azoubade a écrit :
Je suis scrupuleusement la méthode (toute simple) et ça coince avant la fin.
|
Quelle méthode utilises-tu et à quel point est ce que "ça coince"?
Voici 3 méthodes, différentes:
Reset Procedures for Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.
Try this method to reset printer Canon
* Canon i450, i455, i470D, i475D, i550, i560, i6100, i6500, i850, i860, i865, i900D, i905D, i950, i960, i965, i9100, i9950
* Canon S300, S330, S500, S520, S530D, S600, S630, S750, S820, S830D, S900, S6300, S9000
* Canon PIXMA iP2000, iP3000, iP3300, iP4000, iP4200, iP4300, iP4500, iP5000, iP5200, iP5300, iP6000, iP6210, iP6220, iP6600, iP6700, iP8500, pro9000, pro9500, iX4000, iX5000
* Canon BJ F500, F700, F890, F900
1. Turn off the printer ( "Power" button).
2. Hold the button "Resume", include printer (click "Power" ).
3. Hold the "Power" button, release the button "Resume" (power indicator / preparedness must turns green)
4. Not releasing the "Power" button, double click "Resume" and release both buttons
-- each time you click "Resume" power indicator / willingness to change color (one-click - yellow, the second hitting - green). U printers with more than one indicator - indication switches (power indicator / preparedness - green indicator error - yellow)
-- after the buttons are released, power indicator / preparedness will be for some time to blink green (Stamford time depends on the printer model), and then the green light permanently
-- If after these actions instead of constantly burning green printer continues to display error, or you are mistaken in paragraphs 1-4 (turn off the printer and repeat with paragraph 1), or if additional printer error that must be corrected, or it will not go down to a service mode.
5. Four times click "Resume" (each time you click "Resume" power indicator / willingness to change color, and the printers with more than one indicator - indication switches: the willingness / error).
6. Once you click "Power" to confirm the selected action (reset counter absorber). To disable the printer "Power" button to click again.
For some printers (for example, iP2000) to switch off clicking "Power" again, that is three in a row.
The same procedures works for i560/s400/i9100/i9950/s300/i850/ and Pixima From Ip3000 above
Canon i550, i560, i850, i950, i960 (May work with i860, i865)
1. Start with the printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done moving print head.
6. Select functions below with RESUME press POWER to execute:
Number of presses - light color - function :
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter
Message édité par jojo540 le 30-05-2009 à 19:39:19