Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2865 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  Divers

  [Lcdproc] Problème de configuration avec un lcd crystalfontz

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

[Lcdproc] Problème de configuration avec un lcd crystalfontz

n°312608
FredProg
Posté le 24-08-2003 à 11:54:24  profilanswer
 

Je suis peut être un peu hors sujet je sais mais je cherche depuis 2 jours sans succés j'ai visité tout ce que google me propose  :pt1cable:  
 
Voici mon LCDd.conf :

Citation :

[server]
#Driver=none
#Driver=curses
Driver=HD44780
#Driver=lcdm001
#Driver=MtxOrb
#Driver=CFontz
 
[HD44780]
# Hitachi HD44780 driver
# See docs/hd44780_howto.txt
 
Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
 
ConnectionType=8bit
# Select what type of connection. See documentation for types.
 
Keypad=no
# If you have a keypad connected. Keypad layout is currently not
# configureable from the config file.
 
Backlight=no
# If you have a switchable backlight.
 
Size=20x2
# Specifies the size of the LCD.
# In case of multiple combined displays, this should be the total size.
 
#vspan=1,2
# For multiple displays: at what 'logical' lines do the individual displays
# start.
 
#extended=yes
# If you want to use more than 3 HD44780 controllers on the LPT, you need to
# specify this. See documentation.
 
#DelayMult=2
# If your display is slow and cannot keep up with the flow of data from
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
# to increase the delays. Default: 1.
 
DelayBus=true
# You can reduce the inserted delays by setting this to false.
# On fast PCs it is possible your LCD does not respond correctly.
# Default: true.
 
#Device=/dev/ttyS0
# For PIC-an-LCD connection type only: the serial device to which the LCD
# is connected. Default: /dev/lcd


 
et le cablage que j'ai pour mon lcd (c même le lcd) :
http://desigen.free.fr/Genesis/dou [...] dex_dr.htm
(fonctionne sous windows avec lcdcenter)
 
A priori il n'y a pas d'erreur de syntaxe dans le fichier de configuration puisque LCDd se lance sans problème.
Tout ce que le LCD affiche c des carrés plein sur une ligne, ou en mode 8bit une fois lancé une demi ligne supplémentaire est allumé...
Sinon si je lance lcdproc C M D X il y a réaction mais toujours des carrés qui clignote (très peu), j'ai pu apercevoir brievement du texte une fois mais ça ne la fait qu'une fois :p
 
Enfin bref y'a un pb :(


Message édité par FredProg le 24-08-2003 à 11:55:51
mood
Publicité
Posté le 24-08-2003 à 11:54:24  profilanswer
 


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  Divers

  [Lcdproc] Problème de configuration avec un lcd crystalfontz

 

Sujets relatifs
Sb-Live - MDK 9.1 - Configuration ??Problème boot linux
[Alsa] [Debian] Probleme d'installation de carte son[SuSE 8.1] Configuration combo DVD CD-R CD-RW
Probleme de sacadement sous linux..Problème avec Webcam Logitech Quickcam USB
Problème de droit sur lecteurs CDProblème CM Gigabyte et mdk 9.1
j'ai un probleme de masqueringproblème lilo : volid read error
Plus de sujets relatifs à : [Lcdproc] Problème de configuration avec un lcd crystalfontz


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR