Nouvelle version du miner ETH de Claymore, avec modification des timings mémoire à la volée.
https://bitcointalk.org/index.php?topic=1433925.0
-strap applies specified memory timings (strap). This option is available for Windows only and requires AMD drivers 18.x or newer (most tests were performed on 19.4.3).
Currently only AMD Polaris cards are supported, support for other cards will be added later.
Miner has built-in straps database, all straps are separated by memory (4GB or 8GB) and memory type (Samsung, Elpida, Hynix, Micron).
Straps are sorted by intensity, i.e. "-strap 1" supports higher memory clock than "-strap 2", etc. For the best hashrate you must also set high memory clock, so "-strap 1" is a good start point for tests.
You can specify just strap index, for example "-strap 1" will apply first strap from database for all Polaris GPUs based on GPU memory size and memory type, miner will show full strap name detected.
Or you can specify strap directly in format "POL8S1": "POL" means Polaris, "8" means 8GB, "S" means Samsung memory, "1" means index.
Zero index means default strap from VBIOS, i.e. no strap is applied.
You can also use "@" character after strap to specify memory clock, it works like "-mclock" but overrides it, for example, "-strap POL4E2@1900".
You can also specify values for every card, for example "-strap 1@2100,POL4H3,0".
If strap is applied, miner will return old strap and memory clock when miner is closed.
The best approach to find best strap is to set "-strap 1,0" (it sets strap #1 for first card and no straps for the rest of GPUs) and then raise memory clock to see what clocks and hashrate you can reach.
Then so the same for strap #2 etc.
You can also specify raw strap string (96 characters). Note that single option value means that this strap is applied for all GPUs, use "0" to apply strap on single GPU,
for example "-strap 0,1@2200,0" applies strap #1 and memory clock 2200MHz for second GPU only.
NOTE: if specified strap fails, Windows is crashed. After reboot default timings are restored and you can try some different settings.
Message édité par WhyMe le 08-05-2019 à 15:44:49
---------------
FeedBack HFR