Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2384 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  Hardware

  probleme avec nouveau portable toshiba U200-163 sous debian

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

probleme avec nouveau portable toshiba U200-163 sous debian

n°846852
thierry_b
Posté le 28-09-2006 à 20:34:24  profilanswer
 

Bonjour,
 
J'ai voulu installer une debian sur mon nouveau portable toshiba U200-163 et ca se passe très mal...
 
Rien à faire, il ne detectait pas du tout le réseau, je l'ai donc installé sans réseau avec la rc2 de debian sarge.
 
J'ai remarqué qu'avec une ubuntu live, j'avais le net, et donc j'ai booté dessus et en chrootant et donc en ayant le net, j'ai passé ma sarge en sid, installer qques noyaux 2.6.16,17,18 pour 686.
 
Au début, en bootant sur ces noyaux, ca plantait au niveau de l'acpi, j'ai donc rebooté sous ubuntu pour mettre acpi=off, pour les noyaux 2.6.16,17,18 en 686, mais là j'avais un truc du genre "smp motherboard not found et une erreur d'opcode sur le cpu, et plantage...
 
J'ai remarqué par la suite que qd ubuntu se charge, il passe en mode restricted drivers, etil utilise un linux image pour 386, j'ai donc essayé pour les noyau 2.6.16,17,18 de mettre la version 486 (la 386 n'existant pas) mais là ca plante à un autre endroit:
 
Pour le 2.6.18 par exemple, ca fait cela:
 
ide0: I/O ressource 0x1F0-0x1F7 not free
ide0: ports already in use skipping probe
begin: waiting for root system
usb 3-1 configuration #1 choosen from 1 choice
 
Avec le 2.6.17, j'ai ceci:
 
PnpBios: Scanning system for pnp bios support
PnpBios: Found PNP Bios installer structure 0xf00f09560
PnpBios: PnpBios bios version 1.0, entry 0xf00000: 0x9106, dseg 0x0
PnpBios: 14 nodes reported by pnp bios; 14 records by driver
PCI: Probing PCI Hardware
 
SInon ca boote en 2.6.8-3 cad le noyau de base de sarge, mais là ,j'ai pas de net.
 
Comme je suis en sid mnt, j'ai pas de 2.6.15 pour tester aec le mm noyau que celui d'uubuntu live...
 
Une idée? :-)
 
Merci bcp :-)

mood
Publicité
Posté le 28-09-2006 à 20:34:24  profilanswer
 

n°846919
thierry_b
Posté le 29-09-2006 à 00:51:50  profilanswer
 

Re,
 
Finalement, j'ai réessayé de me reinstaller la sarge en me disant que je paserai sous sid, quand tout fonctionnerait bien mais je ne sais pas si j'ai fait le bon choix quoiqu'il arrive, il vaut mieux que je repasse sous sid dès le départ cad avant qure le net remarche? (passer sous sid, en chrootant sur la debian depuis ubuntu live, et donc là j'ai le net, si j'utlise le dev,proc,sys d'ubuntu live).
 
Voila quelques infos, que j'ai recolté sur la ubuntu live où tout fonctionne (il reconnait eth0, eth1 en tout cas et ca a pas planté juste une fois sur 6 demarrages)
 
Euh, j'ai du lui mettre une clé usb, pour faire le copier coller des fichiers texte, d'où le sdb lol, sinon sous ubuntu, il reconnait le dd en sata apparemment, vu que c'est du sda:
 
dmesg:
 
4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[4294667.296000]  BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[4294667.296000]  BIOS-e820: 000000003f7a0000 - 000000003f7b0000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000003f7b0000 - 0000000040000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 00000000fec18000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fec20000 - 00000000fec28000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[4294667.296000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[4294667.296000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[4294667.296000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[4294667.296000] 119MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 260000
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 225280 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 30624 pages, LIFO batch:7
[4294667.296000] DMI 2.4 present.
[4294667.296000] ACPI: RSDP (v000 TOSHIB ) @ 0x000f01e0
[4294667.296000] ACPI: RSDT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x3f7a0000
[4294667.296000] ACPI: FADT (v002 TOSHIB 750      0x20030101 TASM 0x04010000) @ 0x3f7a0068
[4294667.296000] ACPI: SSDT (v001 TOSHIB A0044    0x20050926 MSFT 0x0100000e) @ 0x3f7a511c
[4294667.296000] ACPI: BOOT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x3f7a0040
[4294667.296000] ACPI: MADT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x3f7a5cd4
[4294667.296000] ACPI: MCFG (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x3f7a5d3c
[4294667.296000] ACPI: HPET (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x3f7a5dac
[4294667.296000] ACPI: DSDT (v001 TOSHIB A0044    0x20060301 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xd808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:14 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 6:14 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1 already used, trying 2
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- debian-installer/locale=fr kbd-chooser/method=fr-latin9
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Console: colour VGA+ 80x25
[4294667.296000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.296000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.296000] Memory: 1020176k/1040000k available (1976k kernel code, 19092k reserved, 606k data, 288k init, 122496k highmem)
[4294667.296000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.296000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
[4294667.296000] hpet0: 3 64-bit timers, 14318180 Hz
[4294667.296000] Using HPET for base-timer
[4294667.296000] Using HPET for gettimeofday
[4294667.296000] Detected 1662.689 MHz processor.
[4294667.296000] Using hpet for high-res timesource
[4294667.357000] Calibrating delay using timer specific routine.. 3328.06 BogoMIPS (lpj=1664032)
[4294667.357000] Security Framework v1.0.0 initialized
[4294667.357000] SELinux:  Disabled at boot.
[4294667.357000] Mount-cache hash table entries: 512
[4294667.357000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
[4294667.357000] CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
[4294667.357000] monitor/mwait feature present.
[4294667.357000] using mwait in idle threads.
[4294667.357000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294667.357000] CPU: L2 cache: 2048K
[4294667.357000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000040 0000c189 00000000 00000000
[4294667.357000] mtrr: v2.0 (20020519)
[4294667.357000] CPU: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
[4294667.357000] Enabling fast FPU save and restore... done.
[4294667.357000] Enabling unmasked SIMD FPU exception support... done.
[4294667.357000] Checking 'hlt' instruction... OK.
[4294667.361000] checking if image is initramfs... it is
[4294668.020000] Freeing initrd memory: 6838k freed
[4294668.024000] ACPI: Looking for DSDT ... not found!
[4294668.026000] ENABLING IO-APIC IRQs
[4294668.026000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.139000] NET: Registered protocol family 16
[4294668.139000] EISA bus registered
[4294668.139000] ACPI: bus type pci registered
[4294668.139000] PCI: PCI BIOS revision 2.10 entry at 0xfd27d, last bus=4
[4294668.139000] PCI: Using MMCONFIG
[4294668.139000] ACPI: Subsystem revision 20051216
[4294668.142000] ACPI: Interpreter enabled
[4294668.142000] ACPI: Using IOAPIC for interrupt routing
[4294668.142000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[4294668.143000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
[4294668.143000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
[4294668.143000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
[4294668.144000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
[4294668.144000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
[4294668.144000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
[4294668.145000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
[4294668.145000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.145000] PCI: Probing PCI hardware (bus 00)
[4294668.146000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.146000] Boot video device is 0000:00:02.0
[4294668.147000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294668.148000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.148000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.150000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294668.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[4294668.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
[4294668.152000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.152000] pnp: PnP ACPI init
[4294668.156000] pnp: PnP ACPI: found 13 devices
[4294668.156000] PnPBIOS: Disabled by ACPI PNP
[4294668.156000] PCI: Using ACPI for IRQ routing
[4294668.156000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294668.171000] pnp: 00:08: ioport range 0x1e0-0x1ef has been reserved
[4294668.171000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294668.171000] PCI: Bridge: 0000:00:1c.0
[4294668.171000]   IO window: disabled.
[4294668.171000]   MEM window: disabled.
[4294668.171000]   PREFETCH window: disabled.
[4294668.171000] PCI: Bridge: 0000:00:1c.2
[4294668.171000]   IO window: disabled.
[4294668.171000]   MEM window: ffc00000-ffcfffff
[4294668.171000]   PREFETCH window: disabled.
[4294668.171000] PCI: Bus 4, cardbus bridge: 0000:03:0b.0
[4294668.171000]   IO window: 0000b000-0000b0ff
[4294668.171000]   IO window: 0000b400-0000b4ff
[4294668.171000]   PREFETCH window: 50000000-51ffffff
[4294668.171000]   MEM window: 54000000-55ffffff
[4294668.171000] PCI: Bridge: 0000:00:1e.0
[4294668.171000]   IO window: b000-bfff
[4294668.171000]   MEM window: ffa00000-ffafffff
[4294668.171000]   PREFETCH window: 50000000-51ffffff
[4294668.171000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294668.171000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.171000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
[4294668.171000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.171000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.171000] PCI: Enabling device 0000:03:0b.0 (0000 -> 0003)
[4294668.171000] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) -> IRQ 185
[4294668.171000] Simple Boot Flag at 0x7c set to 0x1
[4294668.172000] audit: initializing netlink socket (disabled)
[4294668.172000] audit(1159489685.171:1): initialized
[4294668.172000] highmem bounce pool size: 64 pages
[4294668.172000] VFS: Disk quotas dquot_6.5.1
[4294668.172000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.172000] Initializing Cryptographic API
[4294668.172000] io scheduler noop registered
[4294668.172000] io scheduler anticipatory registered
[4294668.172000] io scheduler deadline registered
[4294668.172000] io scheduler cfq registered
[4294668.172000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294668.172000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.172000] assign_interrupt_mode Found MSI capability
[4294668.172000] Allocate Port Service[pcie00]
[4294668.172000] Allocate Port Service[pcie03]
[4294668.172000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
[4294668.172000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.172000] assign_interrupt_mode Found MSI capability
[4294668.172000] Allocate Port Service[pcie00]
[4294668.172000] Allocate Port Service[pcie03]
[4294668.172000] isapnp: Scanning for PnP cards...
[4294668.533000] isapnp: No Plug & Play device found
[4294668.545000] hpet_resources: 0xfed00000 is busy
[4294668.545000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.549000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.549000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.549000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.551000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294668.551000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.551000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.551000] mice: PS/2 mouse device common for all mice
[4294668.551000] EISA: Probing bus 0 at eisa.0
[4294668.551000] EISA: Detected 0 cards.
[4294668.551000] NET: Registered protocol family 2
[4294668.561000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.561000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.561000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.561000] TCP: Hash tables configured (established 131072 bind 65536)
[4294668.561000] TCP reno registered
[4294668.561000] TCP bic registered
[4294668.561000] NET: Registered protocol family 1
[4294668.561000] NET: Registered protocol family 8
[4294668.561000] NET: Registered protocol family 20
[4294668.561000] Using IPI Shortcut mode
[4294668.562000] ACPI wakeup devices:
[4294668.562000]  LAN USB1 USB3 USB4 EHCI AZAL GLAN  LID PWRB
[4294668.562000] ACPI: (supports S0 S3 S4 S5)
[4294668.562000] Freeing unused kernel memory: 288k freed
[4294668.578000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.607000] vga16fb: initializing
[4294668.607000] vga16fb: mapped to 0xc00a0000
[4294668.717000] Console: switching to colour frame buffer device 80x25
[4294668.717000] fb0: VGA16 VGA frame buffer device
[4294669.799000] Capability LSM initialized
[4294669.829000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294669.829000] ACPI: Thermal Zone [THRM] (31 C)
[4294670.207000] SCSI subsystem initialized
[4294670.208000] ACPI: bus type scsi registered
[4294670.208000] libata version 1.20 loaded.
[4294670.209000] ata_piix 0000:00:1f.2: version 1.05
[4294670.209000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294670.209000] ata_pci_init_one: NO_LEGACY == 0
[4294670.209000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
[4294670.209000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294670.209000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xAFA0 irq 14
[4294670.363000] ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3c09 87:6023 88:203f 93:0000
[4294670.363000] ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48
[4294670.363000] ata_acpi_push_id: skipping for PATA mode
[4294670.363000] ata1: dev 0 configured for UDMA/100
[4294670.363000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.363000] pata_get_dev_handle: dev_handle: 0xdfffbd60, parent_handle: 0xdfff79e0
[4294670.363000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff83a00, *handle=0xdfffbd60
[4294670.363000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdfff6880
[4294670.364000] scsi0 : ata_piix
[4294670.364000]   Vendor: ATA       Model: TOSHIBA MK8032GS  Rev: AS11
[4294670.364000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[4294670.364000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.364000] pata_get_dev_handle: dev_handle: 0xdfffbd60, parent_handle: 0xdfff79e0
[4294670.364000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff83a00, *handle=0xdfffbd60
[4294670.364000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xAFA8 irq 15
[4294670.670000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 93:4000
[4294670.670000] ata2: dev 0 ATAPI, max UDMA/33
[4294670.670000] ata2(0): applying bridge limits
[4294670.670000] ata_acpi_push_id: skipping for PATA mode
[4294670.670000] ata2: dev 0 configured for UDMA/33
[4294670.670000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.671000] pata_get_dev_handle: dev_handle: 0xdfffbd60, parent_handle: 0xdfff79e0
[4294670.671000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff83a00, *handle=0xdfffbd60
[4294670.671000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdfff6740
[4294670.672000] scsi1 : ata_piix
[4294670.674000]   Vendor: MATSHITA  Model: DVD-RAM UJ-842S   Rev: 1.01
[4294670.674000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[4294670.674000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.674000] pata_get_dev_handle: dev_handle: 0xdfffbd60, parent_handle: 0xdfff79e0
[4294670.674000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff83a00, *handle=0xdfffbd60
[4294670.681000] Driver 'sd' needs updating - please use bus_type methods
[4294670.686000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294670.686000] SCSI device sda: drive cache: write back
[4294670.689000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294670.689000] SCSI device sda: drive cache: write back
[4294670.689000]  sda: sda1 sda2 sda3
[4294671.142000] sd 0:0:0:0: Attached scsi disk sda
[4294671.158000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[4294671.158000] Uniform CD-ROM driver Revision: 3.20
[4294671.158000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294671.420000] usbcore: registered new driver usbfs
[4294671.420000] usbcore: registered new driver hub
[4294671.421000] USB Universal Host Controller Interface driver v2.3
[4294671.422000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
[4294671.422000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294671.422000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294671.422000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294671.422000] uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000cf80
[4294671.422000] hub 1-0:1.0: USB hub found
[4294671.422000] hub 1-0:1.0: 2 ports detected
[4294671.483000] ieee1394: Initialized config rom entry `ip1394'
[4294671.523000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
[4294671.523000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294671.523000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294671.523000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294671.523000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000cf60
[4294671.523000] hub 2-0:1.0: USB hub found
[4294671.523000] hub 2-0:1.0: 2 ports detected
[4294671.624000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
[4294671.624000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294671.624000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294671.624000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294671.624000] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000cf40
[4294671.624000] hub 3-0:1.0: USB hub found
[4294671.624000] hub 3-0:1.0: 2 ports detected
[4294671.725000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 233
[4294671.725000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294671.725000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294671.725000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294671.725000] uhci_hcd 0000:00:1d.3: irq 233, io base 0x0000cf20
[4294671.725000] hub 4-0:1.0: USB hub found
[4294671.725000] hub 4-0:1.0: 2 ports detected
[4294671.828000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
[4294671.828000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294671.828000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294671.828000] ehci_hcd 0000:00:1d.7: debug port 1
[4294671.828000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294671.828000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294671.828000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xffd3fc00
[4294671.830000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[4294671.832000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294671.832000] hub 5-0:1.0: USB hub found
[4294671.832000] hub 5-0:1.0: 8 ports detected
[4294671.933000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294671.933000] PCI: Enabling device 0000:03:0b.1 (0000 -> 0002)
[4294671.933000] ACPI: PCI Interrupt 0000:03:0b.1[B] -> GSI 20 (level, low) -> IRQ 50
[4294671.984000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[ffa06000-ffa067ff]  Max Packet=[2048]
[4294672.017000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294672.017000] ide0: ports already in use, skipping probe
[4294672.017000] ide1: I/O resource 0x170-0x177 not free.
[4294672.017000] ide1: ports already in use, skipping probe
[4294672.330000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[4294673.240000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00003900007bca26]
[4294676.052000] end_request: I/O error, dev sr0, sector 1429792
[4294676.052000] Buffer I/O error on device sr0, logical block 357448
[4294676.627000] end_request: I/O error, dev sr0, sector 1429792
[4294676.627000] Buffer I/O error on device sr0, logical block 357448
[4294676.832000] end_request: I/O error, dev sr0, sector 1429792
[4294676.832000] Buffer I/O error on device sr0, logical block 357448
[4294677.034000] end_request: I/O error, dev sr0, sector 1429792
[4294677.034000] Buffer I/O error on device sr0, logical block 357448
[4294678.106000] end_request: I/O error, dev sr0, sector 1429792
[4294678.106000] Buffer I/O error on device sr0, logical block 357448
[4294678.298000] end_request: I/O error, dev sr0, sector 1429792
[4294678.298000] Buffer I/O error on device sr0, logical block 357448
[4294678.633000] end_request: I/O error, dev sr0, sector 1429788
[4294678.633000] Buffer I/O error on device sr0, logical block 357447
[4294678.826000] end_request: I/O error, dev sr0, sector 1429788
[4294678.826000] Buffer I/O error on device sr0, logical block 357447
[4294679.305000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294679.395000] ISO 9660 Extensions: RRIP_1991A
[4294679.479000] loop: loaded (max 8 devices)
[4294679.499000] Registering unionfs 1.1.2
[4294679.625000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294768.967000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294768.967000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294768.967000] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 50
[4294769.003000] e100: eth0: e100_probe: addr 0xffaff000, irq 50, MAC addr 00:0E:7B:AC:A6:97
[4294792.814000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294793.386000] Linux agpgart interface v0.101 (c) Dave Jones
[4294793.459000] agpgart: Detected an Intel 945GM Chipset.
[4294793.459000] agpgart: Detected 7932K stolen memory.
[4294793.484000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294793.619000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294793.958000] Real Time Clock Driver v1.12
[4294793.972000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294793.972000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[4294794.051000] input: PS/2 Mouse as /class/input/input1
[4294794.083000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
[4294794.513000] hw_random: RNG not detected
[4294794.871000] NET: Registered protocol family 17
[4294795.674000] input: PC Speaker as /class/input/input3
[4294795.679000] ts: Compaq touchscreen protocol output
[4294796.336000] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
[4294796.336000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
[4294796.336000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294796.532000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[4294796.533000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[4294796.533000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294796.971000] ieee80211_crypt: registered algorithm 'NULL'
[4294797.042000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294797.042000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294797.950000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294797.950000] sdhci: Copyright(c) Pierre Ossman
[4294797.950000] PCI: Enabling device 0000:03:0b.3 (0000 -> 0002)
[4294797.950000] ACPI: PCI Interrupt 0000:03:0b.3[D] -> GSI 23 (level, low) -> IRQ 225
[4294798.034000] sdhci: ============== REGISTER DUMP ==============
[4294798.034000] sdhci: Sys addr: 0x00000000 | Version:  0x00008900
[4294798.034000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294798.034000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294798.034000] sdhci: Present:  0x000a0000 | Host ctl: 0x00000000
[4294798.034000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294798.034000] sdhci: Walk up:  0x00000000 | Clock:    0x00000000
[4294798.034000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294798.034000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294798.034000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294798.034000] sdhci: Caps:     0x01c030b0 | Max curr: 0x00000000
[4294798.034000] sdhci: ===========================================
[4294798.084000] mmc0: SDHCI at 0xffa06800 irq 225 DMA
[4294799.029000] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) -> IRQ 185
[4294799.029000] Yenta: CardBus bridge found at 0000:03:0b.0 [1179:0001]
[4294799.029000] Yenta: Enabling burst memory read transactions
[4294799.029000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294799.029000] Yenta: Routing CardBus interrupts to PCI
[4294799.029000] Yenta TI: socket 0000:03:0b.0, mfunc 0x01aa1022, devctl 0x64
[4294799.252000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[4294799.252000] Socket status: 30000006
[4294799.252000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[4294799.252000] pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff
[4294799.252000] cs: IO port probe 0xb000-0xbfff: clean.
[4294799.253000] pcmcia: parent PCI bridge Memory window: 0xffa00000 - 0xffafffff
[4294799.253000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[4294799.559000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.3m
[4294799.559000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[4294799.560000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 177
[4294799.560000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[4294799.560000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[4294800.018000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
[4294800.020000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[4294800.021000] cs: IO port probe 0x820-0x8ff: clean.
[4294800.022000] cs: IO port probe 0xc00-0xcf7: clean.
[4294800.023000] cs: IO port probe 0xa00-0xaff: clean.
[4294800.945000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[4294801.214000] Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
[4294801.687000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294801.687000] md: bitmap version 4.39
[4294802.100000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294806.291000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4294813.276000] ACPI: AC Adapter [ADP1] (off-line)
[4294813.455000] ACPI: Battery Slot [BAT1] (battery present)
[4294813.506000] ACPI: Power Button (FF) [PWRF]
[4294813.506000] ACPI: Lid Switch [LID]
[4294813.506000] ACPI: Power Button (CM) [PWRB]
[4294813.588000] ibm_acpi: ec object not found
[4294813.607000] pcc_acpi: loading...
[4294813.661000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[4294813.661000] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
[4294813.662000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[4294813.662000] toshiba_acpi: ktoshkeyd will check 2 times per second
[4294813.663000] toshiba_acpi: Dropped 0 keys from the queue on startup
[4294813.679000] ACPI: Video Device [VGA] (multi-head: yes  rom: yes post: no)
[4294822.235000] [drm] Initialized drm 1.0.1 20051102
[4294822.575000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 233
[4294822.575000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[4294832.855000] lp: driver loaded but no devices found
[4294833.188000] ppdev: user-space parallel port driver
[4294834.897000] apm: BIOS not found.
[4294846.467000] Bluetooth: Core ver 2.8
[4294846.467000] NET: Registered protocol family 31
[4294846.467000] Bluetooth: HCI device and connection manager initialized
[4294846.467000] Bluetooth: HCI socket layer initialized
[4294846.959000] Bluetooth: L2CAP ver 2.8
[4294846.959000] Bluetooth: L2CAP socket layer initialized
[4294847.327000] Bluetooth: RFCOMM socket layer initialized
[4294847.327000] Bluetooth: RFCOMM TTY layer initialized
[4294847.327000] Bluetooth: RFCOMM ver 1.7
[4294849.632000] NET: Registered protocol family 10
[4294849.632000] lo: Disabled Privacy Extensions
[4294849.632000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294849.632000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4294849.632000] IPv6 over IPv4 tunneling driver
[4294956.990000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294957.359000] NTFS volume version 3.1.
[4295075.146000] usb 5-1: new high speed USB device using ehci_hcd and address 3
[4295078.111000] Initializing USB Mass Storage driver...
[4295078.111000] scsi2 : SCSI emulation for USB Mass Storage devices
[4295078.111000] usb-storage: device found at 3
[4295078.111000] usb-storage: waiting for device to settle before scanning
[4295078.111000] usbcore: registered new driver usb-storage
[4295078.111000] USB Mass Storage support registered.
[4295083.112000]   Vendor: Generic   Model: USB Flash Disk    Rev: 0.00
[4295083.112000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[4295083.113000] SCSI device sdb: 983808 512-byte hdwr sectors (504 MB)
[4295083.114000] sdb: Write Protect is off
[4295083.114000] sdb: Mode Sense: 00 00 00 00
[4295083.114000] sdb: assuming drive cache: write through
[4295083.116000] SCSI device sdb: 983808 512-byte hdwr sectors (504 MB)
[4295083.117000] sdb: Write Protect is off
[4295083.117000] sdb: Mode Sense: 00 00 00 00
[4295083.117000] sdb: assuming drive cache: write through
[4295083.117000]  sdb: sdb1
[4295083.146000] sd 2:0:0:0: Attached scsi removable disk sdb
[4295083.146000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[4295083.147000] usb-storage: device scan complete
[4295083.960000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
 
---------------------------------------------------------------------
lsmod
 
nls_utf8                2176  1
vfat                   13440  1
fat                    53020  1 vfat
usb_storage            74176  1
ntfs                  103536  0
ipv6                  265600  6
rfcomm                 40216  0
l2cap                  26244  5 rfcomm
bluetooth              49892  4 rfcomm,l2cap
ppdev                   9220  0
parport_pc             35780  0
lp                     11844  0
parport                36296  3 ppdev,parport_pc,lp
i915                   20608  1
drm                    73236  2 i915
speedstep_centrino      8400  1
cpufreq_userspace       4696  1
cpufreq_stats           5636  0
freq_table              4740  2 speedstep_centrino,cpufreq_stats
cpufreq_powersave       1920  0
cpufreq_ondemand        6428  0
cpufreq_conservative     7332  0
video                  16260  0
toshiba_acpi           10940  0
tc1100_wmi              6916  0
sony_acpi               5644  0
pcc_acpi               12416  0
hotkey                 11556  0
dev_acpi               11140  0
container               4608  0
button                  6672  0
acpi_sbs               19980  0
battery                 9988  1 acpi_sbs
i2c_acpi_ec             5120  1 acpi_sbs
i2c_core               21904  1 i2c_acpi_ec
ac                      5252  1 acpi_sbs
dm_mod                 58936  1
md_mod                 72532  0
ipw3945               126492  1
pcmcia                 40508  0
joydev                 10048  0
yenta_socket           28428  1
rsrc_nonstatic         13440  1 yenta_socket
sdhci                  14848  0
mmc_core               30104  1 sdhci
pcmcia_core            42640  3 pcmcia,yenta_socket,rsrc_nonstatic
ieee80211              37064  1 ipw3945
ieee80211_crypt         6272  1 ieee80211
ieee80211_1_1_13       38216  0
ieee80211_1_1_13_crypt     6784  1 ieee80211_1_1_13
snd_hda_intel          18964  1
snd_hda_codec         142640  1 snd_hda_intel
snd_pcm_oss            53664  0
snd_mixer_oss          18688  1 snd_pcm_oss
snd_pcm                89864  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
tsdev                   8000  0
pcspkr                  2180  0
snd_timer              25220  1 snd_pcm
af_packet              22920  4
sg                     37920  0
serio_raw               7300  0
rtc                    13492  0
shpchp                 45632  0
psmouse                36228  0
intel_agp              22940  1
agpgart                34888  3 drm,intel_agp
snd                    55268  8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
pci_hotplug            29236  1 shpchp
soundcore              10208  1 snd
snd_page_alloc         10632  2 snd_hda_intel,snd_pcm
evdev                   9856  2
e100                   40580  0
mii                     5888  1 e100
squashfs               44980  1
unionfs                89884  1
loop                   17288  2
nls_cp437               5888  2
isofs                  37688  1
ide_generic             1536  0
ohci1394               35124  0
ieee1394              299832  1 ohci1394
ehci_hcd               32008  0
uhci_hcd               33680  0
usbcore               129668  4 usb_storage,ehci_hcd,uhci_hcd
sr_mod                 16932  1
cdrom                  38560  1 sr_mod
sd_mod                 19984  4
generic                 5124  0
ata_piix               11012  5
libata                 78992  1 ata_piix
scsi_mod              139496  5 usb_storage,sg,sr_mod,sd_mod,libata
thermal                13576  0
processor              23360  2 speedstep_centrino,thermal
fan                     4868  0
capability              5000  0
commoncap               7296  1 capability
vga16fb                13704  1
vgastate               10368  1 vga16fb
fbcon                  42784  72
tileblit                2816  1 fbcon
font                    8320  1 fbcon
bitblit                 6272  1 fbcon
softcursor              2304  1 bitblit
----------------------------------------------------------------------
 
 
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02)
0000:02:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
0000:03:08.0 Ethernet controller: Intel Corporation: Unknown device 1092 (rev 02)
0000:03:0b.0 CardBus bridge: Texas Instruments: Unknown device 8039
0000:03:0b.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a
0000:03:0b.2 Mass storage controller: Texas Instruments: Unknown device 803b
0000:03:0b.3 0805: Texas Instruments: Unknown device 803c
--------------------------------------------------------------------------
 
uname -a
 
Linux ubuntu 2.6.15-23-386 #1 PREEMPT Tue May 23 13:49:40 UTC 2006 i686 GNU/Linux
 
-------------------------------------------------------------------------
 
Voila...
 
J'attends vos conseils (sachant comme j'ai dit que là je suis sur une sarge neuve que j'ai remise avec une image 2.6.8-2 386 je crois, et ca boote sans planter, mais pas le net.
 
Je pense quand mm qu'il y a un truc qu'il doit pas aimer dans le proc qui est un core duo, pq c'est bizarre qu'avec le 2.6.8 version 386 c'est nikel et pas avec les autres (sachant que le noyau d'ubuntu fonctionnel c aussi pour 386), donc il aimerait les trucs plus generiques que du 686 par exemple.
 
J'attends vos sugestions :)
 
Merci :-)

n°847099
thierry_b
Posté le 29-09-2006 à 15:09:27  profilanswer
 

Grace à ca: http://wiki.debian.org/DebianInsta [...] %28sata%29
 
J'ai pu résoudre le pb en bootant avec l'option: "install libata.atapi_enabled=1" avec le cd de la dernière debian etch.
 
et pendant l'install, il m'a detecté nikel mes 2 cartes réseaux + cdrom et dd sata.
 
Le soucis, c'est juste après la procédure d'install, quand on reboote sans le cd, il boote bien et juste avant la fin, il arrete pas d'ecrire:
azx_get_response timeout, infiniment, et donc ca ne boote tjs pas :-(
 
Une idée? :-)
 
Merci :-)

n°847156
thierry_b
Posté le 29-09-2006 à 17:03:28  profilanswer
 

Je suis passé en sid, et là il m'a upgradé le 2.6.16 et mis le 2.6.17.
 
Le 2.6.16 marche tjs nikel, mais le 2.6.17 fait planter la machine.
 
A partir du 2.6.16, j'ai mis le 2.6.18 qui lui aussi marche nikel.
 
C'est dommage, je peux pas virer le 2.6.17, pq sinon y'a une dependance non satisfaite lol, donc on va devoir attendre l'evolution des paquets, pour pouvoir un jour, virer ce 2.6.17 en toute tranquilité, qui m'embete vu qu'il me fait une entree grub pour rien lol.
 
Un autre soucis: je viens d'installer xorg et mnt, il me dit qd il essaie de le configurer:
 
Valeur obligatoire
 
"Une valeur vide n'est pas autorisée pour ce paramètre" avec une touche ok, et quand j'appuie sur "ok", rien à faire, ça reste là et ca force à rebooter...
 
ET bien sure, après si je fais aptitude update, il me dit de faire un dpkg-configure -a ou un truc de ce genre, vu que la config des paquets a été interrompue, mais boum, je retombe sur le problème de la config de xserver-xorg, qui me rebloque...
 
Une idée?
 
Merci :-)


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  Hardware

  probleme avec nouveau portable toshiba U200-163 sous debian

 

Sujets relatifs
problème transfert de fichier [ubuntu][résolu]problème avec konsole
localhost problème installationProblème reseau 300 machines, vos conseils
LFS: problème avec la gestion d'utilisateurProbleme avec Cacti
PPTP sous debian sarge en kernel 2.6.18debian configurer le fichier sources.list
probleme SNMPQuels paquets après install Debian ?
Plus de sujets relatifs à : probleme avec nouveau portable toshiba U200-163 sous debian


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR