# Copyright 1999-2003 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
# $Header: /home/cvsroot/gentoo-x86/app-office/openoffice/openoffice-1.0.3-r1.ebuild,v 1.1 2003/05/25 08:11:53 pauldv Exp $
# IMPORTANT: This is extremely alpha!!!
# Notes:
#
# This will take a HELL of a long time to compile, be warned.
# According to openoffice.org, it takes approximately 12 hours on a
# P3/600 with 256mb ram. And thats where building is its only task.
#
# It takes about 6 hours on my P4 1.8 with 512mb memory, and the
# build only needs about 2.1GB of disk space - Azarah.
#
# You will also need a bucketload of diskspace ... in the order of
# 4-5 gb free to store all the compiled files and installation
# directories.
#
# The information on how to build and what is required comes from:
# http://www.openoffice.org/dev_docs/source/build_linux.html
# http://tools.openoffice.org/ext_comp.html
#
# Todo:
#
# Support for installing more than one language pack.
# Support for installing native-dictionaries. (maybe ooodi is enough?)
# Language Check
[ -z ${LANGUAGE} ] && LANGUAGE=01
case ${LANGUAGE} in
01|07|33|34|35|39|42|46|49|81|82|86|88)
LHELP=${LANGUAGE}
;;
*)
LHELP=01
HSUPPORT=false
;;
esac
case ${LANGUAGE} in
01|03|07|30|31|33|34|35|34c|37|39|45|46|48|49|55|66|81|82|86|88|90|91|96|97)
LANGUAGE=${LANGUAGE}
;;
*)
LANGUAGE=01
LSUPPORT=false
;;
esac
case $LANGUAGE in
# ENUS is always set
# 01) LENV="RES_ENUS";;
03) LENV="RES_PORT";;
07) LENV="RES_RUSS";;
30) LENV="RES_GREEK";;
33) LENV="RES_FREN";;
34) LENV="RES_SPAN";;
35) LENV="RES_FINN";;
34c|37) LENV="RES_CAT";;
39) LENV="RES_ITAL";;
45) LENV="RES_DAN";;
46) LENV="RES_SWED";;
48) LENV="RES_POL";;
49) LENV="RES_GER";;
55) LENV="RES_PORTBR";;
66) LENV="RES_THAI";;
81) LENV="RES_JAPN";;
82) LENV="RES_KOREAAN";;
86) LENV="RES_CHINSIM";;
88) LENV="RES_CHINTRAD";;
90) LENV="RES_TURK";;
91) LENV="RES_HINDI";;
96) LENV="RES_ARAB";;
97) LENV="RES_HEBREW";;
esac
inherit flag-o-matic eutils
# Compile problems with these ...
filter-flags "-funroll-loops"
filter-flags "-fomit-frame-pointer"
replace-flags "-O3" "-O2"
ALLOWED_FLAGS="-O -O1 -O2 -Os -mcpu -march -pipe"
strip-flags
# Enable Bytecode Interpreter for freetype ...
append-flags "-DTT_CONFIG_OPTION_BYTECODE_INTERPRETER"
inherit gcc
# We want gcc3 if possible!!!!
export WANT_GCC_3="yes"
inherit virtualx
# Set $ECPUS to amount of processes multiprocessing build should use.
# NOTE: Setting this too high might cause dmake to segfault!!
# Setting this to anything but "1" on my pentium4 causes things
# to segfault :(
[ -z "${ECPUS}" ] && export ECPUS="1"
LOC="/opt"
FT_VER="2.1.3"
STLP_VER="4.5.3"
INSTDIR="${LOC}/OpenOffice.org${PV}"
S="${WORKDIR}/oo_${PV}_src"
DESCRIPTION="OpenOffice.org, a full office productivity suite."
SRC_URI="http://ny1.mirror.openoffice.org/stable/${PV}/OOo_${PV}_source.tar.bz2
http://sf1.mirror.openoffice.org/stable/${PV}/OOo_${PV}_source.tar.bz2
http://www.stlport.org/archive/STLport-${STLP_VER}.tar.gz
ftp://ftp.cs.man.ac.uk/pub/toby/gpc/gpc231.tar.Z
mirror://sourceforge/freetype/freetype-${FT_VER}.tar.bz2
ftp://ftp.services.openoffice.org/pub/OpenOffice.org/contrib/helpcontent/helpcontent_${LHELP}_unix.tgz"
HOMEPAGE="http://www.openoffice.org/"
LICENSE="LGPL-2 | SISSL-1.1"
SLOT="0"
KEYWORDS="x86 ppc"
IUSE="gnome kde"
RDEPEND=">=sys-libs/glibc-2.1
>=dev-lang/perl-5.0
>=x11-libs/gtk+-2.2
>=gnome-base/libgnome-2.2
>=gnome-extra/libgnomecups-1
virtual/x11
app-arch/zip
app-arch/unzip
dev-libs/expat
>=virtual/jdk-1.3.1
virtual/lpr
ppc? ( >=sys-libs/glibc-2.2.5-r7
>=sys-devel/gcc-3.2 )" # needed for sqrtl patch recently introduced
DEPEND="${RDEPEND}
app-shells/tcsh
!app-office/openoffice-bin
!app-office/openoffice"
# fix a bug with tcsh and dircolors
#
# Azarah -- 10 April 2002
export LS_COLORS=""
pkg_setup() {
if [ "$(gcc-version)" != "3.2" ]
then
eerror
eerror "This build needs gcc-3.2 or later, but due to profile"
eerror "settings, it cannot DEPEND on it, so please merge it"
eerror "manually:"
eerror
eerror " # ebuild ${PORTDIR}/sys-devel/gcc/gcc-3.2.1.ebuild merge"
eerror
eerror "Please make sure that you use the latest availible revision of"
eerror "gcc-3.2. Thus if there is already a gcc-3.2.1-r2 out, use this"
eerror "rather than 3.2.1, etc."
eerror
eerror "As of writing, gcc-3.2.1 seemed to create the most stable builds."
eerror "Also, because OO is such a complex build, ONLY gcc-3.2.1 will be"
eerror "supported!"
eerror
eerror "This process is not highly recomended, as upgrading your compiler"
eerror "without upgrading your distribution can be detrimental to your "
eerror "installation of gentoo, unless you know what you're getting into"
eerror
die
fi
if [ -z "$(echo ${JDK_HOME} | grep "blackdown" )" ] && [ "${FORCE_JAVA}" != "yes" ]
then
eerror
eerror "This ebuild has only been tested with the blackdown port of"
eerror "java. If you use another java implementation, it could fail"
eerror "horribly, so please merge the blackdown-jdk and set it as"
eerror "system VM before proceeding:"
eerror
eerror " # emerge blackdown-jdk"
eerror " # java-config --set-system-vm=blackdown-jdk-<VERSION>"
eerror " # env-update"
eerror " # source /etc/profile"
eerror
eerror "Please adjust <VERSION> according to the version installed in"
eerror "/opt."
eerror
eerror "If you however want to test another JDK (not officially supported),"
eerror "you could do the following:"
eerror
eerror " # export FORCE_JAVA=yes"
eerror die
fi
ewarn "****************************************************************"
ewarn " It is important to note that OpenOffice.org is a very fragile "
ewarn " build when it comes to CFLAGS. A number of flags have already "
ewarn " been filtered out. If you experience difficulty merging this "
ewarn " package and use agressive CFLAGS, lower the CFLAGS and try to "
ewarn " merge again. "
ewarn "****************************************************************"
ewarn "****************************************************************"
ewarn " Selected Lanuage: ${LANGUAGE} "
ewarn " "
ewarn " To build Openoffice in your native language start emerge with "
ewarn " LANGUAGE=XX emerge openoffice "
ewarn " To see all supported languagess visit. (as well as for the "
ewarn " specific LANGUAGE=XX settings you might need "
ewarn " http://l10n.openoffice.org/all_supported_languages.html "
ewarn " "
ewarn " To install language specified dictionaries emerge ooodi "
ewarn "****************************************************************"
if [ "${LSUPPORT}" = "false" ];
then
ewarn "****************************************************************"
ewarn " Your language is not supported by OpenOffice, "
ewarn " falling back to default value !!! "
ewarn "****************************************************************"
elif [ "${HSUPPORT}" = "false" ];
then
ewarn "****************************************************************"
ewarn " There are no helpfiles available for your language, "
ewarn " falling back to default value !!! "
ewarn "****************************************************************"
fi
}
oo_setup() {
# unset LANGUAGE
# unset LANG
export NEW_GCC="0"
if [ -x /usr/sbin/gcc-config ]
then
# Do we have a gcc that use the new layout and gcc-config ?
if /usr/sbin/gcc-config --get-current-profile &> /dev/null
then
export NEW_GCC="1"
export GCC_PROFILE="$(/usr/sbin/gcc-config --get-current-profile)"
# Just recheck gcc version ...
if [ "$(gcc-version)" != "3.2" ]
then
# See if we can get a gcc profile we know is proper ...
if /usr/sbin/gcc-config --get-bin-path ${CHOST}-3.2.1 &> /dev/null
then
export PATH="$(/usr/sbin/gcc-config --get-bin-path ${CHOST}-3.2.1):${PATH}"
export GCC_PROFILE="${CHOST}-3.2.1"
else
eerror "This build needs gcc-3.2 or later!"
eerror
eerror "Use gcc-config to change your gcc profile:"
eerror
eerror " # gcc-config $CHOST-3.2.1"
eerror
eerror "or whatever gcc version is relevant."
die
fi
fi
fi
fi
export JAVA_BINARY="`which java`"
}
src_unpack() {
oo_setup
cd ${WORKDIR}
unpack OOo_${PV}_source.tar.bz2 gpc231.tar.Z
tar -zxf ${FILESDIR}/${PV}/ooo-build-1.0.7.tar.gz
# Install gpc
cd ${WORKDIR}/gpc231
cp gpc.* ${S}/external/gpc
cd ${S}
# This resolves missing symbols (Debian)
epatch ${FILESDIR}/${PV}/${PN}-1.0.1-compiler-flags.patch
# Misc Debian patches to fixup build
epatch ${FILESDIR}/${PV}/${PN}-1.0.1-no-mozab.patch
echo "moz moz : NULL" > ${S}/moz/prj/build.lst
# Misc patches from Mandrake
# epatch ${FILESDIR}/${PV}/${PN}-1.0.1-fix-asm.patch
# Get OO to use STLport-4.5.3 (Az)
cp ${DISTDIR}/STLport-${STLP_VER}.tar.gz ${S}/stlport/download || die
cd ${S}/stlport
if [ "${NEW_GCC}" -eq "1" ]
then
epatch ${FILESDIR}/${PV}/${PN}-1.0.1-use-STLport-4.5.3-newgcc.patch
else
epatch ${FILESDIR}/${PV}/${PN}-1.0.1-use-STLport-4.5.3.patch
fi
cd ${S}
# Seth -- Dec 1 2002
if [ "$(echo ${JAVA_BINARY} | egrep 'j(2s)?dk-1.4')" ]
then
epatch ${FILESDIR}/${PV}/${PN}-1.0.1-fix-jdk-1.4.0.patch
fi
# Debian patch to fix an xinteraction handler build error (Seth)
epatch ${FILESDIR}/${PV}/${PN}-1.0.1-xinteraction-fix.patch
# Get OO to build with freetype-2.1.3
# einfo "Moving freetype-${FT_VER}.tar.bz2 in place ..."
# cp ${DISTDIR}/freetype-${FT_VER}.tar.bz2 ${S}/freetype/download || die
# We need it as a .tar.gz ...
# bzip2 -d ${S}/freetype/download/freetype-${FT_VER}.tar.bz2 || die
# gzip -1 ${S}/freetype/download/freetype-${FT_VER}.tar
# OK, copy the new patch in place, and fixup some other things ...
# cp ${FILESDIR}/${PV}/freetype-${FT_VER}.patch ${S}/freetype || die
# epatch ${FILESDIR}/${PV}/${PN}-1.0.1-use-freetype-${FT_VER}.patch
# Now for our optimization flags ...
perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
${S}/solenv/inc/unxlngi3.mk
perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
${S}/solenv/inc/unxlngi4.mk
# Some makefiles are not multiprocess ready (Mandrake)
cd ${S}; einfo "Fixing makefiles for multiprocess builds..."
for x in io/source/stm dtrans/source/X11 idlc/source nas zlib toolkit/util \
comphelper/util padmin/source svtools/util bridges/source/prot_uno \
ucb/source/ucp/ftpproxy framework/util framework/source/unotypes
do
perl -pi -e "s/^(PRJNAME)/MAXPROCESS=1\n\1/" ${x}/makefile.mk
done
# epatch ${FILESDIR}/${PV}/${PN}-errno.patch
# einfo "Lets patch to get AA fonts..."
# epatch ${FILESDIR}/${PV}/${PN}-1.0.2-default-fonts.patch
# epatch ${FILESDIR}/${PV}/${PN}-1.0.2-ft-antialias-advice.patch
#This patches the stupid printer problem (to upgrade to 1.0.3.1)
# epatch ${FILESDIR}/${PV}/vcl.printcxx.OOO_STABLE_1_PORTS.100102.patch
einfo "Applying Ximian OO.org Maps"
${WORKDIR}/ooo-build-1.0.7/bin/install-maps ${WORKDIR}/oo_1.0.3_src/ ${WORKDIR}/ooo-build-1.0.7/ gcc3
einfo "Applying Ximian OO.org Patches"
${WORKDIR}/ooo-build-1.0.7/patches/apply.pl ${WORKDIR}/ooo-build-1.0.7/patches/OOO_1_0_3 ${WORKDIR}/oo_1.0.3_src
einfo "Installing / Scaling Icons"
${WORKDIR}/ooo-build-1.0.7/bin/scale-icons ${WORKDIR}/oo_1.0.3_src/
cp -avf ${WORKDIR}/ooo-build-1.0.7/icons/* ${WORKDIR}/oo_1.0.3_src/
}
get_EnvSet() {
# Determine what Env file we should be using (Az)
export LinuxEnvSet="LinuxIntelEnv.Set"
use sparc && export LinuxEnvSet="LinuxSparcEnv.Set"
use sparc64 && export LinuxEnvSet="LinuxSparcEnv.Set"
use ppc && export LinuxEnvSet="LinuxPPCEnv.Set"
use alpha && export LinuxEnvSet="LinuxAlphaEnv.Set"
# Get build specific stuff (Az)
export SOLVER="$(awk '/^setenv UPD / {gsub(/\"/, "" ); print $3}' ${LinuxEnvSet})"
export SOLPATH="$(awk '/^setenv INPATH / {gsub(/\"/, "" ); print $3}' ${LinuxEnvSet})"
}
src_compile() {
local buildcmd=""
oo_setup
# Setup default compilers (We overide gcc2 if that is default here)
export CC="$(gcc-getCC)"
export CXX="$(gcc-getCXX)"
# Enable ccache for this build (Az)
if [ "${FEATURES/-ccache/}" = "${FEATURES}" -a \
"${FEATURES/ccache/}" != "${FEATURES}" -a \
-f /usr/bin/ccache -a -x /usr/bin/ccache ]
then
einfo "We're using ccache for this build..."
# Build uses its own env with $PATH, etc, so
# we take the easy way out. (Az)
export CC="/usr/bin/ccache ${CC}"
export CXX="/usr/bin/ccache ${CXX}"
fi
# Enable distcc for this build (Az)
if [ "${FEATURES/-distcc/}" = "${FEATURES}" -a \
"${FEATURES/distcc/}" != "${FEATURES}" -a \
-f /usr/bin/distcc -a -x /usr/bin/distcc ]
then
einfo "We're using distcc for this build..."
# Do not bump ECPUS if the user did not touch it, as currently
# it -PP do not work properly (segfaulting). (Az)
[ "$(echo ${DISTCC_HOSTS} | wc -w)" -gt 1 -a "${ECPUS}" -qt 1 ] && \
export ECPUS="$(echo ${DISTCC_HOSTS} | wc -w)"
export CC="/usr/bin/distcc ${CC}"
export CXX="/usr/bin/distcc ${CXX}"
fi
# Do NOT compile with a external STLport, as gcc-2.95.3 users will
# get linker errors due to the ABI being different (STLport will be
# compiled with 2.95.3, while OO is compiled with 3.x). (Az)
einfo "Configuring OpenOffice.org..."
cd ${S}/config_office
rm -f config.cache
./configure --enable-gcc3 \
--with-jdk-home=${JAVA_HOME} \
--with-x || die
cd ${S}
get_EnvSet
# Set language
[ ${LENV} ] && echo "setenv ${LENV} \"true\"" >> ${S}/${LinuxEnvSet}
# Do not include /usr/include in header search path, and
# same thing for internal gcc include dir, as gcc3 handles
# it correctly by default! (Az)
perl -pi -e "s| -I/usr/include||g" ${LinuxEnvSet}
# perl -pi -e "s| -I$(gcc-libpath)/include||g" ${LinuxEnvSet}
if [ "${NEW_GCC}" -eq "1" ]
then
local gcc_path="$(/usr/sbin/gcc-config --get-bin-path ${GCC_PROFILE})"
# Setup path for new gcc layout in $LinuxEnvSet, else the build
# environment will not find gcc ... (Az)
perl -pi -e "s|PATH \.:\$SOLARVER|PATH \.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
# New builds start quoting stuff ...
perl -pi -e "s|PATH \"\.:\$SOLARVER|PATH \"\.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
fi
# Should the build use multiprocessing?
# We use build.pl directly, as dmake tends to segfault. (Az)
if [ "${ECPUS}" -gt 1 ]
then
buildcmd="${S}/solenv/bin/build.pl -all -PP${ECPUS} product=full"
else
buildcmd="${S}/solenv/bin/build.pl -all product=full"
fi
if [ -z "$(grep 'CCCOMP' ${S}/${LinuxEnvSet})" ]
then
# Set CCCOMP and CXXCOMP. This is still needed for STLport
echo "setenv CCCOMP \"${CC}\"" >> ${S}/${LinuxEnvSet}
echo "setenv CXXCOMP \"${CXX}\"" >> ${S}/${LinuxEnvSet}
fi if [ "$(gcc-major-version)" -eq 3 ]
then
mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/{lib,inc}
einfo "Installing GCC related libs..."
# Workaround for missing libs with GCC3 (thanks to Debian) (Az)
cd ${S}/solver/${SOLVER}/${SOLPATH}/lib
cp $(gcc-libpath)/libstdc++.so.$(gcc-libstdcxx-major-version)* . || \
die "Could not copy gcc-libs!"
cp $(gcc-libpath)/libgcc_s.so* . || die "Could not copy gcc-libs!"
cd ${S}
fi
einfo "Bootstrapping OpenOffice.org..."
# Get things ready for bootstrap (Az)
chmod 0755 ${S}/solenv/bin/*.pl
mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/inc
touch ${S}/solver/${SOLVER}/${SOLPATH}/inc/minormkchanged.flg
# Bootstrap ...
./bootstrap
if [ "$(gcc-major-version)" -eq 3 ]
then
local LIBFILE="$(readlink `gcc-libpath`/libstdc++.so.`gcc-libstdcxx-major-version`)"
local LIBVERSION="$(echo ${LIBFILE} | sed -e 's|libstdc++\.so\.||g')"
# Get this beast to use the right version of libstdc++ ... (Az)
echo "LIBSTDCPP3:=${LIBVERSION}" >> \
${S}/solver/${SOLVER}/${SOLPATH}/inc/comp_ver.mk
cd ${S}
fi
# unpack help files
mkdir -p ${S}/solver/641/unxlngi4.pro/pck
cd ${S}/solver/641/unxlngi4.pro/pck
tar -xzf ${DISTDIR}/helpcontent_${LHELP}_unix.tgz
cd ${S}
einfo "Building OpenOffice.org..."
# Setup virtualmake
export maketype="tcsh"
echo "source ${S}/${LinuxEnvSet} && cd ${S}/instsetoo && ${buildcmd}" > build.tcsh
# Build needs X to compile! (Az)
virtualmake build.tcsh || die "Build failed!"
[ -d ${S}/instsetoo/${SOLPATH} ] || die "Cannot find build directory!"
}
src_install() {
# Sandbox issues; bug #11838
addpredict "/user"
addpredict "/share"
addpredict "/dev/dri"
get_EnvSet
# The install part should now be relatively OK compared to
# what it was. Basically we use autoresponse files to install
# unattended, running under a Xvfb if needed. Afterwards we
# just cleanout ${D} from the registry, etc. This way we
# do not need pre-generated registry, and also fixes some weird
# bugs related to the old way we did things.
#
# <azarah@gentoo.org> (9 Sep 2002)
# Autoresponse file for main installation
cat > ${T}/rsfile-global <<-"END_RS"
[ENVIRONMENT]
INSTALLATIONMODE=INSTALL_NETWORK
INSTALLATIONTYPE=STANDARD
DESTINATIONPATH=<destdir>
OUTERPATH=
LOGFILE=
LANGUAGELIST=<LANGUAGE>
[JAVA]
JavaSupport=preinstalled_or_none
END_RS
# Autoresponse file for user isntallation
cat > ${T}/rsfile-local <<-"END_RS"
[ENVIRONMENT]
INSTALLATIONMODE=INSTALL_WORKSTATION
INSTALLATIONTYPE=WORKSTATION
DESTINATIONPATH=<home>/.openoffice/<pv>
[JAVA]
JavaSupport=none
END_RS
# Fixing install location in response file
sed -e "s|<destdir>|${D}${INSTDIR}|" \
${T}/rsfile-global > ${T}/autoresponse
einfo "Installing OpenOffice.org into build root..."
dodir ${INSTDIR}
cd ${S}/instsetoo/${SOLPATH}/${LANGUAGE}/normal
# Setup virtualmake
export maketype="./setup"
# We need X to install...
virtualmake "-v -r:${T}/autoresponse"
echo
einfo "Removing build root from registy..."
# Remove totally useless stuff.
rm -f ${D}${INSTDIR}/program/{setup.log,sopatchlevel.sh}
# Remove build root from registry and co
egrep -rl "${D}" ${D}${INSTDIR}/* | \
xargs -i perl -pi -e "s|${D}||g" {} || :
einfo "Fixing permissions..."
# Fix permissions
find ${D}${INSTDIR}/ -type f -exec chmod a+r {} \;
chmod a+x ${D}${INSTDIR}/share/config/webcast/*.pl
# Fix symlinks
for x in "soffice program/spadmin" \
"program/setup setup" \
"program/spadmin spadmin"
do
dosym $(echo ${x} | awk '{print $1}') \
${INSTDIR}/$(echo ${x} | awk '{print $2}')
done
# Install user autoresponse file
insinto /etc/openoffice
sed -e "s|<pv>|${PV}|g" ${T}/rsfile-local > ${T}/autoresponse.conf
doins ${T}/autoresponse.conf
# Install wrapper script
exeinto /usr/bin
sed -e "s|<pv>|${PV}|g" \
${FILESDIR}/${PV}/ooffice-wrapper-1.3 > ${T}/ooffice
doexe ${T}/ooffice
# Component symlinks
dosym ooffice /usr/bin/oocalc
dosym ooffice /usr/bin/oodraw
dosym ooffice /usr/bin/ooimpress
dosym ooffice /usr/bin/oomath
dosym ooffice /usr/bin/oowriter
dosym ooffice /usr/bin/oosetup
dosym ooffice /usr/bin/oopadmin
einfo "Installing Menu shortcuts (need \"gnome\" or \"kde\" in USE)..."
if [ -n "`use gnome`" ]
then
insinto /usr/share/gnome/apps/OpenOffice.org
# Install the files needed for the catagory
doins ${D}${INSTDIR}/share/gnome/net/.directory
doins ${D}${INSTDIR}/share/gnome/net/.order
for x in ${D}${INSTDIR}/share/gnome/net/*.desktop
do
# We have to handle setup differently
perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
# Now fix the rest
perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
doins ${x}
done
fi
if [ -n "`use kde`" ]
then
local kdeloc="${D}${INSTDIR}/share/kde/net/applnk/OpenOffice.org${PV}"
# Portage do not work with the space ..
mv ${D}${INSTDIR}/share/kde/net/applnk/OpenOffice.org\ ${PV} ${kdeloc}
insinto /usr/share/applnk/OpenOffice.org
# Install the files needed for the catagory
doins ${kdeloc}/.directory
doins ${kdeloc}/.order
dodir /usr/share
# Install the icons and mime info
cp -a ${D}${INSTDIR}/share/kde/net/mimelnk/share/* ${D}/usr/share
for x in ${kdeloc}/*.desktop
do
# We have to handle setup differently
perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
# Now fix the rest
perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
doins ${x}
done
fi
# Unneeded, as they get installed into /usr/share...
rm -rf ${D}${INSTDIR}/share/{cde,gnome,kde}
for f in ${D}/usr/share/gnome/apps/OpenOffice.org/* ; do
echo 'Categories=Application;Office;' >> ${f}
done
# Make sure these do not get nuked.
keepdir ${INSTDIR}/user/config/registry/instance/org/openoffice/{Office,ucb}
keepdir ${INSTDIR}/user/psprint/{driver,fontmetric}
keepdir ${INSTDIR}/user/{autocorr,backup,plugin,store,temp,template}
}
pkg_preinst() {
# The one with OO-1.0.0 was not valid
if [ -f ${ROOT}/etc/openoffice/autoresponse.conf ]
then
rm -f ${ROOT}/etc/openoffice/autoresponse.conf
fi
}
pkg_postinst() {
einfo "******************************************************************"
einfo " To start OpenOffice.org, run:"
einfo
einfo " $ ooffice"
einfo
einfo " Also, for individual components, you can use any of:"
einfo
einfo " oocalc, oodraw, ooimpress, oomath or oowriter"
einfo
einfo " If the fonts appear garbled in the user interface refer to "
einfo " Bug 8539, or http://www.openoffice.org/FAQs/fontguide.html#8"
einfo einfo "******************************************************************"
} |