Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
1632 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  réseaux et sécurité

  [ Postfix ] Routage de mail

 
 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

[ Postfix ] Routage de mail

n°813320
madsurfer
Boulet's eradicator
Posté le 26-05-2006 à 11:57:10  profilanswer
 

:hello:  
 
2- Lorsque j'envoies des mails depuis la machine postfix, l'emetteur est de type root@mamachine.mondomaine.
Je souhaiterais qu'il soit du type root@monentreprise.com
 
J'ai essayé de mettre dans mon fichier main.cf
 

Code :
  1. masquerade_domains = $mydomain
  2. virtual_maps=hash:/etc/postfix/virtual
  3. canonical_maps=hash:/etc/postfix/canonical
  5. transport_maps=hash:/etc/postfix/transport
  6. virtual_alias_maps = hash:/etc/postfix/virtual


 
J'ai également fais un postmap transport et virtual et redemarrer mon service postfix
 
Malheureusement mes mails générés depuis le serveur postfix arrive avec l'adresse root@mamachine.mondomaine.
 
 
Une idée ? :jap:  
 
 
 
 
[RESOLU ]
 
1-Je suis en train de configurer un serveur Postfix sur mon LAN. Celui-ci relaie les emails sur la passerelle antivirus situé sur la DMZ de mon FireWall.
J'aimerais envoyé les mails locaux qui sont en @monentreprise directement à un autre serveur de mail local et ceci sans passé par l'antivirus de la DMZ.
Les mails à destination du WEB continueront à passé par le relaie comme c'est déjà configuré.
 
Mais comment dire à Postfix de passer par notre serveur de messagerie et pas par l'antivirus pour les mails "locaux", c'est la question que je vous pose !  :D  
 
Je souhaite router les mails @monentreprise.com vers un serveur de messagerie en interne et les autres (Internet) vers l'antivirus sur la DMZ.
 
Vla mon main.cf
 

Code :
  1. # Global Postfix configuration file. This file lists only a subset
  2. # of all 300+ parameters. See the postconf(5) manual page for a
  3. # complete list.
  4. #
  5. # The general format of each line is: parameter = value. Lines
  6. # that begin with whitespace continue the previous line. A value can
  7. # contain references to other $names or ${name}s.
  8. #
  9. # NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
  10. # POSTFIX STILL WORKS AFTER EVERY CHANGE.
  12. # SOFT BOUNCE
  13. #
  14. # The soft_bounce parameter provides a limited safety net for
  15. # testing.  When soft_bounce is enabled, mail will remain queued that
  16. # would otherwise bounce. This parameter disables locally-generated
  17. # bounces, and prevents the SMTP server from rejecting mail permanently
  18. # (by changing 5xx replies into 4xx replies). However, soft_bounce
  19. # is no cure for address rewriting mistakes or mail routing mistakes.
  20. #
  21. #soft_bounce = no
  23. # LOCAL PATHNAME INFORMATION
  24. #
  25. # The queue_directory specifies the location of the Postfix queue.
  26. # This is also the root directory of Postfix daemons that run chrooted.
  27. # See the files in examples/chroot-setup for setting up Postfix chroot
  28. # environments on different UNIX systems.
  29. #
  30. queue_directory = /var/spool/postfix
  32. # The command_directory parameter specifies the location of all
  33. # postXXX commands.
  34. #
  35. command_directory = /usr/sbin
  37. # The daemon_directory parameter specifies the location of all Postfix
  38. # daemon programs (i.e. programs listed in the master.cf file). This
  39. # directory must be owned by root.
  40. #
  41. daemon_directory = /usr/libexec/postfix
  43. # QUEUE AND PROCESS OWNERSHIP
  44. #
  45. # The mail_owner parameter specifies the owner of the Postfix queue
  46. # and of most Postfix daemon processes.  Specify the name of a user
  47. # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
  48. # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
  49. # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
  50. # USER.
  51. #
  52. mail_owner = postfix
  54. # The default_privs parameter specifies the default rights used by
  55. # the local delivery agent for delivery to external file or command.
  56. # These rights are used in the absence of a recipient user context.
  57. # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
  58. #
  59. #default_privs = nobody
  61. # INTERNET HOST AND DOMAIN NAMES
  62. #
  63. # The myhostname parameter specifies the internet hostname of this
  64. # mail system. The default is to use the fully-qualified domain name
  65. # from gethostname(). $myhostname is used as a default value for many
  66. # other configuration parameters.
  67. #
  68. #myhostname = host.domain.tld
  69. #myhostname = virtual.domain.tld
  71. myhostname = turlututu.monentreprise.com
  74. # The mydomain parameter specifies the local internet domain name.
  75. # The default is to use $myhostname minus the first component.
  76. # $mydomain is used as a default value for many other configuration
  77. # parameters.
  78. #
  79. #mydomain = domain.tld
  81. mydomain = monentreprise.com
  83. # SENDING MAIL
  84. #
  85. # The myorigin parameter specifies the domain that locally-posted
  86. # mail appears to come from. The default is to append $myhostname,
  87. # which is fine for small sites.  If you run a domain with multiple
  88. # machines, you should (1) change this to $mydomain and (2) set up
  89. # a domain-wide alias database that aliases each user to
  90. # user@that.users.mailhost.
  91. #
  92. # For the sake of consistency between sender and recipient addresses,
  93. # myorigin also specifies the default domain name that is appended
  94. # to recipient addresses that have no @domain part.
  95. #
  96. #myorigin = $myhostname
  97. #myorigin = $mydomain
  99. myorigin = $mydomain
  103. # RECEIVING MAIL
  105. # The inet_interfaces parameter specifies the network interface
  106. # addresses that this mail system receives mail on.  By default,
  107. # the software claims all active interfaces on the machine. The
  108. # parameter also controls delivery of mail to user@[ip.address].
  109. #
  110. # See also the proxy_interfaces parameter, for network addresses that
  111. # are forwarded to us via a proxy or network address translator.
  112. #
  113. # Note: you need to stop/start Postfix when this parameter changes.
  114. #
  115. #inet_interfaces = all
  116. #inet_interfaces = $myhostname
  117. #inet_interfaces = $myhostname, localhost
  118. #inet_interfaces = localhost
  120. inet_interfaces = all
  122. # The proxy_interfaces parameter specifies the network interface
  123. # addresses that this mail system receives mail on by way of a
  124. # proxy or network address translation unit. This setting extends
  125. # the address list specified with the inet_interfaces parameter.
  126. #
  127. # You must specify your proxy/NAT addresses when your system is a
  128. # backup MX host for other domains, otherwise mail delivery loops
  129. # will happen when the primary MX host is down.
  130. #
  131. #proxy_interfaces =
  132. #proxy_interfaces = 1.2.3.4
  134. # The mydestination parameter specifies the list of domains that this
  135. # machine considers itself the final destination for.
  136. #
  137. # These domains are routed to the delivery agent specified with the
  138. # local_transport parameter setting. By default, that is the UNIX
  139. # compatible delivery agent that lookups all recipients in /etc/passwd
  140. # and /etc/aliases or their equivalent.
  141. #
  142. # The default is $myhostname + localhost.$mydomain.  On a mail domain
  143. # gateway, you should also include $mydomain.
  144. #
  145. # Do not specify the names of virtual domains - those domains are
  146. # specified elsewhere (see VIRTUAL_README).
  147. #
  148. # Do not specify the names of domains that this machine is backup MX
  149. # host for. Specify those names via the relay_domains settings for
  150. # the SMTP server, or use permit_mx_backup if you are lazy (see
  151. # STANDARD_CONFIGURATION_README).
  152. #
  153. # The local machine is always the final destination for mail addressed
  154. # to user@[the.net.work.address] of an interface that the mail system
  155. # receives mail on (see the inet_interfaces parameter).
  156. #
  157. # Specify a list of host or domain names, /file/name or type:table
  158. # patterns, separated by commas and/or whitespace. A /file/name
  159. # pattern is replaced by its contents; a type:table is matched when
  160. # a name matches a lookup key (the right-hand side is ignored).
  161. # Continue long lines by starting the next line with whitespace.
  162. #
  163. # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
  164. #
  165. mydestination = $myhostname, localhost.$mydomain, localhost
  166. #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
  167. #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
  168. #       mail.$mydomain, www.$mydomain, ftp.$mydomain
  170. # REJECTING MAIL FOR UNKNOWN LOCAL USERS
  171. #
  172. # The local_recipient_maps parameter specifies optional lookup tables
  173. # with all names or addresses of users that are local with respect
  174. # to $mydestination, $inet_interfaces or $proxy_interfaces.
  175. #
  176. # If this parameter is defined, then the SMTP server will reject
  177. # mail for unknown local users. This parameter is defined by default.
  178. #
  179. # To turn off local recipient checking in the SMTP server, specify
  180. # local_recipient_maps = (i.e. empty).
  181. #
  182. # The default setting assumes that you use the default Postfix local
  183. # delivery agent for local delivery. You need to update the
  184. # local_recipient_maps setting if:
  185. #
  186. # - You define $mydestination domain recipients in files other than
  187. #   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
  188. #   For example, you define $mydestination domain recipients in   
  189. #   the $virtual_mailbox_maps files.
  190. #
  191. # - You redefine the local delivery agent in master.cf.
  192. #
  193. # - You redefine the "local_transport" setting in main.cf.
  194. #
  195. # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
  196. #   feature of the Postfix local delivery agent (see local(8)).
  197. #
  198. # Details are described in the LOCAL_RECIPIENT_README file.
  199. #
  200. # Beware: if the Postfix SMTP server runs chrooted, you probably have
  201. # to access the passwd file via the proxymap service, in order to
  202. # overcome chroot restrictions. The alternative, having a copy of
  203. # the system passwd file in the chroot jail is just not practical.
  204. #
  205. # The right-hand side of the lookup tables is conveniently ignored.
  206. # In the left-hand side, specify a bare username, an @domain.tld
  207. # wild-card, or specify a user@domain.tld address.
  208. #
  209. #local_recipient_maps = unix:passwd.byname $alias_maps
  210. #local_recipient_maps = proxy:unix:passwd.byname $alias_maps
  211. #local_recipient_maps =
  213. # The unknown_local_recipient_reject_code specifies the SMTP server
  214. # response code when a recipient domain matches $mydestination or
  215. # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
  216. # and the recipient address or address local-part is not found.
  217. #
  218. # The default setting is 550 (reject mail) but it is safer to start
  219. # with 450 (try again later) until you are certain that your
  220. # local_recipient_maps settings are OK.
  221. #
  222. unknown_local_recipient_reject_code = 550
  224. # TRUST AND RELAY CONTROL
  226. # The mynetworks parameter specifies the list of "trusted" SMTP
  227. # clients that have more privileges than "strangers".
  228. #
  229. # In particular, "trusted" SMTP clients are allowed to relay mail
  230. # through Postfix.  See the smtpd_recipient_restrictions parameter
  231. # in postconf(5).
  232. #
  233. # You can specify the list of "trusted" network addresses by hand
  234. # or you can let Postfix do it for you (which is the default).
  235. #
  236. # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
  237. # clients in the same IP subnetworks as the local machine.
  238. # On Linux, this does works correctly only with interfaces specified
  239. # with the "ifconfig" command.
  240. #
  241. # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
  242. # clients in the same IP class A/B/C networks as the local machine.
  243. # Don't do this with a dialup site - it would cause Postfix to "trust"
  244. # your entire provider's network.  Instead, specify an explicit
  245. # mynetworks list by hand, as described below.
  246. # 
  247. # Specify "mynetworks_style = host" when Postfix should "trust"
  248. # only the local machine.
  249. #
  250. #mynetworks_style = class
  251. #mynetworks_style = subnet
  252. #mynetworks_style = host
  254. # Alternatively, you can specify the mynetworks list by hand, in
  255. # which case Postfix ignores the mynetworks_style setting.
  256. #
  257. # Specify an explicit list of network/netmask patterns, where the
  258. # mask specifies the number of bits in the network part of a host
  259. # address.
  260. #
  261. # You can also specify the absolute pathname of a pattern file instead
  262. # of listing the patterns here. Specify type:table for table-based lookups
  263. # (the value on the table right-hand side is not used).
  264. #
  265. #mynetworks = 168.100.189.0/28, 127.0.0.0/8
  266. #mynetworks = $config_directory/mynetworks
  267. #mynetworks = hash:/etc/postfix/network_table
  269. # The relay_domains parameter restricts what destinations this system will
  270. # relay mail to.  See the smtpd_recipient_restrictions description in
  271. # postconf(5) for detailed information.
  272. #
  273. # By default, Postfix relays mail
  274. # - from "trusted" clients (IP address matches $mynetworks) to any destination,
  275. # - from "untrusted" clients to destinations that match $relay_domains or
  276. #   subdomains thereof, except addresses with sender-specified routing.
  277. # The default relay_domains value is $mydestination.
  278. #
  279. # In addition to the above, the Postfix SMTP server by default accepts mail
  280. # that Postfix is final destination for:
  281. # - destinations that match $inet_interfaces or $proxy_interfaces,
  282. # - destinations that match $mydestination
  283. # - destinations that match $virtual_alias_domains,
  284. # - destinations that match $virtual_mailbox_domains.
  285. # These destinations do not need to be listed in $relay_domains.
  286. #
  287. # Specify a list of hosts or domains, /file/name patterns or type:name
  288. # lookup tables, separated by commas and/or whitespace.  Continue
  289. # long lines by starting the next line with whitespace. A file name
  290. # is replaced by its contents; a type:name table is matched when a
  291. # (parent) domain appears as lookup key.
  292. #
  293. # NOTE: Postfix will not automatically forward mail for domains that
  294. # list this system as their primary or backup MX host. See the
  295. # permit_mx_backup restriction description in postconf(5).
  296. #
  297. #relay_domains = $mydestination
  299. # INTERNET OR INTRANET
  301. # The relayhost parameter specifies the default host to send mail to
  302. # when no entry is matched in the optional transport(5) table. When
  303. # no relayhost is given, mail is routed directly to the destination.
  304. #
  305. # On an intranet, specify the organizational domain name. If your
  306. # internal DNS uses no MX records, specify the name of the intranet
  307. # gateway host instead.
  308. #
  309. # In the case of SMTP, specify a domain, host, host:port, [host]:port,
  310. # [address] or [address]:port; the form [host] turns off MX lookups.
  311. #
  312. # If you're connected via UUCP, see also the default_transport parameter.
  313. #
  314. #relayhost = $mydomain
  315. #relayhost = [gateway.my.domain]
  316. #relayhost = [mailserver.isp.tld]
  317. #relayhost = uucphost
  318. #relayhost = [an.ip.add.ress]
  320. relayhost = 172.1.2.3
  323. # REJECTING UNKNOWN RELAY USERS
  324. #
  325. # The relay_recipient_maps parameter specifies optional lookup tables
  326. # with all addresses in the domains that match $relay_domains.
  327. #
  328. # If this parameter is defined, then the SMTP server will reject
  329. # mail for unknown relay users. This feature is off by default.
  330. #
  331. # The right-hand side of the lookup tables is conveniently ignored.
  332. # In the left-hand side, specify an @domain.tld wild-card, or specify
  333. # a user@domain.tld address.
  334. #
  335. #relay_recipient_maps = hash:/etc/postfix/relay_recipients
  337. # INPUT RATE CONTROL
  338. #
  339. # The in_flow_delay configuration parameter implements mail input
  340. # flow control. This feature is turned on by default, although it
  341. # still needs further development (it's disabled on SCO UNIX due
  342. # to an SCO bug).
  343. #
  344. # A Postfix process will pause for $in_flow_delay seconds before
  345. # accepting a new message, when the message arrival rate exceeds the
  346. # message delivery rate. With the default 100 SMTP server process
  347. # limit, this limits the mail inflow to 100 messages a second more
  348. # than the number of messages delivered per second.
  349. #
  350. # Specify 0 to disable the feature. Valid delays are 0..10.
  351. #
  352. #in_flow_delay = 1s
  354. # ADDRESS REWRITING
  355. #
  356. # The ADDRESS_REWRITING_README document gives information about
  357. # address masquerading or other forms of address rewriting including
  358. # username->Firstname.Lastname mapping.
  360. # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
  361. #
  362. # The VIRTUAL_README document gives information about the many forms
  363. # of domain hosting that Postfix supports.
  365. # "USER HAS MOVED" BOUNCE MESSAGES
  366. #
  367. # See the discussion in the ADDRESS_REWRITING_README document.
  369. # TRANSPORT MAP
  370. #
  371. # See the discussion in the ADDRESS_REWRITING_README document.
  373. # ALIAS DATABASE
  374. #
  375. # The alias_maps parameter specifies the list of alias databases used
  376. # by the local delivery agent. The default list is system dependent.
  377. #
  378. # On systems with NIS, the default is to search the local alias
  379. # database, then the NIS alias database. See aliases(5) for syntax
  380. # details.
  381. #
  382. # If you change the alias database, run "postalias /etc/aliases" (or
  383. # wherever your system stores the mail alias file), or simply run
  384. # "newaliases" to build the necessary DBM or DB file.
  385. #
  386. # It will take a minute or so before changes become visible.  Use
  387. # "postfix reload" to eliminate the delay.
  388. #
  389. #alias_maps = dbm:/etc/aliases
  390. alias_maps = hash:/etc/aliases
  391. #alias_maps = hash:/etc/aliases, nis:mail.aliases
  392. #alias_maps = netinfo:/aliases
  394. # The alias_database parameter specifies the alias database(s) that
  395. # are built with "newaliases" or "sendmail -bi".  This is a separate
  396. # configuration parameter, because alias_maps (see above) may specify
  397. # tables that are not necessarily all under control by Postfix.
  398. #
  399. #alias_database = dbm:/etc/aliases
  400. #alias_database = dbm:/etc/mail/aliases
  401. alias_database = hash:/etc/aliases
  402. #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
  404. # ADDRESS EXTENSIONS (e.g., user+foo)
  405. #
  406. # The recipient_delimiter parameter specifies the separator between
  407. # user names and address extensions (user+foo). See canonical(5),
  408. # local(8), relocated(5) and virtual(5) for the effects this has on
  409. # aliases, canonical, virtual, relocated and .forward file lookups.
  410. # Basically, the software tries user+foo and .forward+foo before
  411. # trying user and .forward.
  412. #
  413. #recipient_delimiter = +
  415. # DELIVERY TO MAILBOX
  416. #
  417. # The home_mailbox parameter specifies the optional pathname of a
  418. # mailbox file relative to a user's home directory. The default
  419. # mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
  420. # "Maildir/" for qmail-style delivery (the / is required).
  421. #
  422. #home_mailbox = Mailbox
  423. #home_mailbox = Maildir/
  425. # The mail_spool_directory parameter specifies the directory where
  426. # UNIX-style mailboxes are kept. The default setting depends on the
  427. # system type.
  428. #
  429. #mail_spool_directory = /var/mail
  430. #mail_spool_directory = /var/spool/mail
  432. # The mailbox_command parameter specifies the optional external
  433. # command to use instead of mailbox delivery. The command is run as
  434. # the recipient with proper HOME, SHELL and LOGNAME environment settings.
  435. # Exception:  delivery for root is done as $default_user.
  436. #
  437. # Other environment variables of interest: USER (recipient username),
  438. # EXTENSION (address extension), DOMAIN (domain part of address),
  439. # and LOCAL (the address localpart).
  440. #
  441. # Unlike other Postfix configuration parameters, the mailbox_command
  442. # parameter is not subjected to $parameter substitutions. This is to
  443. # make it easier to specify shell syntax (see example below).
  444. #
  445. # Avoid shell meta characters because they will force Postfix to run
  446. # an expensive shell process. Procmail alone is expensive enough.
  447. #
  448. # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
  449. # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
  450. #
  451. #mailbox_command = /some/where/procmail
  452. #mailbox_command = /some/where/procmail -a "$EXTENSION"
  454. # The mailbox_transport specifies the optional transport in master.cf
  455. # to use after processing aliases and .forward files. This parameter
  456. # has precedence over the mailbox_command, fallback_transport and
  457. # luser_relay parameters.
  458. #
  459. # Specify a string of the form transport:nexthop, where transport is
  460. # the name of a mail delivery transport defined in master.cf.  The
  461. # :nexthop part is optional. For more details see the sample transport
  462. # configuration file.
  463. #
  464. # NOTE: if you use this feature for accounts not in the UNIX password
  465. # file, then you must update the "local_recipient_maps" setting in
  466. # the main.cf file, otherwise the SMTP server will reject mail for   
  467. # non-UNIX accounts with "User unknown in local recipient table".
  468. #
  469. #mailbox_transport = lmtp:unix:/file/name
  470. #mailbox_transport = cyrus
  472. # The fallback_transport specifies the optional transport in master.cf
  473. # to use for recipients that are not found in the UNIX passwd database.
  474. # This parameter has precedence over the luser_relay parameter.
  475. #
  476. # Specify a string of the form transport:nexthop, where transport is
  477. # the name of a mail delivery transport defined in master.cf.  The
  478. # :nexthop part is optional. For more details see the sample transport
  479. # configuration file.
  480. #
  481. # NOTE: if you use this feature for accounts not in the UNIX password
  482. # file, then you must update the "local_recipient_maps" setting in
  483. # the main.cf file, otherwise the SMTP server will reject mail for   
  484. # non-UNIX accounts with "User unknown in local recipient table".
  485. #
  486. #fallback_transport = lmtp:unix:/file/name
  487. #fallback_transport = cyrus
  488. #fallback_transport =
  490. # The luser_relay parameter specifies an optional destination address
  491. # for unknown recipients.  By default, mail for unknown@$mydestination,
  492. # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
  493. # as undeliverable.
  494. #
  495. # The following expansions are done on luser_relay: $user (recipient
  496. # username), $shell (recipient shell), $home (recipient home directory),
  497. # $recipient (full recipient address), $extension (recipient address
  498. # extension), $domain (recipient domain), $local (entire recipient
  499. # localpart), $recipient_delimiter. Specify ${name?value} or
  500. # ${name:value} to expand value only when $name does (does not) exist.
  501. #
  502. # luser_relay works only for the default Postfix local delivery agent.
  503. #
  504. # NOTE: if you use this feature for accounts not in the UNIX password
  505. # file, then you must specify "local_recipient_maps =" (i.e. empty) in
  506. # the main.cf file, otherwise the SMTP server will reject mail for   
  507. # non-UNIX accounts with "User unknown in local recipient table".
  508. #
  509. #luser_relay = $user@other.host
  510. #luser_relay = $local@other.host
  511. #luser_relay = admin+$local
  512.  
  513. # JUNK MAIL CONTROLS
  514. #
  515. # The controls listed here are only a very small subset. The file
  516. # SMTPD_ACCESS_README provides an overview.
  518. # The header_checks parameter specifies an optional table with patterns
  519. # that each logical message header is matched against, including
  520. # headers that span multiple physical lines.
  521. #
  522. # By default, these patterns also apply to MIME headers and to the
  523. # headers of attached messages. With older Postfix versions, MIME and
  524. # attached message headers were treated as body text.
  525. #
  526. # For details, see "man header_checks".
  527. #
  528. #header_checks = regexp:/etc/postfix/header_checks
  530. # FAST ETRN SERVICE
  531. #
  532. # Postfix maintains per-destination logfiles with information about
  533. # deferred mail, so that mail can be flushed quickly with the SMTP
  534. # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
  535. # See the ETRN_README document for a detailed description.
  536. #
  537. # The fast_flush_domains parameter controls what destinations are
  538. # eligible for this service. By default, they are all domains that
  539. # this server is willing to relay mail to.
  540. #
  541. #fast_flush_domains = $relay_domains
  543. # SHOW SOFTWARE VERSION OR NOT
  544. #
  545. # The smtpd_banner parameter specifies the text that follows the 220
  546. # code in the SMTP server's greeting banner. Some people like to see
  547. # the mail version advertised. By default, Postfix shows no version.
  548. #
  549. # You MUST specify $myhostname at the start of the text. That is an
  550. # RFC requirement. Postfix itself does not care.
  551. #
  552. #smtpd_banner = $myhostname ESMTP $mail_name
  553. #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
  555. # PARALLEL DELIVERY TO THE SAME DESTINATION
  556. #
  557. # How many parallel deliveries to the same user or domain? With local
  558. # delivery, it does not make sense to do massively parallel delivery
  559. # to the same user, because mailbox updates must happen sequentially,
  560. # and expensive pipelines in .forward files can cause disasters when
  561. # too many are run at the same time. With SMTP deliveries, 10
  562. # simultaneous connections to the same domain could be sufficient to
  563. # raise eyebrows.
  564. #
  565. # Each message delivery transport has its XXX_destination_concurrency_limit
  566. # parameter.  The default is $default_destination_concurrency_limit for
  567. # most delivery transports. For the local delivery agent the default is 2.
  569. #local_destination_concurrency_limit = 2
  570. #default_destination_concurrency_limit = 20
  572. # DEBUGGING CONTROL
  573. #
  574. # The debug_peer_level parameter specifies the increment in verbose
  575. # logging level when an SMTP client or server host name or address
  576. # matches a pattern in the debug_peer_list parameter.
  577. #
  578. debug_peer_level = 2
  580. # The debug_peer_list parameter specifies an optional list of domain
  581. # or network patterns, /file/name patterns or type:name tables. When
  582. # an SMTP client or server host name or address matches a pattern,
  583. # increase the verbose logging level by the amount specified in the
  584. # debug_peer_level parameter.
  585. #
  586. #debug_peer_list = 127.0.0.1
  587. #debug_peer_list = some.domain
  589. # The debugger_command specifies the external command that is executed
  590. # when a Postfix daemon program is run with the -D option.
  591. #
  592. # Use "command .. & sleep 5" so that the debugger can attach before
  593. # the process marches on. If you use an X-based debugger, be sure to
  594. # set up your XAUTHORITY environment variable before starting Postfix.
  595. #
  596. debugger_command =
  597.          PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
  598.          xxgdb $daemon_directory/$process_name $process_id & sleep 5
  600. # If you can't use X, use this to capture the call stack when a
  601. # daemon crashes. The result is in a file in the configuration
  602. # directory, and is named after the process name and the process ID.
  603. #
  604. # debugger_command =
  605. #       PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
  606. #       echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
  607. #       >$config_directory/$process_name.$process_id.log & sleep 5
  608. #
  609. # Another possibility is to run gdb under a detached screen session.
  610. # To attach to the screen sesssion, su root and run "screen -r
  611. # <id_string>" where <id_string> uniquely matches one of the detached
  612. # sessions (from "screen -list" ).
  613. #
  614. # debugger_command =
  615. #       PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
  616. #       -dmS $process_name gdb $daemon_directory/$process_name
  617. #       $process_id & sleep 1
  619. # INSTALL-TIME CONFIGURATION INFORMATION
  620. #
  621. # The following parameters are used when installing a new Postfix version.
  622. #
  623. # sendmail_path: The full pathname of the Postfix sendmail command.
  624. # This is the Sendmail-compatible mail posting interface.
  625. #
  626. sendmail_path = /usr/sbin/sendmail.postfix
  628. # newaliases_path: The full pathname of the Postfix newaliases command.
  629. # This is the Sendmail-compatible command to build alias databases.
  630. #
  631. newaliases_path = /usr/bin/newaliases.postfix
  633. # mailq_path: The full pathname of the Postfix mailq command.  This
  634. # is the Sendmail-compatible mail queue listing command.
  635. #
  636. mailq_path = /usr/bin/mailq.postfix
  638. # setgid_group: The group for mail submission and queue management
  639. # commands.  This must be a group name with a numerical group ID that
  640. # is not shared with other accounts, not even with the Postfix account.
  641. #
  642. setgid_group = postdrop
  644. # html_directory: The location of the Postfix HTML documentation.
  645. #
  646. html_directory = no
  648. # manpage_directory: The location of the Postfix on-line manual pages.
  649. #
  650. manpage_directory = /usr/share/man
  652. # sample_directory: The location of the Postfix sample configuration files.
  653. # This parameter is obsolete as of Postfix 2.1.
  654. #
  655. sample_directory = /usr/share/doc/postfix-2.2.2/samples
  657. # readme_directory: The location of the Postfix README files.
  658. #
  659. readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES
  663. #smtpd_sender_restrictions = reject_unknown_sender_domain, reject_non_fqdn_sender
  664. #smtpd_recipient_restrictions = permit_mynetworks, check_relay_domains
  665. masquerade_domains=$mydomain
  666. virtual_maps=hash:/etc/postfix/virtual
  667. canonical_maps=hash:/etc/postfix/canonical


Message édité par madsurfer le 26-05-2006 à 16:27:06
mood
Publicité
Posté le 26-05-2006 à 11:57:10  profilanswer
 

n°813418
madsurfer
Boulet's eradicator
Posté le 26-05-2006 à 16:04:20  profilanswer
 

:hello:
 
J'ai résolu le 1er probleme  :wahoo: en rajoutant dans mon :
 
main.cf
 

Code :
  1. transport_maps=hash:/etc/postfix/transport


 
transport
 
monentreprise.com       smtp:1.2.3.4:25


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  réseaux et sécurité

  [ Postfix ] Routage de mail

 

Sujets relatifs
On se sert de mon Postfix pour envoyer masse mails !!postfix
Envoie de mail en passant par exchangePostfix procmail lent....
Routage IP privée / publiqueroutage port vers internet
erreur postfixPlateforme de Messagerie Multidomaines Full Debian (Postfix,MySQL,...)
serveur de messagerie Postfix 
Plus de sujets relatifs à : [ Postfix ] Routage de mail

Forum MesDiscussions.Net, Version 2010.2
(c) 2000-2011 Doctissimo
Page générée en 0.193 secondes

Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR