Configuration :
- i7 920 3.67Ghz D0
- GIGABYTE GA-X58A-UD3R
- G.SKILL PI Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL7T-6GBPI
- Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
- Noctua NH-D14
J'ai regarder sur plusieur forum pour m'aider a O.C mon processeur et j'ai utiliser c config pour monter a 4Ghz :
http://forums.tweaktown.com/f69/pl [...] d3r-38298/
J'ai fait quelque motif voila:
Code :
- Advanced CPU Features:
- CPU Clock Ratio ................................ [20x]
- Intel(R) Turbo Boost Tech .................. [Disabled]
- CPU Cores Enabled ............................ [All]
- CPU Multi Threading .......................... [Enabled]
- CPU Enhanced Halt (C1E) ................... [Enabled]
- C3/C6/C7 State Support .................... [Disabled]
- CPU Thermal Monitor ......................... [Enabled]
- CPU EIST Function ............................ [Disabled]
- Virtualization Technology ................... [Disabled]
- Bi-Directional PROCHOT ..................... [Enabled]
- Uncore & QPI Features:
- QPI Link Speed .............................. x36
- Uncore Frequency .......................... (18, mem multi 2x+2)
- Isonchronous Frequency ..................[Enabled]
- Standard Clock Control:
- Base Clock (BCLK) Control ................ [Enabled]
- BCLK Frequency (MHz) ..................... 200
- PCI Express Frequency (MHz) ........... [100]
- C.I.A.2 [Disabled]
- Advanced Clock Control:
- CPU Clock Drive ..............................
- [700mV]
- PCI Express Clock Drive ................... [700mV]
- CPU Clock Skew ............................. [0ps]
- IOH Clock Skew ............................. [0ps]
- Advanced DRAM Features:
- Performance Enhance ...................... [Standard]
- Extreme Memory Profile (X.M.P) ......... [Profile1]
- System Memory Multiplier (SPD) ........ [8.0]
- DRAM Timing Selectable (SPD) .......... [Expert]
- Channel A + B + C
- Channel A Timing Settings:
- ##Channel A Standard Timing Control##
- CAS Latency Time ......................7
- tRCD .......................................8
- tRP .........................................7
- tRAS .......................................24
- Command Rate (CMD) ................2
- Advanced Voltage Control:
- CPU
- Load Line Calibration ................. [Lvl 1]
- CPU Vcore ............................... 1.31875v
- QPI/VTT Voltage 1.150v ............ 1.335
- CPU PLL 1.800v ....................... 1.88
- MCH/ICH
- PCIE 1.500v ........................... 1.54
- QPI PLL 1.100v ....................... 1.28
- IOH Core 1.100v ..................... 1.32
- ICH I/O 1.500v ....................... 1.60
- ICH Core 1.1v ........................ 1.22
- DRAM
- DRAM Voltage 1.500v .............. 1.64
- DRAM Termination 0.750v [AUTO]
- Ch-A Data VRef. 0.750v [AUTO]
- Ch-B Data VRef. 0.750v [AUTO]
- Ch-C Data VRef. 0.750v [AUTO]
- Ch-A Address VRef. 0.750v [AUTO]
- Ch-B Address VRef. 0.750v [AUTO]
- Ch-C Address VRef. 0.750v [AUTO]
|
Après un test sur OCCT je suis monté a 76c après seulement 6minutes sur 15 sur le premier cœur et mon pc a redémarrer seul.
Quelqu'un peu m'aider a mieux configurer mon bios pour avoir une température plus bas que 76c a 100% charge et rester a 4Ghz
Merci
Message édité par max3f le 13-03-2010 à 19:02:19
