Getting Started
Hardware
- You are going to need a 32MB or larger MinSD card and MiniSD to SD adaptor if you already have a SD card slot on your machine. I got mine from eCOST.com and it came with a MiniSD to SD adaptor.
Software
- Modified version of Tera Team Pro which can connect to the WinCE USB development port.
- ItsUtils
Backup Instructions
1. Turn off the phone and unplug the USB cable from the phone.
2. Press the Camera power button and plug in the USB cable.
3. The phone will automatically start and you should see the 3 colors screen with USB text on the bottom of the phone screen. If this is your first time connecting the phone to your computer via engineering mode, Windows will take some time to install the USB driver. So please be patient.
4. Launch Tera Team Pro (ttermpro.exe) and select USB under the Serial menu. If connection is made successfully, you should see a terminal window with a blinking cursor.
5. You can initial the backup sequence in several steps with the following commands, but I encourage you to use r2sd all as some users were having problems with other commands. Please note that it will wipe out your MiniSD card and one card can only store one backup at any given time.
QUOTE
r2sd ipl
save the phase 1 bootloader
r2sd spl
Save phase 2 bootloader
r2sd gsm
Save GSM radio code
r2sd os
Save Windows CE operating system
r2sd splash
Save boot splash screen
r2sd all
Save everything
6. After backup operation is finished, you will see a blinking cursor again. You can now safely turn off the phone by pressing the power button or you can type ResetDevice in the terminal window to reboot.
7. I have different ways to copy the ROM to the computer. So if you want to know the original method, please check the original article.
8. To save the backup file, you will need to know the ROM size listed below. All in byte(s).
CODE
All: 31328768
9. Take out the MiniSD card from the phone and connect it to your computer via the adaptor or x-in-1 media reader.
10. If you havent done so already, download the ItsUtils suite and unzip it to a folder.
11. Open a Command Prompt window.
12. Navigator to the unzip folder and enter build folder in the command prompt window.
13. Enter psdread X: 0 YYYY filename.bin in the command prompt window. Replace X with the drive letter to the MiniSD card, YYYY with the byte number listed above, and filename.bin with a desired file name. For example, psdread E: 0 31328768 ipl.bin will backup everything to a local file named ipl.bin.
