TIME OUT avec un PLEXTOR 12/10/32A :-/

Recherche :

Mot : Pseudo : Filtrer
Bas de page
Auteur	Sujet : TIME OUT avec un PLEXTOR 12/10/32A :-/

fazouye

Salut,
j'ai de gros pb de gravure avec mon graveur PLEXWRITER 12/10/32A

Je suis sous 98, j'utilise NERO 5.5.7.2 et une fois sur deux ma gravure se stope aléatoirement pof, comme ca... Le graveur plante et ne répond plus, mais le système est stable... je dois rebooter si je veux de nouveau avoir accès au graveur.

Ca commence à me couter cher en CD vierges cette affaire :(

Avez-vous déjà eu ce genre de pb ? hardware? software (j'espère..) ?

thx pour vos conseils...
Father

Je joins ci-dessous le log de ma dernière gravure foirée (hd vers graveur) :

Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 14/03/98 15:47:30
Nero Version: 5.5.7.2
Recorder: <PLEXTOR CD-R PX-W1210A> Version: 1.07 - HA 1 TA 0 - 5.5.7.2
Adapter driver: <ESDI_506> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <CREATIVE DVD5240E-1> Version: 1.30 - HA 0 TA 1 - 5.5.7.2
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI
CREATIVE DVD5240E-1 (Target 1, E:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
PLEXTOR CD-R PX-W1210A (Target 0, F:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261336kB)
Free physical memory: 3MB (3340kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
3.2.2002

18:26:46 #1 Phase 72 File dlgbrnst.cpp, Line 1436
BURN-Proof activated

18:26:46 #2 Text 0 File Reader.cpp, Line 117
Reader running

18:26:46 #3 Text 0 File Writer.cpp, Line 127
Writer PLEXTOR CD-R PX-W1210A running

18:26:46 #4 ISO9660GEN -11 File geniso.cpp, Line 4307
First writeable address = 0 (0x00000000)

18:26:46 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 361667 (361667) = #361667/80:22.17
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

18:26:58 #6 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 368999 (82:01.74)
Last address to be written: 361669 (80:24.19)
Last possible write address on media: 368999 (82:01.74)
Last address to be written: 361[#000000][/#000000][#00ff00]669 (80:24.19)

18:27:00 #7 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: PLEXTOR CD-R PX-W1210A;
CDR code: 00 97 28 26; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1C 1A (LI 97:28.26), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:27:00 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PLEXTOR CD-R PX-W1210A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 741001216

18:27:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 361667 (361667) = #361667/80:22.17
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 361667 blocks [PLEXTOR CD-R PX-W1210A]
--------------------------------------------------------------

18:27:00 #10 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started

18:27:00 #11 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed

18:27:00 #12 Phase 28 File dlgbrnst.cpp, Line 1436
Speed measurement started

18:27:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

18:27:47 #14 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

18:27:48 #15 Phase 29 File dlgbrnst.cpp, Line 1396
Speed measurement completed: 102.1x (15 315 KB/s)

18:27:48 #16 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 12x (1 800 KB/s)

18:27:48 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

18:27:48 #18 Text 0 File Mmc.cpp, Line 15217
Set BUFE: BURN-Proof -> ON

18:32:24 #19 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 180000ms, CDB Data[hex]: 2A 00 00 00 CB 32 00 00 1F 00 00 00

18:32:24 #20 CDR -1175 File Cdrdrv.cpp, Line 1325
Internal trace
Command timeout occured: timeout 180000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0xCB 0x32 0x00 0x00 0x1F 0x00 0x00 0x00

18:32:24 #21 SCSI -26 File Cdrdrv.cpp, Line 1356
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038F55E0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0xCB 0x32 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:32:24 #22 SCSI -26 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038F55E0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0xCB 0x32 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:32:24 #23 CDR -26 File Writer.cpp, Line 321
SCSI/ATAPI command timeout error

18:32:25 #24 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

18:32:25 #25 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

18:32:35 #26 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00

18:32:35 #27 SCSI -1000 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:32:35 #28 CDR -1175 File Cdrdrv.cpp, Line 1223
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00

18:32:35 #29 SCSI -26 File Cdrdrv.cpp, Line 1251
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:37:05 #30 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00

18:37:05 #31 SCSI -1000 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EE0800
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:37:05 #32 CDR -1175 File Cdrdrv.cpp, Line 1223
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00

18:37:05 #33 SCSI -26 File Cdrdrv.cpp, Line 1251
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EE0800
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:37:05 #34 CDR -1000 File WriterStatus.cpp, Line 155
SCSI/IDE error

18:37:05 #35 TRANSFER -24 File WriterStatus.cpp, Line 155
Could not perform end of Disc At Once

18:37:25 #36 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00

18:37:25 #37 SCSI -1000 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EE06E0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:37:25 #38 CDR -1175 File Cdrdrv.cpp, Line 1223
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00

18:37:25 #39 SCSI -26 File Cdrdrv.cpp, Line 1251
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EE06E0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:37:25 #40 CDR -1000 File WriterStatus.cpp, Line 160
SCSI/IDE error

18:37:25 #41 TRANSFER -39 File WriterStatus.cpp, Line 160
Could not perform EndSession

18:37:45 #42 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 12x (1 800 KB/s)

18:37:55 #43 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

18:38:15 #44 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00

18:38:15 #45 SCSI -1000 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:38:15 #46 CDR -1175 File Cdrdrv.cpp, Line 1223
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00

18:38:15 #47 SCSI -26 File Cdrdrv.cpp, Line 1251
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:38:25 #48 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 1E 00 00 00 00 00 00 00 00 00 00 00

18:38:25 #49 SCSI -1000 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

18:38:25 #50 CDR -1175 File Cdrdrv.cpp, Line 1223
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 1E 00 00 00 00 00 00 00 00 00 00 00

18:38:25 #51 SCSI -26 File Cdrdrv.cpp, Line 1251
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 15/05/98 20:01:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 03/02/02 18:11:10
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 03/03/01 04:55:54
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 03/03/01 04:55:54
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03/03/01 04:55:54
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 15/05/98 20:01:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 15/05/98 20:01:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.1998, size=69462 bytes, created 15/05/98 20:01:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.1998, size=18805 bytes, created 15/05/98 20:01:00

Publicité

franckymania

a tout hasard, renomme le fichier scsi1hlp.vxd en scsi1hlp.vx_

fazouye

pkoi pas...

pkoi penses tu que ca vient de là ?

[edtdd]--Message édité par Fazouye--[/edtdd]

fazouye

upgrade du firmware 1.07 -> 1.09
+ scsi1hlp.vx_
= ca va mieux

le pkoi du comment : j'en sais rien....

en tous cas, merci de ton aide ;)

franckymania

Fazouye a écrit a écrit :

upgrade du firmware 1.07 -> 1.09
+ scsi1hlp.vx_
= ca va mieux

le pkoi du comment : j'en sais rien....

en tous cas, merci de ton aide

C'est bien connu que ce fichier fout la merde sous Win9X avec les graveurs

Pourvu que ca dure

[edtdd]--Message édité par franckymania--[/edtdd]

FORUM HardWare.fr

Hardware

TIME OUT avec un PLEXTOR 12/10/32A :-/

Sujets relatifs
PLEXTOR & CRWIN !!!	Pb Plextor 16/10/40 (buffer)
firmware PLEXTOR	Nero et l'overbuning avec un plextor :! conseils :)
plextor 24/10/40 ou le 40/12/40	SUMA PLATINUM GeForce2 Ti 64 Mo 4ns TV-OUT
Plextools! v1.11 et Plextor 16/10/40A v1.04 ne font pas bon ménages...	plextor 40x capricieux... Nettoyer la lentille ?
Plextor et Nero	[AVIS] SUMA PLATINUM GeForce2 Ti 64 Mo 4ns TV-OUT ?
Plus de sujets relatifs à : TIME OUT avec un PLEXTOR 12/10/32A :-/

Page générée en 0.042 secondes