Je viens d'installer une debian sarge en serveur :
P3 1GHZ - 512Mo RAM - 3 * 200Go (haparm -tT /dev/diskx = 56Mo/s) - carte gigabit (donc debit > 50Mo/s)
Mon soucis se situe au niveau du transfert d'un mac mini (en gigabit lui aussi , relié par un switch gigabit) vers ce serveur.
Le logiciels de backup (Personal backup 4x à 72 )semble ne plus transférer pendant 2 voir 4 minutes puis reprends , cela se produit surtout sur les très gros fichiers vidéos > 1Go.
Je sauvegarde mon disque externe de 50 go ( relié au mac mini) vers une home directory du serveur Debian , dois-je toucher à des paramètres smb.conf pour avoir une écriture direct .. ou autre.
(comme modif. j'ai juste rajouter les TCPNODELAY SNDBUF)
je suis assez embêter car de mac à WindAUb je ne vois pas ce soucis ...
un peu d'aide serait apprécié.
Mon smb.conf :
Code :
- #
- # Sample configuration file for the Samba suite for Debian GNU/Linux.
- #
- #
- # This is the main Samba configuration file. You should read the
- # smb.conf(5) manual page in order to understand the options listed
- # here. Samba has a huge number of configurable options most of which
- # are not shown in this example
- #
- # Any line which starts with a ; (semi-colon) or a # (hash)
- # is a comment and is ignored. In this example we will use a #
- # for commentary and a ; for parts of the config file that you
- # may wish to enable
- #
- # NOTE: Whenever you modify this file you should run the command
- # "testparm" to check that you have not many any basic syntactic
- # errors.
- #
- #======================= Global Settings =======================
- [global]
- ## Browsing/Identification ###
- # Change this to the workgroup/NT-domain name your Samba server will part of
- workgroup = WORKGROUP
- # server string is the equivalent of the NT Description field
- server string = %h NAS (Samba %v)
- # Windows Internet Name Serving Support Section:
- # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
- ; wins support = no
- # WINS Server - Tells the NMBD components of Samba to be a WINS Client
- # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
- ; wins server = w.x.y.z
- # This will prevent nmbd to search for NetBIOS names through DNS.
- dns proxy = no
- # What naming service and in what order should we use to resolve host names
- # to IP addresses
- ; name resolve order = lmhosts host wins bcast
- #### Debugging/Accounting ####
- # This tells Samba to use a separate log file for each machine
- # that connects
- log file = /var/log/samba/log.%m
- # Put a capping on the size of the log files (in Kb).
- max log size = 1000
- # If you want Samba to only log through syslog then set the following
- # parameter to 'yes'.
- ; syslog only = no
- # We want Samba to log a minimum amount of information to syslog. Everything
- # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
- # through syslog you should set the following parameter to something higher.
- syslog = 0
- # Do something sensible when Samba crashes: mail the admin a backtrace
- panic action = /usr/share/samba/panic-action %d
- ####### Authentication #######
- # "security = user" is always a good idea. This will require a Unix account
- # in this server for every user accessing the server. See
- # /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
- # package for details.
- security = user
- # You may wish to use password encryption. See the section on
- # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
- encrypt passwords = true
- # If you are using encrypted passwords, Samba will need to know what
- # password database type you are using.
- passdb backend = tdbsam guest
- obey pam restrictions = yes
- ; guest account = nobody
- invalid users = root
- # This boolean parameter controls whether Samba attempts to sync the Unix
- # password with the SMB password when the encrypted SMB password in the
- # passdb is changed.
- ; unix password sync = no
- # For Unix password sync to work on a Debian GNU/Linux system, the following
- # parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
- # sending the correct chat script for the passwd program in Debian Potato).
- passwd program = /usr/bin/passwd %u
- passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .
- # This boolean controls whether PAM will be used for password changes
- # when requested by an SMB client instead of the program listed in
- # 'passwd program'. The default is 'no'.
- ; pam password change = no
- ########## Printing ##########
- # If you want to automatically load your printer list rather
- # than setting them up individually then you'll need this
- ; load printers = yes
- # lpr(ng) printing. You may wish to override the location of the
- # printcap file
- ; printing = bsd
- ; printcap name = /etc/printcap
- # CUPS printing. See also the cupsaddsmb(8) manpage in the
- # cupsys-client package.
- ; printing = cups
- ; printcap name = cups
- # When using [print$], root is implicitly a 'printer admin', but you can
- # also give this right to other users to add drivers and set printer
- # properties
- ; printer admin = @ntadmin
- ######## File sharing ########
- # Name mangling options
- ; preserve case = yes
- ; short preserve case = yes
- ############ Misc ############
- # Using the following line enables you to customise your configuration
- # on a per machine basis. The %m gets replaced with the netbios name
- # of the machine that is connecting
- ; include = /home/samba/etc/smb.conf.%m
- # Most people will find that this option gives better performance.
- # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
- # for details
- # You may want to add the following on a Linux system:
- # SO_RCVBUF=8192 SO_SNDBUF=8192
- socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
- # The following parameter is useful only if you have the linpopup package
- # installed. The samba maintainer and the linpopup maintainer are
- # working to ease installation and configuration of linpopup and samba.
- ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
- # Domain Master specifies Samba to be the Domain Master Browser. If this
- # machine will be configured as a BDC (a secondary logon server), you
- # must set this to 'no'; otherwise, the default behavior is recommended.
- ; domain master = auto
- # Some defaults for winbind (make sure you're not using the ranges
- # for something else.)
- ; idmap uid = 10000-20000
- ; idmap gid = 10000-20000
- ; template shell = /bin/bash
- #======================= Share Definitions =======================
- [homes]
- comment = Rerpertoire personnel
- browseable = yes
- # By default, the home directories are exported read-only. Change next
- # parameter to 'yes' if you want to be able to write to them.
- writable = yes
- # File creation mask is set to 0700 for security reasons. If you want to
- # create files with group=rw permissions, set next parameter to 0775.
- create mask = 0700
- # Directory creation mask is set to 0700 for security reasons. If you want to
- # create dirs. with group=rw permissions, set next parameter to 0775.
- directory mask = 0700
- # Un-comment the following and create the netlogon directory for Domain Logons
- # (you need to configure Samba to act as a domain controller too.)
- ;[netlogon]
- ; comment = Network Logon Service
- ; path = /home/samba/netlogon
- ; guest ok = yes
- ; writable = no
- ; share modes = no
- [printers]
- comment = All Printers
- browseable = no
- path = /tmp
- printable = yes
- public = no
- writable = no
- create mode = 0700
- # Windows clients look for this share name as a source of downloadable
- # printer drivers
- [print$]
- comment = Printer Drivers
- path = /var/lib/samba/printers
- browseable = yes
- read only = yes
- guest ok = no
- # Uncomment to allow remote administration of Windows print drivers.
- # Replace 'ntadmin' with the name of the group your admin users are
- # members of.
- ; write list = root, @ntadmin
- # A sample share for sharing your CD-ROM with others.
- ;[cdrom]
- ; comment = Samba server's CD-ROM
- ; writable = no
- ; locking = no
- ; path = /cdrom
- ; public = yes
- # The next two parameters show how to auto-mount a CD-ROM when the
- # cdrom share is accesed. For this to work /etc/fstab must contain
- # an entry like this:
- #
- # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
- #
- # The CD-ROM gets unmounted automatically after the connection to the
- #
- # If you don't want to use auto-mounting/unmounting make sure the CD
- # is mounted on /cdrom
- #
- ; preexec = /bin/mount /cdrom
- ; postexec = /bin/umount /cdrom
|
Message édité par colouryourmind le 06-01-2007 à 11:56:26
as bon (j'ai du brancher sur le mauvis switch ..pouahh).