Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
4512 connectés 

 


 Mot :   Pseudo :  
  Aller à la page :
 
 Page :   1  2  3  4  5  ..  1127  1128  1129  ..  1408  1409  1410  1411  1412  1413
Auteur Sujet :

[AMD 64 Force]Thread des A64FX et des A64+ The 3D Performers

n°1214109
PeGGaaSuSS
Posté le 06-03-2005 à 00:35:28  profilanswer
 

Reprise du message précédent :
 
Juste pour info je sais pas si c'est sortis y'a des EpoX 9NDA 3+ Rev 2.X chez Surcouf Daumesnil.

mood
Publicité
Posté le 06-03-2005 à 00:35:28  profilanswer
 

n°1214110
skirms_fr
quand on est con c pour la vie
Posté le 06-03-2005 à 00:36:44  profilanswer
 

et des dfi y en a ? :D


---------------
My Cascade  N°1 / My Cascade  N°2
n°1214111
pierrotlem​aboule
Posté le 06-03-2005 à 00:37:14  profilanswer
 

PeGGaaSuSS a écrit :

Juste pour info je sais pas si c'est sortis y'a des EpoX 9NDA 3+ Rev 2.X chez Surcouf Daumesnil.


oui dispo depuis pas mal de temps :)


---------------
mon topic de vente
n°1214115
cpulloverc​lock
Posté le 06-03-2005 à 00:40:25  profilanswer
 

tjs pas de 9NPA+ rev2


---------------
:)
n°1214116
pierrotlem​aboule
Posté le 06-03-2005 à 00:42:49  profilanswer
 

skirms_fr a écrit :

et des dfi y en a ? :D


oui mais tres chere [:pierrotlemaboule]


---------------
mon topic de vente
n°1214135
Out4L
Posté le 06-03-2005 à 01:22:01  profilanswer
 

pierrotlemaboule a écrit :

oui dispo depuis pas mal de temps :)


 
+²°°°

n°1214136
pierrotlem​aboule
Posté le 06-03-2005 à 01:26:13  profilanswer
 


la flemme de monter la dfi :sleep:


---------------
mon topic de vente
n°1214138
frodonmike
Posté le 06-03-2005 à 01:40:56  profilanswer
 

cpulloverclock a écrit :

tjs pas de 9NPA+ rev2


 
elle a quoi la rev 1 ?

n°1214139
podadan
Eleveur de PC en liberté
Posté le 06-03-2005 à 01:44:20  profilanswer
 


 
 :??: pas compris, tu peu pas t'exprimer plus clairement  :o  
 

0DiGy a écrit :


le 2T c'est pas intéressant..
sinon 300 cas 2 sors en moi mais il doit pas y en avoir bcp même si tu lui mets des volts, mais tu parles de stable ou de screen? car il y a une diff..


 
330 Oui c'est en 2T, mais comme je l'ai dit ya des autres freq très élevée ateintent en 1T. Regarde un peu là :
http://www.nokytech.net/forum/showthread.php?t=53414
Et cherche un peu sur les forum Anglophones, avec 3,5v-3,6v on peu approcher les 300 en Cas2 et en 1T  :pt1cable:  
 
SINON JE PARLAIS DE STABLE, tu lis ce que tu veu toi  :pfff:  
 
Et un autre argument pour l'UTT est la perf à fréquence égale avec le TCCD :
 

Citation :


"Some of you may recall in the last days of BH5 memory last year that BH5 actually performed faster than the new Samsung TCCD at the exact same memory timings. This is a pattern that we have seen before, but OCZ 4000 VX Gold blows the hinges off the door of this concept. What can you say about a memory that outperforms the fastest memory that you have previously tested, except "wow"? What replaces "wow" when you realize that OCZ VX running at DDR533 outperforms the previous best running at DDR610? There are no superlatives that really do justice to this kind of performance. We are absolutely blown away with the performance of the OCZ DDR500 VX.
 
Across the board from DDR400 to DDR538, VX manages to perform with stability in all our benchmarks at 2-2-2-6 timings. In addition, it is faster at the same timings than any memory that we have tested so far. This is why DDR533 outperforms the top TCCD memory - even those specially binned for highest-speed performance. We would also add that we did try slower timings to see where we could go, but this memory is very interesting in its performance curves. It can do, at 2-2-2 at high voltage, essentially the same as the highest OC at lower timings at any voltage. This is another way of saying that there is absolutely no reason to run VX at any timings other than 2-2-2 - unless you simply don't have the voltage to reach 2-2-2 performance.
 
 
In the end, OCZ VX Gold is the best performing memory that we have tested on the Athlon 64 platform. At the same speed and same timings, it significantly outperforms any other memory that we have tested on A64. VX does not run at the fastest memory speeds that we have found in our benchmarks - quite a few memories based on Samsung TCCD or Hynix memory chips reach significantly higher speeds than the DDR538 of OCZ VX Gold. However, at DDR534 2-2-2-6 timings, no memory that we have tested outperforms VX. VX is so fast that 533 actually outperforms memory that have achieved DDR600 or more in our memory tests.
 
If you are a raving enthusiast, you will have to have OCZ VX memory. If you are considering a DFI nForce4 purchase, then VX should be at the top of your memory list. If you want top performance, then you should at least consider OCZ Gold VX even if it requires a DDR Booster to run. Yes, OCZ PC4000 VX Gold is that good!"


 
Fait un tour sur www.anandtech.com
 
 


Message édité par podadan le 06-03-2005 à 01:46:42
n°1214141
skirms_fr
quand on est con c pour la vie
Posté le 06-03-2005 à 01:46:25  profilanswer
 

pierrotlemaboule a écrit :

la flemme de monter la dfi :sleep:


 
envois  :whistle:  [:atari]


---------------
My Cascade  N°1 / My Cascade  N°2
mood
Publicité
Posté le 06-03-2005 à 01:46:25  profilanswer
 

n°1214142
pierrotlem​aboule
Posté le 06-03-2005 à 01:52:11  profilanswer
 

podadan a écrit :

:??: pas compris, tu peu pas t'exprimer plus clairement  :o  
 
 
 
330 Oui c'est en 2T, mais comme je l'ai dit ya des autres freq très élevée ateintent en 1T. Regarde un peu là :
http://www.nokytech.net/forum/showthread.php?t=53414
Et cherche un peu sur les forum Anglophones, avec 3,5v-3,6v on peu approcher les 300 en Cas2 et en 1T  :pt1cable:  
 
SINON JE PARLAIS DE STABLE, tu lis ce que tu veu toi  :pfff:  
 
Et un autre argument pour l'UTT est la perf à fréquence égale avec le TCCD :
 

Citation :


"Some of you may recall in the last days of BH5 memory last year that BH5 actually performed faster than the new Samsung TCCD at the exact same memory timings. This is a pattern that we have seen before, but OCZ 4000 VX Gold blows the hinges off the door of this concept. What can you say about a memory that outperforms the fastest memory that you have previously tested, except "wow"? What replaces "wow" when you realize that OCZ VX running at DDR533 outperforms the previous best running at DDR610? There are no superlatives that really do justice to this kind of performance. We are absolutely blown away with the performance of the OCZ DDR500 VX.
 
Across the board from DDR400 to DDR538, VX manages to perform with stability in all our benchmarks at 2-2-2-6 timings. In addition, it is faster at the same timings than any memory that we have tested so far. This is why DDR533 outperforms the top TCCD memory - even those specially binned for highest-speed performance. We would also add that we did try slower timings to see where we could go, but this memory is very interesting in its performance curves. It can do, at 2-2-2 at high voltage, essentially the same as the highest OC at lower timings at any voltage. This is another way of saying that there is absolutely no reason to run VX at any timings other than 2-2-2 - unless you simply don't have the voltage to reach 2-2-2 performance.
 
 
In the end, OCZ VX Gold is the best performing memory that we have tested on the Athlon 64 platform. At the same speed and same timings, it significantly outperforms any other memory that we have tested on A64. VX does not run at the fastest memory speeds that we have found in our benchmarks - quite a few memories based on Samsung TCCD or Hynix memory chips reach significantly higher speeds than the DDR538 of OCZ VX Gold. However, at DDR534 2-2-2-6 timings, no memory that we have tested outperforms VX. VX is so fast that 533 actually outperforms memory that have achieved DDR600 or more in our memory tests.
 
If you are a raving enthusiast, you will have to have OCZ VX memory. If you are considering a DFI nForce4 purchase, then VX should be at the top of your memory list. If you want top performance, then you should at least consider OCZ Gold VX even if it requires a DDR Booster to run. Yes, OCZ PC4000 VX Gold is that good!"


 
Fait un tour sur www.anandtech.com


 [:rofl]


---------------
mon topic de vente
n°1214143
Overcrash
Posté le 06-03-2005 à 01:55:23  profilanswer
 
n°1214144
skirms_fr
quand on est con c pour la vie
Posté le 06-03-2005 à 01:55:33  profilanswer
 


 
[:rofl] =>>> pour anandtech a mon avi  :whistle:


---------------
My Cascade  N°1 / My Cascade  N°2
n°1214145
pierrotlem​aboule
Posté le 06-03-2005 à 01:58:05  profilanswer
 

skirms_fr a écrit :

[:rofl] =>>> pour anandtech a mon avi  :whistle:


anandtech + nokytech = branlette sur orgie  [:aloy]


Message édité par pierrotlemaboule le 06-03-2005 à 01:58:18

---------------
mon topic de vente
n°1214147
podadan
Eleveur de PC en liberté
Posté le 06-03-2005 à 02:29:07  profilanswer
 


 

pierrotlemaboule a écrit :

anandtech + nokytech = branlette sur orgie  [:aloy]


 
C'est vrai que anandtech sont pas des pro de l'oc quand on vois à quel FSB/CPU ils oc les cartes, mais pour bencher ils sont OK.
C'est vrai que ces ram s'exprime mieux en 2-2-2-x donc finalement c'est peut-etre pas intéressant de les monter à 300MHz.
 
Pour Noky c'est un peu facile de cracher sur tout le monde ya des bons et des mauvais, comme sur HFR :o
C'est un peu facile de rigoler comme ca sans apporter quoi que ce soit comme argument :pfff:
 
Sinon jettai aussi un coup d'oeil ici : http://xtremesystems.org/forums/showthread.php?t=50699
 
En moyenne c'est quand meme 265MHz en dual 2-2-2-x 1T sur 939 à 3.6V  :ouch:


Message édité par podadan le 06-03-2005 à 02:30:37
n°1214151
computersm​sa
Posté le 06-03-2005 à 03:12:59  profilanswer
 

podadan a écrit :

:??: pas compris, tu peu pas t'exprimer plus clairement  :o  
 
 
 
330 Oui c'est en 2T, mais comme je l'ai dit ya des autres freq très élevée ateintent en 1T. Regarde un peu là :
http://www.nokytech.net/forum/showthread.php?t=53414
Et cherche un peu sur les forum Anglophones, avec 3,5v-3,6v on peu approcher les 300 en Cas2 et en 1T  :pt1cable:  
 
SINON JE PARLAIS DE STABLE, tu lis ce que tu veu toi  :pfff:  
 
Et un autre argument pour l'UTT est la perf à fréquence égale avec le TCCD :
 

Citation :


"Some of you may recall in the last days of BH5 memory last year that BH5 actually performed faster than the new Samsung TCCD at the exact same memory timings. This is a pattern that we have seen before, but OCZ 4000 VX Gold blows the hinges off the door of this concept. What can you say about a memory that outperforms the fastest memory that you have previously tested, except "wow"? What replaces "wow" when you realize that OCZ VX running at DDR533 outperforms the previous best running at DDR610? There are no superlatives that really do justice to this kind of performance. We are absolutely blown away with the performance of the OCZ DDR500 VX.
 
Across the board from DDR400 to DDR538, VX manages to perform with stability in all our benchmarks at 2-2-2-6 timings. In addition, it is faster at the same timings than any memory that we have tested so far. This is why DDR533 outperforms the top TCCD memory - even those specially binned for highest-speed performance. We would also add that we did try slower timings to see where we could go, but this memory is very interesting in its performance curves. It can do, at 2-2-2 at high voltage, essentially the same as the highest OC at lower timings at any voltage. This is another way of saying that there is absolutely no reason to run VX at any timings other than 2-2-2 - unless you simply don't have the voltage to reach 2-2-2 performance.
 
 
In the end, OCZ VX Gold is the best performing memory that we have tested on the Athlon 64 platform. At the same speed and same timings, it significantly outperforms any other memory that we have tested on A64. VX does not run at the fastest memory speeds that we have found in our benchmarks - quite a few memories based on Samsung TCCD or Hynix memory chips reach significantly higher speeds than the DDR538 of OCZ VX Gold. However, at DDR534 2-2-2-6 timings, no memory that we have tested outperforms VX. VX is so fast that 533 actually outperforms memory that have achieved DDR600 or more in our memory tests.
 
If you are a raving enthusiast, you will have to have OCZ VX memory. If you are considering a DFI nForce4 purchase, then VX should be at the top of your memory list. If you want top performance, then you should at least consider OCZ Gold VX even if it requires a DDR Booster to run. Yes, OCZ PC4000 VX Gold is that good!"


 
Fait un tour sur www.anandtech.com


 
Aucun chip Winbond, on autre ne fait + de 280 MHz stable (Stable à 100%, le vraix sens du mot).
Même avec 4V ;)
 
Certain kit d'exeption (3-4 sur la terre), bench à 290 MHz en 2*256Mo mais c'est tout.
 
Alors stop la branlette ;)


Message édité par computersmsa le 06-03-2005 à 03:15:47
n°1214159
podadan
Eleveur de PC en liberté
Posté le 06-03-2005 à 03:43:01  profilanswer
 

computersmsa a écrit :

Aucun chip Winbond, on autre ne fait + de 280 MHz stable (Stable à 100%, le vraix sens du mot).
Même avec 4V ;)
 
Certain kit d'exeption (3-4 sur la terre), bench à 290 MHz en 2*256Mo mais c'est tout.
 
Alors stop la branlette ;)


 
J'ai vraiment l'impression parler dans une cour d’école  :(  je perd mon temps  ou quoi :pfff:  
Regarde les screens avec 35pass de memtest et vois que tu as tord...

n°1214165
AMD_Eclect​ik
Posté le 06-03-2005 à 07:09:28  profilanswer
 

podadan a écrit :

J'ai vraiment l'impression parler dans une cour d’école  :(  je perd mon temps  ou quoi :pfff:  
Regarde les screens avec 35pass de memtest et vois que tu as tord...


 
Si tu parles de 35 pass du test #5, sache que ce n'est pas suffisant, et que, arrivé dans ton OS tu peux éssuyer une instabilité.
 
 
Autrement, le test du Turion en exclu
http://xtremesystems.org/forums/showthread.php?t=55174
 
Je ne sais pas si le voltage est lu correctement, mais le proco prends 400 mhz avec 0.4v de moins  :ouch:  
 
ECK


---------------
http://www.oc-tuning.com
n°1214166
facedehari​cot
Posté le 06-03-2005 à 07:15:18  profilanswer
 

podadan a écrit :

:o  ya des screens stable memtest à 330MHz avec de la UTT en Cas 2 ou 2.5. En 2T OK mais quand m^me.
 
Les bonnes UTT montent à 300 avec du voltage en cas 2.5 voir même en cas 2  si c'est un très bon step. Et là je parle en 1T ;)


 
 
pas avec un coeff entier  [:aloy]

n°1214171
cpulloverc​lock
Posté le 06-03-2005 à 09:08:04  profilanswer
 

mes barrettes en timings a fond cest stable a 275
avec le twr a 3 cest ok 279
 
en 2T peut etre + de 280 mais jevite car ce que je recherche ce sont les perfs max


Message édité par cpulloverclock le 06-03-2005 à 09:09:25

---------------
:)
n°1214179
Sanozuke
Ailé !
Posté le 06-03-2005 à 10:06:57  profilanswer
 

Citation :

Autrement, le test du Turion en exclu
http://xtremesystems.org/forums/showthread.php?t=55174
 
Je ne sais pas si le voltage est lu correctement, mais le proco prends 400 mhz avec 0.4v de moins  :ouch:  
 
ECK


 
Va falloir ressortir la DFI en s754 !! :sol:

n°1214191
divinours8​1
Posté le 06-03-2005 à 10:37:43  profilanswer
 

je met en vente mes bh5 recement reçu si il y a des intéréssé sa se passe sur le topic qui suit
 
http://forum.hardware.fr/hardwaref [...] 9904-1.htm


Message édité par divinours81 le 06-03-2005 à 10:38:31
n°1214227
computersm​sa
Posté le 06-03-2005 à 12:20:43  profilanswer
 

AMD_Eclectik a écrit :

Si tu parles de 35 pass du test #5, sache que ce n'est pas suffisant, et que, arrivé dans ton OS tu peux éssuyer une instabilité.
 
 
Autrement, le test du Turion en exclu
http://xtremesystems.org/forums/showthread.php?t=55174
 
Je ne sais pas si le voltage est lu correctement, mais le proco prends 400 mhz avec 0.4v de moins  :ouch:  
 
ECK


 
De où ce qu'il sort ces CPU ?  :pt1cable:  
4200+, Turion 2800+ .... FX57 demain ?  :pt1cable:


Message édité par computersmsa le 06-03-2005 à 12:43:45
n°1214228
all2505
Posté le 06-03-2005 à 12:41:18  profilanswer
 

on voit pas si le coef est bloqué ou non :(

n°1214230
computersm​sa
Posté le 06-03-2005 à 12:43:57  profilanswer
 

On s'enfou royale du coef hein ;)


Message édité par computersmsa le 06-03-2005 à 12:44:03
n°1214234
podadan
Eleveur de PC en liberté
Posté le 06-03-2005 à 12:47:54  profilanswer
 

AMD_Eclectik a écrit :

Si tu parles de 35 pass du test #5, sache que ce n'est pas suffisant, et que, arrivé dans ton OS tu peux éssuyer une instabilité.


 
Oui je parlais de ca, mais si celui là te plais pas y en a d'autres dans les liens que j'ai mis.
Et entre nous, je suis d'accord que 35pass de test5 ca prouve pas que c'est stable a 100%. Mais le mec si il s'ammuse a faire 35p en test5 c'est que c'est là que ca plante.
 

facedeharicot a écrit :

pas avec un coeff entier  [:aloy]


 
Et alors ca change quoi ? La ram est en desynch...

n°1214238
asmomo
Posté le 06-03-2005 à 12:55:47  profilanswer
 

Vous auriez un comparo de perfs 1T/2T sous le coude ?

n°1214241
damsxx
Posté le 06-03-2005 à 12:58:25  profilanswer
 

bon je demande votre aide  
j'arrive pas a faire mieux que ca a cette frq  
une idee pour amélioree le tps a SuperPI ? un pti 29s koi :D
http://membres.lycos.fr/damsxx2/BP250-cas1.5.JPG

n°1214242
podadan
Eleveur de PC en liberté
Posté le 06-03-2005 à 13:00:41  profilanswer
 

asmomo a écrit :

Vous auriez un comparo de perfs 1T/2T sous le coude ?


 
+1

n°1214243
computersm​sa
Posté le 06-03-2005 à 13:00:52  profilanswer
 

podadan a écrit :

J'ai vraiment l'impression parler dans une cour d’école  :(  je perd mon temps  ou quoi :pfff:  
Regarde les screens avec 35pass de memtest et vois que tu as tord...


T'es un fénomène de foire  :heink:  
2T ... 1566 Mo/s ... tu te fou de qui ?
Même de la noname PC2100 de base non ocer en 1T fait mieux ;)

n°1214245
skirms_fr
quand on est con c pour la vie
Posté le 06-03-2005 à 13:04:21  profilanswer
 

damsxx a écrit :

bon je demande votre aide  
j'arrive pas a faire mieux que ca a cette frq  
une idee pour amélioree le tps a SuperPI ? un pti 29s koi :D
http://membres.lycos.fr/damsxx2/BP250-cas1.5.JPG


 
read preambule et idle cycle time monte un peu
 
moi je met 6.5 et 64


---------------
My Cascade  N°1 / My Cascade  N°2
n°1214251
AMD_Eclect​ik
Posté le 06-03-2005 à 13:20:02  profilanswer
 

computersmsa a écrit :

T'es un fénomène de foire  :heink:  
2T ... 1566 Mo/s ... tu te fou de qui ?
Même de la noname PC2100 de base non ocer en 1T fait mieux ;)


 
+1
 

skirms_fr a écrit :

read preambule et idle cycle time monte un peu
 
moi je met 6.5 et 64


 
+1
 
Et essayes de passer ton TRFC @ 12, et ton TREF en 15.6us, je sais que ça augmente la bp, mais quid les perfs? :)
 
Testes et dis nous
 
 
ECK


---------------
http://www.oc-tuning.com
n°1214255
damsxx
Posté le 06-03-2005 à 13:24:47  profilanswer
 

skirms_fr a écrit :

read preambule et idle cycle time monte un peu
 
moi je met 6.5 et 64


 
 
t reglage me font perdre en perf  
superpi augmente son temps legerement ;)

n°1214256
skirms_fr
quand on est con c pour la vie
Posté le 06-03-2005 à 13:25:40  profilanswer
 

possible mais t es pt etre plus bloqué la ou tu l ete avant en frequence non ?


---------------
My Cascade  N°1 / My Cascade  N°2
n°1214259
podadan
Eleveur de PC en liberté
Posté le 06-03-2005 à 13:27:33  profilanswer
 

computersmsa a écrit :

T'es un fénomène de foire  :heink:  
2T ... 1566 Mo/s ... tu te fou de qui ?
Même de la noname PC2100 de base non ocer en 1T fait mieux ;)


 
Regarde les autres liens! Ouvre les yeux  :o  
Ya vraiment que des gens ici qui insulte tout le monde à tout bout de champ ici!
Tu as été élevé dans une porcherie ou quoi  :fou: La bienséance tu connais ?  
 
En tout cas félicitation là tu as écrit une ligne complète...

n°1214264
computersm​sa
Posté le 06-03-2005 à 13:30:30  profilanswer
 

C'est assez difficile de garder son calme avec des olibrius qui ne savent pas reconnaître leur tord et qui ne savent pas analyser une situation.
300 MHz 2-2-2-5 1T ça n'existe pas, basta  :hello:
 
Fou la paix à ton monde, et arrête de donner des leçons ;)
Edit : Quelle insulte ?  :heink: Susceptible ? :D
Il n'y a pas de méchanceté ... tu est simplement lourd et stop please  :o


Message édité par computersmsa le 06-03-2005 à 13:36:13
n°1214266
damsxx
Posté le 06-03-2005 à 13:33:16  profilanswer
 

AMD_Eclectik a écrit :

+1
 
 
 
+1
 
Et essayes de passer ton TRFC @ 12, et ton TREF en 15.6us, je sais que ça augmente la bp, mais quid les perfs? :)
 
Testes et dis nous
 
 
ECK


 
 
 
 :fou: trfc @ 12 = plantage direct
 
impossible de redemarer pdt 5 min g du faire pls CMOS  :fou:

n°1214269
computersm​sa
Posté le 06-03-2005 à 13:34:21  profilanswer
 

Damsxx -> Il te suffit de l'appuyer sur la touche Insert pdt le boot et ca bootera :)
Pas besoin de CMOS :D

n°1214270
Pt1t
hmm ...
Posté le 06-03-2005 à 13:34:27  profilanswer
 

computersmsa a écrit :


300 MHz 2-2-2-5 1T ça n'existe pas, basta


 
 
Sinon ca doit roxer à mort ca !  :pt1cable:  :pt1cable:


Message édité par Pt1t le 06-03-2005 à 13:35:43
n°1214272
damsxx
Posté le 06-03-2005 à 13:34:59  profilanswer
 

skirms_fr a écrit :

possible mais t es pt etre plus bloqué la ou tu l ete avant en frequence non ?


 
suis pas bloqué en freq  
je peux monter vers 260/265 avec mais 2750 c la limite stable de mon winnie ;)

n°1214273
skirms_fr
quand on est con c pour la vie
Posté le 06-03-2005 à 13:35:27  profilanswer
 

suffit de couper l alim et attendre 10 sec :D
 
et qd tu rappuis sur power fais le plusieurs fois ;) des fois ca part pas tout de suite


---------------
My Cascade  N°1 / My Cascade  N°2
mood
Publicité
Posté le   profilanswer
 

 Page :   1  2  3  4  5  ..  1127  1128  1129  ..  1408  1409  1410  1411  1412  1413

Aller à :
Ajouter une réponse
 

Sujets relatifs
[CPUMSR] Modif de coef. multiplicateur sous windaub !!! [AMD only]Overclocking avec une msi K7N2G-ILSR et un AMD Barton 2500+
Amd 2000+ (juihb ou autre.....) vos O/C!!!!AMD Athlon XP 2800+ Barton Aide svp merci !!
Meilleur ventilo pour processeur AMDCPU AMD Thorton
Comment savoir si son proc. AMD a les coeff de bloqués ?AMD XP 1700+ 0.18µ AGOIA bonne série ou pas ??
Comment stabiliser mon overclocking AMD inside ?[HFR Xtrem O/c Team] Ln2 Cooling + Amd Cpu / Need matos
Plus de sujets relatifs à : [AMD 64 Force]Thread des A64FX et des A64+ The 3D Performers


Copyright © 1997-2025 Groupe LDLC (Signaler un contenu illicite / Données personnelles)