Citation :
Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980
Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.
3x Orange 1x green
Problem : any problem with printer mechanics
Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.
4x orange 1x green
Problem printer absorber full
Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset
5x orange 1x green
Problem: Black or Color cartridge trouble.
Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.
7x orange 1x green
Problem: Black or Color cartridge trouble.
Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.
8x orange 1x green
Problem printer absorber full (Waste Ink Pad Full)
Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset
Manual Resetting Procedures:
Waste ink absorber error message can sometimes be solved by resetting the printer itself. The resetting method is this: (it might also work on other models)
1. Unplug the power cord and the data cable(printer to pc)
2. while press-holding the (printer) power button plug the power cable (do not release printer power button until step 3)
3. press 'resumet' ( the button below the power button of the printer) button twice...
4. release the power button
5. connect the usb cable of the printer to the pc... A new canon printer shall be found in the list of printers. use it as default printer
|