# Durée du bail en secondes
default-lease-time 6000;
max-lease-time 6000;
 
subnet 192.168.100.0 netmask 255.255.255.0
 
{
  authoritative;
 
  # Plage d'adresses à attribuer pour les machines non déclarées
  range 192.168.100.2 192.168.100.200;
 
  option routers 192.168.100.254;
  option subnet-mask 255.255.255.0;
  option domain-name-servers 192.168.100.254;
}
 
host ordimax
{
  # Adresse MAC de la machine
  hardware ethernet 00:0c:6e:b7:fd:0f;
  # Adresse IP à attribuer
  fixed-address 192.168.100.12;
}
 
subnet 82.67.146.0 netmask 255.255.255.0
{
 not authoritative;
}
 

If dhclient should listen and transmit on a port other than the standard (port 68), the -p flag may used. It should be followed by the udp port number that dhclient should use. This is mostly useful for debugging purposes. If the -p flag is specified, the client will transmit responses to servers at a port number that is one less than the one specified - i.e., if you specify -p 68, then the client will listen on port 68 and transmit to port 67. Datagrams that must go through relay agents are sent to the port number specified with the -p flag - if you wish to use alternate port numbers, you must configure any relay agents you are using to use the same alternate port numbers.