tanar:/mnt/data/distrib/freebsd# cdrecord -dao -v dev=0,1,0 5.1-RELEASE-i386-miniinst.iso
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8100 '
Revision : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO
Drive buf size : 1040128 = 1015 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 237 MB
Total size: 273 MB (27:03.25) = 121744 sectors
Lout start: 273 MB (27:05/19) = 121744 sectors
Current Secsize: 2048
Trying to clear drive status.
cdrecord.mmap: Drive needs to reload the media to return to proper status.
ATIP start of lead out: 336075 (74:43/00)
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 214331
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
cdrecord.mmap: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 73 02 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x02 (power calibration area is full) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.431s timeout 200s
cdrecord.mmap: OPC failed.
Writing time: 1.482s
cdrecord.mmap: fifo had 64 puts and 0 gets.
cdrecord.mmap: fifo was 0 times empty and 0 times full, min fill was 100%.
|