755104] usb 1-1.3: Manufacturer: SanDisk
[ 3.759433] usb 1-1.3: SerialNumber: 2004452880139B61B468
[ 3.766233] usb 1-1.3: configuration #1 chosen from 1 choice
[ 3.859159] SCSI subsystem initialized
[ 3.886445] Initializing USB Mass Storage driver...
[ 3.891644] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3.898352] usbcore: registered new interface driver usb-storage
[ 3.904977] usb-storage: device found at 3
[ 3.904986] usb-storage: waiting for device to settle before scanning
[ 3.905021] USB Mass Storage support registered.
[ 3.916057] usb 1-1.4: new high speed USB device using orion-ehci and address 4 //Détection de mon chipset ralink !!!
[ 4.185565] usb 1-1.4: New USB device found, idVendor=148f, idProduct=2573
[ 4.192488] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.199862] usb 1-1.4: Product: 54M.USB.......
[ 4.204323] usb 1-1.4: Manufacturer: Ralink
[ 4.208536] usb 1-1.4: SerialNumber: 12345
[ 4.213937] usb 1-1.4: configuration #1 chosen from 1 choice
[ 8.895956] usb-storage: device scan complete
[ 8.896767] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
[ 8.934206] sd 0:0:0:0: [sda] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 8.943189] sd 0:0:0:0: [sda] Write Protect is off
[ 8.948026] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 8.948036] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.956811] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.962934] sda: sda1 sda2
[ 8.971188] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.977341] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.586606] udev[170]: starting version 164
[ 14.087938] cfg80211: Using static regulatory domain info
[ 14.093390] cfg80211: Regulatory domain: US
[ 14.097627] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.104885] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 14.111740] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.118567] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.125384] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.132214] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.139045] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 14.157423] cfg80211: Calling CRDA for country: US
[ 14.526171] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 14.533524] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 14.541012] usbcore: registered new interface driver rt2500usb
[ 14.870920] phy1: Selected rate control algorithm 'minstrel'
[ 14.872029] Registered led device: rt73usb-phy1::radio
[ 14.877857] Registered led device: rt73usb-phy1::assoc
[ 14.883224] Registered led device: rt73usb-phy1::quality
[ 14.889113] usbcore: registered new interface driver rt73usb
[ 15.131749] Adding 1047544k swap on /dev/sda2. Priority:-1 extents:1 across:1047544k [ 16.170259] rt73usb 1-1.4:1.0: firmware: requesting rt73.bin
[ 19.257193] wlan0: direct probe to AP 00:26:f2:XX:XX:XX (try 1) //Adresse mac du routeur netgear wifi
[ 19.455633] wlan0: direct probe to AP 00:26:f2:XX:XX:XX (try 2)
[ 19.457829] wlan0: direct probe responded
[ 19.457840] wlan0: authenticate with AP 00:26:f2:XX:XX:XX (try 1)
[ 19.461063] wlan0: authenticated
[ 19.461116] wlan0: associate with AP 00:26:f2:XX:XX:XX (try 1)
[ 19.465573] wlan0: RX AssocResp from 00:26:f2:XX:XX:XX (capab=0x31 status=0 aid=4)
[ 19.465585] wlan0: associated
[ 23.380333] NET: Registered protocol family 10
[ 23.388161] ADDRCONF(NETDEV_UP): eth0: link is not ready
|