Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
1508 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs

  configuration parfeu shorewall et squid

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

configuration parfeu shorewall et squid

n°750960
limax
Posté le 10-11-2005 à 21:41:01  profilanswer
 

bonjour
 
j'ai voullu installer un contrôle parentale, et j'ai installer squid. Je n'arrive plus (ou pas?) à configurer shorewall. Squid fonctionne bien. Pour tester j'ai mozilla sur port 3128 et epiphany sur port 80.
si j'ai dans policy
fw  net  ACCEPT
net  all  DROP  info
# The FOLLOWING POLICY MUST BE LAST
all  all  REJECT  info

 
 tout passe même sans règle sur le port 80 ou 3128
si je met fw  net REJECT  je n'arrive plus rien à avoir même avec des règles.
Bref je ne comprends plus rien.
 
J'ai actuellement ceci dans zone
net Net  Internet
loc        Local          Local networks

 
Est ce c'est squid qui fait office de parfeu?
 
Je précise que j'avais l'habitude de configurer shorewall en éditant les fichiers de /etc/shorewall et pas en utilisant un gui.
je suis sous debian sid
 
Je ne connais pas grand chose en réseau, je suis derrière une freebox un seul ordinateur, j'obtiens l'ip par dhcp.
merci de m'éclairer car plus je lis moins je comprends. problème de configuration squid?
 
voici ifconfig:
root@localhost:/etc/shorewall# ifconfig
eth0      Lien encap:Ethernet  HWaddr 00:50:FC:44:5D:53
          inet adr:82.250.80.148  Bcast:82.250.80.255  Masque:255.255.255.0
          adr inet6: fe80::250:fcff:fe44:5d53/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:14918 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12173 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:12609206 (12.0 MiB)  TX bytes:1256396 (1.1 MiB)
          Interruption:177 Adresse de base:0x9800
 
lo        Lien encap:Boucle locale
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:109191 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109191 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:32490715 (30.9 MiB)  TX bytes:32490715 (30.9 MiB)

 
voici route:
root@localhost:/etc/shorewall# route
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
82.250.80.0     *               255.255.255.0   U     0      0        0 eth0
default         lns-bzn-3-82-25 0.0.0.0         UG    0      0        0 eth0

 
 
mon fichier  /etc/network/interface
auto lo
iface lo inet loopback
 
auto eth0
iface eth0 inet dhcp

 
 
dans mon squid conf j'ai ceci  
#Default:
 http_port 3128
#Recommended minimum configuration:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563 # https, snews
acl SSL_ports port 873  # rsync
acl Safe_ports port 80  # http
acl Safe_ports port 21  # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70  # gopher
acl Safe_ports port 210  # wais#Recommended minimum configuration:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563 # https, snews
acl SSL_ports port 873  # rsync
acl Safe_ports port 80  # http
acl Safe_ports port 21  # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70  # gopher
acl Safe_ports port 210  # wais
 
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280  # http-mgmt
acl Safe_ports port 488  # gss-http
acl Safe_ports port 591  # filemaker
acl Safe_ports port 777  # multiling http
acl Safe_ports port 631  # cups
acl Safe_ports port 873  # rsync
acl Safe_ports port 901  # SWAT
acl purge method PURGE
acl CONNECT method CONNECT
 
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager
# Only allow purge requests from localhost
http_access allow purge localhost
http_access deny purge
# Deny requests to unknown ports
http_access deny !Safe_ports
# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
#
#http_access allow our_networks
http_access allow localhost
 
# And finally deny all other access to this proxy
http_access deny all
# none
visible_hostname localnet
redirect_program /usr/bin/squidGuard
redirect_children 4

mood
Publicité
Posté le 10-11-2005 à 21:41:01  profilanswer
 


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs

  configuration parfeu shorewall et squid

 

Sujets relatifs
Quel configuration réseau me conseillez vous ?[Squid] Bloquer le téléchargement
[CONFIGURATION freebox usb Debian ]problème de configuration de samba
besoin d aide shorewall squid dansguardianConfiguration Apache et virtual hosting HELP
configuration modem sous linux ?configuration de touches "multimédia" sur un clavier ?
problème configuration fstab 
Plus de sujets relatifs à : configuration parfeu shorewall et squid


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR