Please I have a problem of inter-vlan routing, I have a core and two switches in each room floor.  
I created a vlan 11 and I give him an IP address and i enabled the ip routing in the core and in the switches in each room floor and I can not have the router with another VLAN and most all other vlan are not router, please how do ???  
Below config core and a switch to floor,
Please, I'am blocked, plz i need help  
I can not have access to the other sub networks  with the ip 11.11.1.25  
========================================
show running-config
Running configuration:
; J4819A Configuration Editor; Created on release #E.11.38
hostname "HP ProCurve Switch 5308xl"  
snmp-server contact "test"  
mirror-port D11  
module 6 type J4907A  
module 5 type J4907A  
module 4 type J4907A  
module 1 type J4878B  
module 2 type J4878B  
module 3 type J4878B  
ip routing  
snmp-server community "public" Unrestricted  
vlan 1  
name "DEFAULT_VLAN"  
untagged A1-A4,B1-B4,C1-C4,D15-D16,E1-E16,F3-F4,F6-F9,F11-F16  
ip address 172.16.X.1 255.255.0.0  
ip address 10.10.X.250 255.255.255.0  
no untagged D1-D14,F1-F2,F5,F10  
exit  
vlan 2  
name "WIFI"  
untagged F1-F2,F5,F10  
tagged A4,B4  
exit  
vlan 100  
name "DMZ"  
untagged D6-D7,D13-D14  
ip address 192.168.X.254 255.255.255.0  
exit  
vlan 200  
name "INTERNET"  
untagged D1-D5,D8-D12  
ip address 192.168.X.254 255.255.255.0  
monitor  
exit  
vlan 3  
name "MANAGEMENT"  
ip address 172.17.X.1 255.255.0.0  
exit
 
 
Vlan 11
name "test"
11.11.1.254 255.255.255.0
exit
 
banner motd "This is a private system maintained by the Allied Widget Corporatio
n.
Unauthorized use of this system can result in civil and criminal penalities !"
spanning-tree
spanning-tree priority 2
router rip
exit
vlan 1
ip rip
ip rip receive V1-only
ip rip send V1-only
exit
vlan 100
ip rip
ip rip receive V1-only
ip rip send V1-only
exit
 
 
 
============================================
floor switch:
 
 
ProCurve 2910al-48G-1E-2#  
ProCurve 2910al-48G-1E-2#  
ProCurve 2910al-48G-1E-2#  
ProCurve 2910al-48G-1E-2# sh running-config
Running configuration:
; J9147A Configuration Editor; Created on release #W.14.70
hostname "ProCurve 2910al-48G-1E-2"  
module 1 type J9147A  
ip routing  
vlan 1  
name "DEFAULT_VLAN"  
untagged 1-48  
ip address 172.16.X.5 255.255.0.0  
exit  
gvrp  
banner motd "This is a private system maintained by the Allied Widget Corporation.\nUnauthorized use of this system can result in ci
vil and criminal penalities !"
snmp-server community "public" unrestricted
spanning-tree force-version rstp-operation
password manager
password operator
ProCurve 2910al-48G-1E-2
 
 
plz help me