Salut,
Voici donc mon fichier XF86Config-4
Je te le donne à titre indicatif, car celui-ci ne contient pas que la configuration de la carte graphique...Et les résolutions définies ici sont particulièrement basses...
Tu n'as qu'à voir les diff entre le tien et celui-ci, les modifs à faire pour avoir le DH n'étant pas énormes...
(A noter: Pas d'accélération 2d ou 3d possible (XV ou DRI) lorsque tu utilises le DH)
(Ce fichier est configuré pour le mode Clone Tv, mais il me semble que pour le multi-écran, il suffit d'enlever l'option Xinerama)
Le deuxième écran configuré ici est une Tv Pal... Mais tu peux le remplacer pas un moniteur...
XF86Config-4 (Avec Dual-Head, en clone TV)
------------------------------------
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
Screen 0 "Screen1" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db" ). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "v4l"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "pex5"
Load "dri"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
EndSection
Section "ServerFlags"
Option "Xinerama"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/lircm"
Option "DeviceName" "Remote"
Option "AlwaysCore"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.0-54.0
VertRefresh 50.0-110.0
Option "dpms"
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31,0 - 54,0
VertRefresh 50,0 - 110,0
EndSection
Section "Device"
# no known options
Identifier "MATROX CARD 1"
Driver "mga"
VendorName "Matrox Millennium G400"
BoardName "Matrox Millennium G400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
# no known options
Identifier "MATROX CARD 2"
Driver "mga"
VendorName "Matrox Millennium G400"
BoardName "Matrox Millennium G400"
Option "TV" "yes"
Option "CableType" "YC_COMPOSITE"
Option "TVStandard" "PAL"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "MATROX CARD 1"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "800x600"
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "MATROX CARD 2"
Monitor "Monitor1"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "800x600"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
-------------------------------------
