Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2351 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  Logiciels

  [de nouveau!!]probleme de lancement du jeu "racer"

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

[de nouveau!!]probleme de lancement du jeu "racer"

n°830251
pipolas
/mount/boulet
Posté le 26-07-2006 à 16:13:04  profilanswer
 

Bonjour et merci,
Adorant les jeux de voitures, j'ai éssayé d'installer le jeu racer pour linux (version béta).
seul probleme, au moment de lancer le jeux, j'ai droit a un message d'erreur...
une fenetre apparit avec un pointeur rouge puis elle disparait au bout de 2 seconde.
 
voici le message:

Citation :

pipolas@nicolas-desktop:~/racer$ sh racer
Error loading new keyboard description
QImage:Read(data/fonts/din14.tga)
QImage:Read(data/images/skidmark.tga)
QImage:Read(data/images/smoke.tga)
QImage:Read(data/images/smap_whitesun_add.tga)
QImage:Read(data/images/track_lt.tga)
X Error of failed request:  BadLength (poly request too large or internal Xlib length error)
  Major opcode of failed request:  148 (GLX)
  Minor opcode of failed request:  2 (X_GLXRenderLarge)
  Serial number of failed request:  167
  Current serial number in output stream:  169
pipolas@nicolas-desktop:~/racer$


merci beaucoup de votre aide
 
pipiolas[u][/u]


Message édité par pipolas le 27-07-2006 à 20:43:37
mood
Publicité
Posté le 26-07-2006 à 16:13:04  profilanswer
 

n°830262
francoispg​p
Posté le 26-07-2006 à 16:48:01  profilanswer
 

pb de carte pas 3D ou de driver 3D pas chargé on dirait....
 
bad length poly ..... ça ressemble à un dépassement de mémoire vidéo pour le calcul polygonne ça non ?


Message édité par francoispgp le 26-07-2006 à 16:49:01
n°830264
memaster
ki a volé mon 62?
Posté le 26-07-2006 à 16:53:26  profilanswer
 

d'après le site il faut être correctement positionner dans l'arborescence
aussi pour le lancer.
il faut se mettre un cran en dessous du /bin
et lancer ./bin/racer sans le sh devant car sinon tu lance l'interpreteur du shell
alors que /bin/racer est un binaire executable.
 
je ne sais pas si cela va resoudre ton pb.

n°830274
pipolas
/mount/boulet
Posté le 26-07-2006 à 17:36:01  profilanswer
 

toujours le meme probleme.
sinon j'ai une nvidia 6600gt 256 de ram avec les pilotes nvidia d'installé

n°830277
memaster
ki a volé mon 62?
Posté le 26-07-2006 à 17:45:23  profilanswer
 

j'ai une fx5200 et nvidia aussi
et ça tourne comme un charme :love:  
 
est ce que ton support opengl est actif?
#glxinfo
#glxgears doit tourner correctement.
 
as tu essayé le jeu de pingoin tuxracer? pour verifier

n°830279
pipolas
/mount/boulet
Posté le 26-07-2006 à 17:52:13  profilanswer
 

merci.
glxinfo

Citation :

pipolas@nicolas-desktop:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
    GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
    GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float
GLX version: 1.2
GLX extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_SGIX_fbconfig, GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 6600 GT/AGP/SSE2
OpenGL version string: 1.2 (2.0.2 NVIDIA 87.62)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
    GL_ARB_texture_border_clamp, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_window_pos, GL_ARB_texture_non_power_of_two, GL_ARB_vertex_program,
    GL_ARB_fragment_program, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_pixels, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
    GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
    GL_ATI_texture_mirror_once, GL_HP_occlusion_test,
    GL_IBM_texture_mirrored_repeat, GL_NV_blend_square,
    GL_NV_texgen_reflection, GL_NV_texture_rectangle,
    GL_NV_texture_env_combine4, GL_SGIS_generate_mipmap, GL_SGIS_texture_lod,
    GL_SGIX_depth_texture, GL_SGIX_shadow
 
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x2c 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2d 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2e 32 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 Ncon
0x2f 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
pipolas@nicolas-desktop:~$


glxgears marche a 450fps!!!
alors qu'avant il marchait a 3000fps...
je ne voit pas ce qui se passe.
 
édit:
j'ai fait un reboot et la, maintenant j'ai 2000fps

Message cité 1 fois
Message édité par pipolas le 26-07-2006 à 17:57:30
n°830281
memaster
ki a volé mon 62?
Posté le 26-07-2006 à 17:58:34  profilanswer
 

pipolas a écrit :

merci.
glxinfo

Citation :

pipolas@nicolas-desktop:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No




voila,
ton support opengl n'est pas actif et il est donc normal que glxgears tourne à "2km/h",
c'est le processeur seul qui fait les calculs.
 
il faut que tu ailles te documenter d'urgence sur xorg.conf (copie le nous ici)
pour activer les fonctions opengl de ta carte nvidia.
 
il doit y avoir dedans une ligne qui ressemble à :
load "dri"
et ton driver doit etre positionner à "nvidia" au lieu de "nv"
 
verifie dans ton bios aussi
ta vitesse d'AGP

n°830285
pipolas
/mount/boulet
Posté le 26-07-2006 à 18:03:15  profilanswer
 

tux racer marche du tonnerre

n°830287
pipolas
/mount/boulet
Posté le 26-07-2006 à 18:07:51  profilanswer
 

xorg.conf

Citation :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
 
Section "Files"
 FontPath "/usr/share/X11/fonts/misc"
 FontPath "/usr/share/X11/fonts/cyrillic"
 FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/share/X11/fonts/Type1"
 FontPath "/usr/share/X11/fonts/100dpi"
 FontPath "/usr/share/X11/fonts/75dpi"
 # path to defoma fonts
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
 
Section "Module"
 Load "bitmap"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "type1"
 Load "vbe"
EndSection
 
Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver  "kbd"
 Option  "CoreKeyboard"
 Option  "XkbRules" "xorg"
 Option  "XkbModel" "pc104"
 Option  "XkbLayout" "fr"
EndSection
 
Section "InputDevice"
 Identifier "Configured Mouse"
 Driver  "mouse"
 Option  "CorePointer"
 Option  "Device"  "/dev/input/mice"
 Option  "Protocol"  "ExplorerPS/2"
 Option  "ZAxisMapping"  "4 5"
EndSection
 
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to  
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection
 
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to  
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection
 
Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to  
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection
 
Section "Device"
 Identifier "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
 Driver  "nvidia"
 BusID  "PCI:1:0:0"
EndSection
 
Section "Monitor"
 Identifier "Acer 77e"
 Option  "DPMS"
 HorizSync 30-70
 VertRefresh 50-160
EndSection
 
Section "Screen"
 Identifier "Default Screen"
 Device  "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
 Monitor  "Acer 77e"
 DefaultDepth 24
 SubSection "Display"
  Depth  1
  Modes  "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  4
  Modes  "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  8
  Modes  "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  15
  Modes  "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  16
  Modes  "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  24
  Modes  "1024x768" "800x600" "640x480"
 EndSubSection
EndSection
 
Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
 InputDevice     "stylus" "SendCoreEvents"
 InputDevice     "cursor" "SendCoreEvents"
 InputDevice     "eraser" "SendCoreEvents"
EndSection
 
Section "DRI"
 Mode 0666
EndSection

n°830311
memaster
ki a volé mon 62?
Posté le 26-07-2006 à 19:57:30  profilanswer
 

voila le mien quand il etait en mono-screen

Citation :


Section "Device"
    Identifier "device1"
    BoardName "NVIDIA GeForce"
    Driver "nvidia"
    Option "DPMS"
    Option "AGPFastWrite" "true"
    Option "EnablePageFlip" "true"
    Option "MetaModes" "CRT-0: 1024x768"
EndSection

mood
Publicité
Posté le 26-07-2006 à 19:57:30  profilanswer
 

n°830312
memaster
ki a volé mon 62?
Posté le 26-07-2006 à 19:59:45  profilanswer
 

un autre extrait

Citation :


Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "/usr/X11R6/lib/modules/extensions/nvidia/libglx.so"
    Load "glx"
EndSection

n°830320
pipolas
/mount/boulet
Posté le 26-07-2006 à 20:15:52  profilanswer
 

j'ai éssayé de faire comme le tien, mais cela ne marche pas...
que faire

n°830335
pipolas
/mount/boulet
Posté le 26-07-2006 à 21:57:14  profilanswer
 

up

n°830390
memaster
ki a volé mon 62?
Posté le 27-07-2006 à 07:49:10  profilanswer
 

essaye de remettre le driver libre nv et voir si l'accel OGL se fait :
#glxinfo

n°830442
pipolas
/mount/boulet
Posté le 27-07-2006 à 10:40:34  profilanswer
 

ok, je vais regardfer

n°830455
pipolas
/mount/boulet
Posté le 27-07-2006 à 11:10:29  profilanswer
 

ok,  
j'ai encore redémarré, puis maintenant, glxinfo me retourne "direct rendering = yes"

n°830458
pipolas
/mount/boulet
Posté le 27-07-2006 à 11:11:59  profilanswer
 

c'est bon, il marche...
je ne sais pas ce qui s'était passé...
merci beaucoup de votre aide

n°830607
pipolas
/mount/boulet
Posté le 27-07-2006 à 20:44:02  profilanswer
 

de nouveau cabeug...
mais que faire??


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  Logiciels

  [de nouveau!!]probleme de lancement du jeu "racer"

 

Sujets relatifs
Probleme Squid sous FreebsdProbleme affichage VNC sous linux
[Apache-ssl] Problème de certificatsProbleme DD externe / EXT3
[résolu] Probleme avec mrtgprobleme droit sous samba
probleme montage repertoire linux sous poste travail XP[Résolu] Postfix+postfixadmin+mysql problème d'authentification
probleme déconnection dongle wifi (obliger de débrancher-rebrancher)Problème d'installation de xen 3.0.2 sur ubuntu 6.06 TLS dapper drake
Plus de sujets relatifs à : [de nouveau!!]probleme de lancement du jeu "racer"


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR