smartctl -A /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
 
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000d   100   099   050    Pre-fail  Offline      -       8589934770
  2 Throughput_Performance  0x0005   100   075   050    Pre-fail  Offline      -       4030
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   081   081   050    Old_age   Always       -       19642
  5 Reallocated_Sector_Ct   0x0033   098   098   010    Pre-fail  Always       -       48
  7 Seek_Error_Rate         0x000f   100   100   050    Pre-fail  Always       -       627
  8 Seek_Time_Performance   0x0005   091   087   050    Pre-fail  Offline      -       1237
  9 Power_On_Minutes        0x0032   079   079   060    Old_age   Always       -       10950h+50m
 10 Spin_Retry_Count        0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   095   050    Old_age   Always       -       5944
191 G-Sense_Error_Rate      0x000a   100   100   050    Old_age   Always       -       1
192 Power-Off_Retract_Count 0x0032   099   099   050    Old_age   Always       -       646
193 Load_Cycle_Count        0x0032   001   001   050    Old_age   Always   FAILING_NOW 887766/887119
194 Temperature_Celsius     0x0022   094   042   000    Old_age   Always       -       43 (Lifetime Min/Max 69/14)
195 Hardware_ECC_Recovered  0x001a   100   060   050    Old_age   Always       -       507
196 Reallocated_Event_Count 0x0032   096   096   001    Old_age   Always       -       48
197 Current_Pending_Sector  0x0032   100   099   001    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   001    Old_age   Offline      -       1
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x0012   100   100   050    Old_age   Always       -       0
230 Head_Amplitude          0x0032   085   085   060    Old_age   Always       -       453981
250 Read_Error_Retry_Rate   0x000a   100   030   050    Old_age   Always   In_the_past 182

smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
 
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 67 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
 
Error 67 occurred at disk power-on lifetime: 7563 hours (315 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 03 5c 63 e0  Error: UNC at LBA = 0x00635c03 = 6511619
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 01 03 5c 63 e0 00      00:05:59.370  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:59.370  READ DMA
  40 00 02 05 5c 63 e0 00      00:05:59.350  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:59.350  READ DMA
  40 00 02 03 5c 63 e0 00      00:05:57.230  READ VERIFY SECTOR(S)
 
Error 66 occurred at disk power-on lifetime: 7563 hours (315 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 03 5c 63 e0  Error: UNC at LBA = 0x00635c03 = 6511619
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 02 03 5c 63 e0 00      00:05:57.230  READ VERIFY SECTOR(S)
  c8 00 01 3b 8b 38 e1 00      00:05:57.230  READ DMA
  40 00 04 03 5c 63 e0 00      00:05:55.130  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:55.130  READ DMA
  40 00 04 ff 5b 63 e0 00      00:05:55.130  READ VERIFY SECTOR(S)
 
Error 65 occurred at disk power-on lifetime: 7563 hours (315 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 03 5c 63 e0  Error: UNC at LBA = 0x00635c03 = 6511619
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 04 03 5c 63 e0 00      00:05:55.130  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:55.130  READ DMA
  40 00 04 ff 5b 63 e0 00      00:05:55.130  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:55.130  READ DMA
  40 00 08 07 5c 63 e0 00      00:05:55.110  READ VERIFY SECTOR(S)
 
Error 64 occurred at disk power-on lifetime: 7563 hours (315 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 03 5c 63 e0  Error: UNC at LBA = 0x00635c03 = 6511619
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 08 ff 5b 63 e0 00      00:05:52.970  READ VERIFY SECTOR(S)
  40 00 10 0f 5c 63 e0 00      00:05:52.950  READ VERIFY SECTOR(S)
  c8 00 01 3b 8b 38 e1 00      00:05:52.950  READ DMA
  40 00 10 ff 5b 63 e0 00      00:05:50.820  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:50.820  READ DMA
 
Error 63 occurred at disk power-on lifetime: 7563 hours (315 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0c 03 5c 63 e0  Error: UNC at LBA = 0x00635c03 = 6511619
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 10 ff 5b 63 e0 00      00:05:50.820  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:50.820  READ DMA
  40 00 20 1f 5c 63 e0 00      00:05:50.790  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:05:50.790  READ DMA
  40 00 20 ff 5b 63 e0 00      00:05:48.650  READ VERIFY SECTOR(S)

hdparm -tT /dev/hda
 
/dev/hda:
 Timing cached reads:   548 MB in  2.00 seconds = 273.44 MB/sec
 Timing buffered disk reads:    8 MB in  3.78 seconds =   2.12 MB/sec