Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2481 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  Logiciels

  [debian sid] Problème rage128pro et xfree 4.3

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

[debian sid] Problème rage128pro et xfree 4.3

n°620990
XK
Posté le 16-01-2005 à 15:15:31  profilanswer
 

Je n'arrive pas à faire fonctionner correctement xfree avec une rage128pro et un écran LCD L1920P (19" 1280*1024).
 
Voici mon XF86Config-4

Citation :

Section "Files"
 FontPath "unix/:7100"   # local font server
 # if the local font server has problems, we can fall back on these
 FontPath "/usr/lib/X11/fonts/misc"
 FontPath "/usr/lib/X11/fonts/cyrillic"
 FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/Type1"
 FontPath "/usr/lib/X11/fonts/CID"
 FontPath "/usr/lib/X11/fonts/Speedo"
 FontPath "/usr/lib/X11/fonts/100dpi"
 FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
 
Section "Module"
 Load "GLcore"
 Load "bitmap"
 Load "dbe"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "record"
 Load "speedo"
 Load "type1"
 Load "vbe"
EndSection
 
Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver  "keyboard"
 Option  "CoreKeyboard"
 Option  "XkbRules" "xfree86"
 Option  "XkbModel" "pc104"
 Option  "XkbLayout" "fr"
EndSection
 
Section "InputDevice"
 Identifier "Configured Mouse"
 Driver  "mouse"
 Option  "CorePointer"
 Option  "Device"  "/dev/input/mice"
 Option  "Protocol"  "ImPS/2"
 Option  "Emulate3Buttons" "true"
 Option  "ZAxisMapping"  "4 5"
EndSection
 
Section "Device"
 Identifier "ATI Rage128 Pro"
 Driver  "ati"
EndSection
 
Section "Monitor"
 Identifier "LG Flatron L1920P"
 HorizSync 30-83
 VertRefresh 56-75
 Option  "DPMS"
EndSection
 
Section "Screen"
 Identifier "Default Screen"
 Device  "ATI Rage128 Pro"
 Monitor  "LG Flatron L1920P"
 DefaultDepth 24
 SubSection "Display"
  Depth  16
  Modes  "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  24
  Modes  "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection
 
Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
EndSection
 
Section "DRI"
 Mode 0666
EndSection


 
Xfce4 se lance en 1280*1024 mais je trouve le log de Xfree étrange, normal ou pas ? :

Citation :

(EE) R128(0): No DFP detected
(II) R128(0): LG Flatron L1920P: Using hsync range of 30.00-83.00 kHz
(II) R128(0): LG Flatron L1920P: Using vrefresh range of 56.00-75.00 Hz
(II) R128(0): Clock range:  12.50 to 400.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (vrefresh out of range)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (vrefresh out of range)
(II) R128(0): Not using default mode "720x400" (vrefresh out of range)
(II) R128(0): Not using default mode "360x200" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(WW) (1600x1200,LG Flatron L1920P) mode clock 162MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,LG Flatron L1920P) mode clock 175.5MHz exceeds DDC maximum 140MHz
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(WW) (1792x1344,LG Flatron L1920P) mode clock 204.8MHz exceeds DDC maximum 140MHz
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1152x768" (vrefresh out of range)
(II) R128(0): Not using default mode "576x384" (vrefresh out of range)
(WW) (1400x1050,LG Flatron L1920P) mode clock 155.8MHz exceeds DDC maximum 140MHz
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) R128(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) R128(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) R128(0): Virtual size is 1280x1024 (pitch 1280)


 
De plus l'AGP ne fonctionne pas alors que le module a bien été compillé et agpgart est bien chargé lorsque je lance X, dans le log j'ai :

Citation :

(WW) R128(0): [agp] AGP not available
(WW) R128(0): [agp] AGP failed to initialize -- falling back to PCI mode.
(WW) R128(0): [agp] Make sure you have the agpgart kernel module loaded.


 
Je ne comprends pas tout ces problèmes, si vous pourriez m'éclairer ça m'aiderai bp :hello:


Message édité par XK le 16-01-2005 à 15:29:52
mood
Publicité
Posté le 16-01-2005 à 15:15:31  profilanswer
 

n°621236
bunyman
Posté le 16-01-2005 à 19:30:18  profilanswer
 

On dirait que Xfree essai de frequence et résolution qui ne sont pas dans ton XF86config-4, es-tu sur que c'est bien le bon fichier, et que tu n'a pas un autre fichier de conf qui traine ?  Essai de reconfiguré ton serveur X avec

Citation :

dpkg-reconfigure xserver-xfree86


Sinon essai d'installer X.org. Des paquet on été fait par buntu.
 
Pour otn problèem d'agp que te donne un lsmod ? Ta compilé agpgart en dur ou en module ? quel est ton chipset ?
 

n°622027
XK
Posté le 17-01-2005 à 21:14:29  profilanswer
 

je ne sais pas pour quelle raison il teste toutes ces fréquences, elles ne sont pas spécifiées dans le fichier de config.
 
j'ai déjà fais "dpkg-reconfigure xserver-xfree86" plusieurs fois mais rien d'anormal...
 
j'avais compilé agpgart en dur dans le noyau avec le module du 440BX (chipset de la carte mère) mais ça ne fonctionnait pas. J'ai envuite compilé en module agpgart.  
 

Citation :

<M> /dev/agpgart (AGP Support)                                        
  < >   ALI chipset support                                
  < >   ATI chipset support                        
  < >   AMD Irongate, 761, and 762 chipset support      
  < >   AMD Opteron/Athlon64 on-CPU GART support          
  <M>   Intel 440LX/BX/GX, I8xx and E7x05 chipset support      
  < >   Intel i865 chipset support                
  < >   NVIDIA nForce/nForce2 chipset support    
  < >   SiS chipset support          
  < >   Serverworks LE/HE chipset support  

                             
 
Je l'ai chargé avec modprobe, il apparait dans lsmod  

Citation :

# lsmod
Module                  Size  Used by
agpgart                34472  0
r128                  109092  0
...


mais
 

Citation :

(WW) R128(0): [agp] AGP not available
(WW) R128(0): [agp] AGP failed to initialize -- falling back to PCI mode.
(WW) R128(0): [agp] Make sure you have the agpgart kernel module loaded.  


est tjr dans le log :heink:
 
de plus xfce ne se lance que en root et pas en utilisateur simple, pourquoi? :??:

n°622419
XK
Posté le 18-01-2005 à 15:39:52  profilanswer
 

up

n°622499
goldyfruit
Je me lève et je confirme !
Posté le 18-01-2005 à 18:18:46  profilanswer
 


 
 

Code :
  1. <*> /dev/agpgart (AGP Support)                                     
  2.   < >   ALI chipset support                               
  3.   < >   ATI chipset support                     
  4.   < >   AMD Irongate, 761, and 762 chipset support     
  5.   < >   AMD Opteron/Athlon64 on-CPU GART support       
  6.   <*>   Intel 440LX/BX/GX, I8xx and E7x05 chipset support   
  7.   < >   Intel i865 chipset support               
  8.   < >   NVIDIA nForce/nForce2 chipset support   
  9.   < >   SiS chipset support         
  10.   < >   Serverworks LE/HE chipset support


Tu as essayé comme ca ?
 
Et pour xfce tu as ajouté ton user au groupe video ?


Message édité par goldyfruit le 18-01-2005 à 18:19:34

---------------
http://wiki.incloudus.com/display/DOC | http://blog.incloudus.com | http://wiki.goldzoneweb.info | http://www.stendhalclub.fr
n°622514
XK
Posté le 18-01-2005 à 18:58:05  profilanswer
 

effectivement ça fonctionne comme ça, j'avais la flème de tester mais finalement il n'y a que ça qui marche! merci :jap:

n°622518
goldyfruit
Je me lève et je confirme !
Posté le 18-01-2005 à 19:03:29  profilanswer
 

XK a écrit :

effectivement ça fonctionne comme ça, j'avais la flème de tester mais finalement il n'y a que ça qui marche! merci :jap:


 :jap:


---------------
http://wiki.incloudus.com/display/DOC | http://blog.incloudus.com | http://wiki.goldzoneweb.info | http://www.stendhalclub.fr
n°622567
XK
Posté le 18-01-2005 à 20:51:47  profilanswer
 

par contre la souris est très très lente et saccadée... tu as une idée?

n°622616
goldyfruit
Je me lève et je confirme !
Posté le 18-01-2005 à 22:02:47  profilanswer
 

XK a écrit :

par contre la souris est très très lente et saccadée... tu as une idée?


Hum regarde dans ton XF86Config au niveau de la section souris tu as une valeur avec "false" remplace la par "true" je vois que ca :/


---------------
http://wiki.incloudus.com/display/DOC | http://blog.incloudus.com | http://wiki.goldzoneweb.info | http://www.stendhalclub.fr

Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  Logiciels

  [debian sid] Problème rage128pro et xfree 4.3

 

Sujets relatifs
Problème de droit sur une partition montéeprobleme de download de pdf en pieche jointe - webmail sous linux
Probleme reseau Gigabit[Debian] Kernel-headers du noyau 2.4.28
[Resolu]Problème INEDIT, drivers pour carte nVidia "No screens found"[qmail]probleme
Probléme de configuration Postfix + ldap + maildropproblmem d'installation débian LVM+GRUB
[Résolu] Etrange Problème avec xfce 4.2 RC3[Help] A l'attention de Monsieur Leneuf - Debian et armes à feu
Plus de sujets relatifs à : [debian sid] Problème rage128pro et xfree 4.3


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR