Bonjour...
Quelqu'un aurait il un graveur LG 4160b qui fonctionne sous linux ?!!
je viens de changer de graveur de DVD depuis peut... et avec le LG il veux pas graver... error... !
###########################################################
[root@nobody log]# dvdrecord -v -dao speed=1 dev=1,0,0 -data /usr/image.iso
dvdrtools v0.1.6
Portions (c) 2002-2003 Ark Linux <bero@arklinux.org>
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.31
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4160B'
Revision : 'A301'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4199 MB
Total size: 4822 MB (477:45.17) = 2149888 sectors
Lout start: 4822 MB (477:47/13) = 2149888 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 148608
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 2150054
Track 01: 0 of 4199 MB written.dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 20 CE A6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0C 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0C 00 00 00 00 00 00
Writing time: 9.282s
Fixating...
Fixating time: 0.005s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
##########################################
comme vous l'aurez remarquer j'utilise dvdrecord, en emulation scsi !
avec mon anciens graveur tout était nickel !
j'ai changer pour un LG, brancher au meme endroit.. j'ai reinstaller dvdrtools... rien a faire...
ya t'il une manipulation particulière quand on change de lecteur ?! j'ai cru voir sur des forums english que les LG bugguait un peu avec LinuX ?
