igguk_fr | bernardo a écrit :
Bonjour à tous,
J'ai un souci avec une prise Legrand Zigbee fraichement achetée (et fabriquée en 01/24 d'après l'étiquette). Référence 067725A
Quand je l'appaire avec Z2M, elle est rapidement reconnue, puis "éjectée" en boucle Est ce que ce type de problème vous dit quelque chose ?
https://rehost.diberie.com/Picture/Get/t/265086
|
Bonjour à tous.
j’ai exactement le même problème d’association mais avec une autre prise, une Schneider Electric modèle Wiser Odace S520559 https://www.se.com/fr/fr/product/S5 [...] bee-blanc/.
J’en ai acheté trois en janvier 2024, je les ai associés sans problème et deux sont encore sur mon instance principale sous zigbee2mqtt avec une clef SONOFF CC2652P.
Ce début de semaine, j’ai souhaité tester la clef SkyConnect (EFR32MG21) et je me suis créé une nouvelle instance d’HA sur laquelle j’ai configuré cette clef.
J’ai connecté avec succès plusieurs prises Nous AZ1 et des capteurs SONOFF, mais impossible d’associer cette prise. J’ai essayé la procédure de reset également sans succès.
J’ai cru à une incompatibilité avec le chip de cette nouvelle clef SkyConnect, mais le problème est exactement identique si j’essaie de réassocier sur mon instance principale. Ces prises étaient parfaitement reconnues par zigbee2mqtt 1.35.1 et s’étaient associés très facilement (enfin, une fois que l’on a compris le triple clic …).
https://www.zigbee2mqtt.io/devices/ [...] c-eko09716
Je pense que le souci pourrait venir de la version de zigbee2mqtt (maintenant en 1.36), je vais continuer à creuser cette piste.
Voici le log, on remarque l’association, la transmission de données puis le warning avec le message ‘left the network’
Code :
- info 2024-03-27 19:55:33: Starting interview of '0x70ac08fffe3da15b'
- info 2024-03-27 19:55:33: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b","status":"started"},"type":"device_interview"}'
- info 2024-03-27 19:55:44: Successfully interviewed '0x70ac08fffe3da15b', device has successfully been paired
- info 2024-03-27 19:55:44: Device '0x70ac08fffe3da15b' is supported, identified as: Schneider Electric Zigbee smart socket with power meter (EKO09716)
- info 2024-03-27 19:55:44: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"definition":{"description":"Zigbee smart socket with power meter","exposes":[{"features":[{"access":7,"description":"On/off state of the switch","label":"State","name":"state","property":"state","type":"binary","value_off":"OFF","value_on":"ON","value_toggle":"TOGGLE"}],"type":"switch"},{"access":1,"category":"diagnostic","description":"Instantaneous measured power","label":"Power","name":"power","property":"power","type":"numeric","unit":"W"},{"access":1,"description":"Sum of consumed energy","label":"Energy","name":"energy","property":"energy","type":"numeric","unit":"kWh"},{"access":7,"description":"Controls the behaviour when the device is powered on","label":"Power on behavior","name":"power_on_behavior","property":"power_on_behavior","type":"enum","values":["off","previous","on"]},{"access":1,"category":"diagnostic","description":"Instantaneous measured electrical current","label":"Current","name":"current","property":"current","type":"numeric","unit":"A"},{"access":1,"category":"diagnostic","description":"Measured electrical potential value","label":"Voltage","name":"voltage","property":"voltage","type":"numeric","unit":"V"},{"access":1,"category":"diagnostic","description":"Link quality (signal strength)","label":"Linkquality","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"EKO09716","options":[{"access":2,"description":"Calibrates the power value (percentual offset), takes into effect on next report of device.","label":"Power calibration","name":"power_calibration","property":"power_calibration","type":"numeric"},{"access":2,"description":"Number of digits after decimal point for power, takes into effect on next report of device. This option can only decrease the precision, not increase it.","label":"Power precision","name":"power_precision","property":"power_precision","type":"numeric","value_max":3,"value_min":0},{"access":2,"description":"Calibrates the energy value (percentual offset), takes into effect on next report of device.","label":"Energy calibration","name":"energy_calibration","property":"energy_calibration","type":"numeric"},{"access":2,"description":"Number of digits after decimal point for energy, takes into effect on next report of device. This option can only decrease the precision, not increase it.","label":"Energy precision","name":"energy_precision","property":"energy_precision","type":"numeric","value_max":3,"value_min":0},{"access":2,"description":"Calibrates the current value (percentual offset), takes into effect on next report of device.","label":"Current calibration","name":"current_calibration","property":"current_calibration","type":"numeric"},{"access":2,"description":"Number of digits after decimal point for current, takes into effect on next report of device. This option can only decrease the precision, not increase it.","label":"Current precision","name":"current_precision","property":"current_precision","type":"numeric","value_max":3,"value_min":0},{"access":2,"description":"Calibrates the voltage value (percentual offset), takes into effect on next report of device.","label":"Voltage calibration","name":"voltage_calibration","property":"voltage_calibration","type":"numeric"},{"access":2,"description":"Number of digits after decimal point for voltage, takes into effect on next report of device. This option can only decrease the precision, not increase it.","label":"Voltage precision","name":"voltage_precision","property":"voltage_precision","type":"numeric","value_max":3,"value_min":0},{"access":2,"description":"State actions will also be published as 'action' when true (default false).","label":"State action","name":"state_action","property":"state_action","type":"binary","value_off":false,"value_on":true}],"supports_ota":false,"vendor":"Schneider Electric"},"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b","status":"successful","supported":true},"type":"device_interview"}'
- info 2024-03-27 19:55:44: Configuring '0x70ac08fffe3da15b'
- info 2024-03-27 19:55:44: Successfully configured '0x70ac08fffe3da15b'
- info 2024-03-27 19:55:47: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":192,"power":null,"power_on_behavior":null,"state":"OFF","voltage":232}'
- info 2024-03-27 19:55:47: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":255,"power":null,"power_on_behavior":null,"state":"ON","voltage":232}'
- info 2024-03-27 19:55:47: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":252,"power":null,"power_on_behavior":null,"state":"ON","voltage":232}'
- info 2024-03-27 19:55:47: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":252,"power":null,"power_on_behavior":null,"state":"OFF","voltage":232}'
- info 2024-03-27 19:55:48: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":255,"power":null,"power_on_behavior":null,"state":"ON","voltage":232}'
- info 2024-03-27 19:55:49: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":255,"power":null,"power_on_behavior":null,"state":"ON","voltage":232}'
- info 2024-03-27 19:55:49: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":252,"power":null,"power_on_behavior":null,"state":"OFF","voltage":232}'
- info 2024-03-27 19:55:49: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":252,"power":null,"power_on_behavior":null,"state":"ON","voltage":232}'
- info 2024-03-27 19:55:49: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":248,"power":null,"power_on_behavior":null,"state":"OFF","voltage":232}'
- info 2024-03-27 19:55:50: MQTT publish: topic 'zigbee2mqtt/0x70ac08fffe3da15b', payload '{"current":null,"energy":null,"linkquality":248,"power":null,"power_on_behavior":null,"state":"ON","voltage":232}'
- warn 2024-03-27 19:55:51: Device '0x70ac08fffe3da15b' left the network
- info 2024-03-27 19:55:51: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b"},"type":"device_leave"}'
- warn 2024-03-27 19:55:51: Device '0x70ac08fffe3da15b' left the network
- info 2024-03-27 19:55:51: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b"},"type":"device_leave"}'
- warn 2024-03-27 19:55:51: Device '0x70ac08fffe3da15b' left the network
- info 2024-03-27 19:55:51: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b"},"type":"device_leave"}'
- warn 2024-03-27 19:55:51: Device '0x70ac08fffe3da15b' left the network
- info 2024-03-27 19:55:51: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b"},"type":"device_leave"}'
- warn 2024-03-27 19:55:52: Device '0x70ac08fffe3da15b' left the network
- info 2024-03-27 19:55:52: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x70ac08fffe3da15b","ieee_address":"0x70ac08fffe3da15b"},"type":"device_leave"}'
- warn 2024-03-27 19:55:52: Device '0x70ac08fffe3da15b' left the network
|
|