Salut,
Essaies avec ce qui suit. Procédure effectuée avec succés dans mon cas mais c'est pas trivial. C'est pas non plus aussi compliqué que ça en à l'air.
Bon courage.
In case you bought a DVD whose language tracks and subtitles don't match the languages you're fluent with, here is a (long) tutorial for adding subtitles to a DVD.
*** Beware, this is definitively not for newbies ***
Tools needed:
- DVD Shrink 3b5
- VobEdit 0.6
- IfoEdit 0.96
- Str2Sup a4.03
- BurnAtOnce or Nero...
Material needed:
- Original DVD
- SRT subtitles file for that DVD (check in the DiVX sites)
- about 13GB of disk space
- a few hours...
--------- Step 1 - Ripping ------------
Use DVD Shrink 3b5 Re-author feature to grab the movie title (no menus, no extras...)
video: no compression
audio: main track only
subtitles: none
Save in: C:\Rip
So you should now have
c:\Rip\VIDEO_TS.BUP
c:\Rip\VIDEO_TS.IFO
c:\Rip\VTS_01_0.BUP
c:\Rip\VTS_01_0.IFO
c:\Rip\VTS_01_1.VOB
and a few more VTS_01_x.VOB depending on the size of your movie
--------- Step 2 - Demux ---------------
Use VobEdit 0.6 to demux the Vob files into separate video and audio files.
Create D:\Demux (D: should be an NTFS drive because the m2v file will be over 4GB)
Start VobEdit 0.6
Open c:\Rip\VTS_01_1.VOB
Click on "Demux" button
Check "Demux all Video streams" and "Demux all Audio streams" boxes
Click on "ok"
The target directory is of course D:\Demux
Quit
So you should now have
D:\Demux\VTS_01_1.m2v
D:\Demux\VTS_01_1.80.ac3
--------- Step 3 - Chapter infos --------
Use IfoEdit 0.96 to retrieve the chapter infos
Start IfoEdit 0.96
Open c:\Rip\VTS_01_0.IFO
In the upper window, double click on VTS_PGCITI.
VTS_PGC_1 appeared right below, click on it.
Now scroll the lower window until you see "PGC Command Table:", click on it.
Go in the main menu: "Tools/Save Celltimes to file"
Navigate in the savebox to save CellTimes.txt in D:\Demux
Quit
So you should now have
D:\Demux\VTS_01_1.m2v
D:\Demux\VTS_01_1.80.ac3
D:\Demux\CellTimes.txt
--------- Step 4 - Converting the subtitles --------
Use Str2Sup a4.03 to convert the Srt subtitles file into a Sup file
Start Str2Sup a4.03
In the main menu, choose SRT File/Open as text
Choose your SRT file.
Now in the dialog box, you can see an "adjust times" area. Usually "0" is fine, but you may have to tweak this a bit...
The easiest way is to open the Srt file in Notepad, look when is the 1st dialogue, then watch in your DVD player the time difference (if any).
Click on "ok".
In the main window, click on "All".
Now click on "Alter Subtitle Layout"
Click on "Global"
Change the colors and font settings to suit your tastes (if you don't, it will be green in the middle of the screen).
My settings are:
Backgnd: Black + Trans
Outline: Gray
Text: White
Antialias: Gray
Vertical Alignment: Bottom
Global Font: Arial 16
Others parameters left to default settings.
Don't forget to choose Screen Format according to the current DVD (PAL or NTSC).
Click on "ok"
Click on "close"
In the main menu, choose SUP File/Save
Target should be D:\Demux\VTS_01_1.20.sup
Write down the informations about the colors and quit, or keep that window open.
So you should now have
D:\Demux\VTS_01_1.m2v
D:\Demux\VTS_01_1.80.ac3
D:\Demux\VTS_01_1.20.sup
D:\Demux\CellTimes.txt
--------- Step 5 - Mux back -----------
Use IfoEdit 0.96 to mux what is in D:\Demux\ back into Vob files.
You can now delete C:\Rip.
Create C:\Full
Start IfoEdit 0.96
In the main menu, choose DVD Author/Author New DVD
In the right part, there is a dot button where you can choose the video file.
Choose D:\Demux\VTS_01_1.m2v
In the right part, there is a dot button where you can choose the audio file.
Choose D:\Demux\VTS_01_1.80.ac3
Then click on the ac3 file and choose its language (drop down box in the left part)
In the right part, there is a dot button where you can choose the subtitle file.
Choose D:\Demux\VTS_01_1.20.sup
Then click on the sup file and choose its language (drop down box in the left part)
In the right part, there is a dot button where you can choose the chapters file.
Choose D:\Demux\CellTimes.txt
Last, choose the destination, which of course is C:\Full.
Then click on "ok"
Later, click on "close"
In the upper window double click on VTS_01_0.IFO
Then double click on VTS_PGCITI.
VTS_PGC_1 appeared right below, click on it.
In the lower window, right below a lot of "Sub-picture steam x Status", you'll see "Color 0 Y Cr Cb".
Double click on it.
In the edit window, you'll see: "00000000 00 00 00 ...".
Click on the "00" pairs and fill with the Hex color informations from step 4
Repeat for "Color 1 Y Cr Cb", "Color 2 Y Cr Cb" and "Color 3 Y Cr Cb".
Click on "save", the default name is fine. You can say "yes" to the Bup question.
If you don't want to do Step 6, then quit IfoEdit now.
-------- Step 6 (optional) - Set "Subtitles On" as default ----------
This is only necessary if you want the subtitles to be displayed right at the beginning of the movie.
As we didn't copied the DVD's menus, I think this is quite convenient.
A little bit below the subtitles colors, you'll see "There is no PGC Command Table".
Then right click on that to display the context menu.
Choose "Add PreCommand".
Now you have a small PGC Command Table which ends with "1.Pre Command NOP".
Right click on "1.Pre Command NOP" and choose "Edit command".
In the list, change "NOP" to "(SetSTN) Set Subpicture Stream Nr"
Steam = 0, On/off = On
Click on "ok"
Save again.
Quit
***********************
D:\Demux is no longer useful, you can delete it.
C:\Full contains IFO and VOB files for our DVD with subtitles.
***********************
-------- Step 7 (very often mandatory) - Shrink -------------
Use DVD Shrink 3b5 to shrink our project (now in C:\Full) so it fits a DVD-R
Save it in D:\Shrinked
-------- Step 8 - Burn -------------
Use your favorite software (BurnAtOnce, Nero...) to burn what is in D:\Shrinked