root@Stark Industrymnt# mount Storage/
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or helper program, or other error
       Dans quelques cas certaines informations sont utiles dans syslog - essayez
       dmesg | tail  ou quelque chose du genre

root@Stark Industry:~/Bureau# mdadm --detail /dev/md0
/dev/md0:
        Version : 00.90
  Creation Time : Sun Jan  4 21:28:03 2009
     Raid Level : raid5
     Array Size : 1465151808 (1397.28 GiB 1500.32 GB)
  Used Dev Size : 488383936 (465.76 GiB 500.11 GB)
   Raid Devices : 4
  Total Devices : 4
Preferred Minor : 0
    Persistence : Superblock is persistent
 
    Update Time : Tue Jan  6 16:53:27 2009
          State : clean
 Active Devices : 4
Working Devices : 4
 Failed Devices : 0
  Spare Devices : 0
 
         Layout : left-symmetric
     Chunk Size : 64K
 
           UUID : 4aae8544:7d495590:8e060516:7bc5c8ed (local to host Stark Industry)
         Events : 0.8
 
    Number   Major   Minor   RaidDevice State
       0       8       17        0      active sync   /dev/sdb1
       1       8       33        1      active sync   /dev/sdc1
       2       8       49        2      active sync   /dev/sdd1
       3       8       65        3      active sync   /dev/sde1

root@Stark Industry:~/Bureau# e2fsck -f -n /dev/md0
e2fsck 1.41.3 (12-Oct-2008)
e2fsck: Superbloc invalide, tentons d'utiliser les blocs de sauvetage...
le superbloc a un journal ext3 invalide (i-noeud 8).
Effacer ? non
 
e2fsck: Illegal inode number lors de la vérification du journal ext3 pour /dev/md0

Jan  6 17:45:37 Stark Industry kernel: [  583.306703] VFS: Can't find ext3 filesystem on dev md0.

Storage:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdb1[0] sdc1[3] sdd1[2] sda1[1]
      1465151808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
 
unused devices: <none>

errupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
PCI: Bridge: 0000:00:09.0
  IO window: disabled.
  MEM window: f0000000-f00fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: a000-afff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: 9000-9fff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: 8000-8fff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
  IO window: disabled.
  MEM window: e8000000-efffffff
  PREFETCH window: e0000000-e7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64

Storage:~# fdisk -l /dev/sda
 
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       60801   488384001   fd  Linux raid autodetect

Storage:~# fdisk -l /dev/sdb
 
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       60801   488384001   fd  Linux raid autodetect

Storage:~# fdisk -l /dev/sdc
 
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1       60801   488384001   fd  Linux raid autodetect

Storage:~# fdisk -l /dev/sdd
 
Disk /dev/sdd: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1               1       60801   488384001   fd  Linux raid autodetect

Storage:~# fdisk -l /dev/md0
 
Disk /dev/md0: 1500.3 GB, 1500315451392 bytes
2 heads, 4 sectors/track, 366287952 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
 
Disk /dev/md0 doesn't contain a valid partition table

TestDisk 6.5, Data Recovery Utility, October 2006
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
 
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
     Partition               Start        End    Size in sectors
* Linux RAID               0   1  1 60800 254 63  976768002 [md0]
 
 
Structure: Ok.  Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable  P=Primary  L=Logical  E=Extended  D=Deleted
Keys A: add partition, L: load backup, T: change type,
     Enter: to continue
Raid 5: devices (8,17) (8,1) (8,49)* (8,33), 500 GB / 465 GiB

Wed Jan 14 19:43:02 2009
Command line: TestDisk
 
TestDisk 6.5, Data Recovery Utility, October 2006
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Linux version (ext2fs lib: 1.40-WIP, ntfs lib: avaible, reiserfs lib: none)
Using locale 'fr_FR.UTF-8'.
Hard disk list
Disk /dev/hda - 20 GB / 19 GiB - CHS 40395 16 63, sector size=512
Disk /dev/sda - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
Disk /dev/sdc - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
 
Disk /dev/sdd - 500 GB / 465 GiB
Partition table type: Intel
 
Analyse Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
Geometry from i386 MBR: head=255 sector=63
 
Raid magic value at 0/1/1
Raid apparent size: 976767872 sectors
Raid chunk size: 65536 bytes
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Current partition structure:
 1 P Linux RAID               0   1  1 60800 254 63  976768002 [md0]
No partition is bootable
 
search_part()
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
 
recover_EXT2: s_block_group_nr=0/11178, s_mnt_count=14/21, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 366287952
recover_EXT2: part_size 2930303616
   D Linux                    0   1  1 182402 246 51 2930303616
     EXT3 Large file Sparse superblock, 1500 GB / 1397 GiB
This partition ends after the disk limits. (start=63, size=2930303616, end=2930303678, disk end=976768065)
 
Raid magic value at 60800/252/60
Raid apparent size: 976767872 sectors
Raid chunk size: 65536 bytes
   D Linux RAID               0   1  1 60800 254 61  976768000 [md0]
     Raid 5: devices (8,17) (8,1) (8,49)* (8,33), 500 GB / 465 GiB
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63

TestDisk 6.5, Data Recovery Utility, October 2006
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
 
Disk /dev/md0 - 1500 GB / 1397 GiB - CHS 366287952 2 4
Analyse cylinder 43199371/366287951: 11%
 
 
  Linux                23794   0  1 366311745   1  4 2930303616
  Linux                24007   0  1 366311958   1  4 2930303616
  Linux                24180   0  1 366312131   1  4 2930303616
  Linux                24315   0  1 366312266   1  4 2930303616
  Linux                24331   0  1 366312282   1  4 2930303616
  Linux                24412   0  1 366312363   1  4 2930303616
  HFS                  2313850   0  1 3852154951   0  2  733957738 [^Fm×^FPóò~Ky^OQ~@
  Linux Swap           3201236   0  1 3590801   1  4    3116528
  empty                9876086   1  1 114734326   1  1  838865920 [^B]
  empty                9876100   1  1 114734340   1  1  838865920 [^B]
  HFS                  10702599   1  1 35874727   1  3  201377027 [^A]
  HFS                  36429941   1  1 3337064280   1  2  635270938
  HFS                  39723525   1  1 1746908890   1  2  772581034 [ïÛ~V®~^&Ìë@^K~]
  HFS                  40493940   0  1 443147123   1  4 3221225472
  Stop

TestDisk 6.5, Data Recovery Utility, October 2006
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
 
Disk /dev/md0 - 1500 GB / 1397 GiB - CHS 366287952 2 4
Analyse cylinder 52581554/366287951: 14%
 
 
Warning: Incorrect number of sectors per track 18 (FAT) != 4 (HD)
  FAT12                50582546   0  1 50582905   1  4       2880
check_FAT: Unusual media descriptor (0xf0!=0xf8)
Warning: Incorrect number of sectors per track 18 (FAT) != 4 (HD)
  FAT12                50583292   0  1 50583651   1  4       2880 [NICDD_130]
check_FAT: Unusual media descriptor (0xf0!=0xf8)
Warning: Incorrect number of sectors per track 18 (FAT) != 4 (HD)
  FAT12                50584718   1  1 50585078   0  4       2880 [ISATR]
check_FAT: Unusual media descriptor (0xf0!=0xf8)
Warning: Incorrect number of sectors per track 18 (FAT) != 4 (HD)
  FAT12                50585430   1  1 50585790   0  4       2880 [ISATR]
check_FAT: Unusual media descriptor (0xf0!=0xf8)
Warning: Incorrect number of sectors per track 18 (FAT) != 4 (HD)
  FAT12                50586174   1  1 50586534   0  4       2880 [ISATR]

Storage:~# dumpe2fs /dev/md0 | grep superblock
dumpe2fs 1.40-WIP (14-Nov-2006)
dumpe2fs: Bad magic number in super-block lors de la tentative d'ouverture de /dev/md0

Storage:~# LANG=C dumpe2fs /dev/md0 | grep superblock
dumpe2fs 1.40-WIP (14-Nov-2006)
dumpe2fs: Bad magic number in super-block while trying to open /dev/md0
Couldn't find valid filesystem superblock.

TestDisk 6.5, Data Recovery Utility, October 2006
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
 
Disk /dev/md0 - 1500 GB / 1397 GiB - CHS 366287952 2 4
 
The harddisk (1500 GB / 1397 GiB) seems too small! (< 15921000 TB / 14480065 TiB)
Check the harddisk size: HD jumpers settings, BIOS detection...
 
The following partitions can't be recovered:
     Partition               Start        End    Size in sectors
D Linux                   32   0  1 366287983   1  4 2930303616
D Linux                 9752   0  1 366297703   1  4 2930303616
D Linux                12125   0  1 366300076   1  4 2930303616
D Linux                12154   0  1 366300105   1  4 2930303616
D Linux                18693   0  1 366306644   1  4 2930303616
D Linux                18724   0  1 366306675   1  4 2930303616
D Linux                18756   0  1 366305948   1  4 2930297544
D Linux                18833   0  1 366306784   1  4 2930303616
D Linux                18908   0  1 366306859   1  4 2930303616
D Linux                19019   0  1 366306970   1  4 2930303616
 
[ Continue ]
 
EXT3 Large file Sparse superblock, 1500 GB / 1397 GiB

Storage:~# head /dev/md0
ÀÀÀ@ÀÀÀ@ÁÁÁ@ÁÁÁ@ÂÂÂ@ÂÂÂ@ÃÃÃ@ÃÃÃ@ÄÄÄ@ÄÄÄ@ÅÅÅ@ÅÅÅ@ÆÆÆ@ÆÆÆ@ÇÇÇ@ÇÇÇ@ÈÈÈ@ÈÈÈ@ÉÉÉ@ÉÉÉ@ÊÊÊ@ÊÊÊ@ËËË@ËËË@ÌÌÌ@ÌÌÌú?ÍÍÍ@ÍÍÍþ?ÎÎÎ@ÎÎÎ@ÏÏÏ@ÏÏÏþ?ÐÐÐ@ÐÐÐx@ÑÑÑ@@ÑÑÑ@ÒÒÒO@ÒÒÒv@ÓÓÓ§@ÓÓÓû?ÔÔÔ@ÔÔÔÅ@ÕÕÕ
@ååå@æææ@æææ@ççç@ççç@èèè@èèè@ééé@ééé@êêê@êêê@ëëë@ëëë@ììì«tþ?ìììþ}@íííþ}@íííþ}@îîîþ}@îîîþ}@ïïïþ}@ïïïþ}@ðððþ}@ðððþ}@ñññþ}@ñññþ}@òòòþ}@òòòþ}@óóóþ}@óóóþ}@ôôôþ}@ôôôþ}@õõõþ}@õõõþ}@öööþ}@öööþ}@÷÷÷þ}@÷÷÷þ}@øøøþ}@øøøþ}@ùùùþ}@ùùùþ}@úúúþ}@úúúþ}@ûûûþ}@ûûûþ}@üüüþ}@üüüþ}@ýýýþ}@ýýýþ}@þþþþ}@þþþþ}@ÿÿÿþ}@ÿÿÿþ}@þ}@þeþ?@@@@@@@@þ}@þ}@þ}@þ}@þ}@þ}@þ}@                        þ}@                     þ}@
 
 
þ}@
 
 
þ}@
 
 
   þ}@
 
 
      þ}@
þ}@
þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@}@}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@   þ}@   þ}@!!!þ}@!!!þ}@"""þ}@"""þ}@###þ}@###þ}@$$$þ}@$$$ü}ÿ?%%%þ}@%%%þ}@&&&þ}@&&&þ}@'''þ}@'''þ}@(((þ}@(((þ}@)))þ}@)))þ}@***þ}@***þ}@+++þ}@+++þ}@,,,þ}@,,,þ}@---þ}@---þ}@...þ}@...þ}@///þ}@///þ}@000þ}@000þ}@111þ}@111þ}@222þ}@222þ}@333þ}@333þ}@444þ}@444þ}@555þ}@555þ}@666þ}@666þ}@777þ}@777þ}@888þ}@888þ}@999þ}@999þ}@:::þ}@:::þ}@;;;þ}@;;;þ}@<<<þ}@<<<þ}@===þ}@===þ}@>>>þ}@>>>þ}@???þ}@???þ}@PuTTYPuTTYPuTTYPuTTYPuTTYPuTTY@@@þ}@@@@þ}@AAAþ}@AAAþ}@BBBþ}@BBBþ}@CCCþ}@CCCþ}@DDDþ}@DDDþ}@EEEþ}@
                                                                                                                       E
                                                                                                                        E
                                                                                                                         Eýy@FFFþ}@FFFþ}@GGGþ}@GGGþ}@HHHþ}@HHHþ}@IIIþ}@IIIþ}@JJJþ}@JJJþ}@KKKþ}@KKKþ}@LLLþ}@LLLþ}@MMMþ}@MMMþ}@NNNþ}@NNNþ}@OOOþ}@OOOþ}@PPPþ}@PPPþ}@QQQþ}@QQQþ}@RRRþ}@RRRþ}@SSSþ}@SSSþ}@TTTþ}@TTTþ}@UUUþ}@UUUþ}@VVVþ}@VVVþ}@WWWþ}@WWWþ}@XXXþ}@XXXþ}@YYYþ}@YYYþ}@ZZZþ}@ZZZþ}@[[[þ}@[[[þ}@\\\þ}@\\\þ}@]]]þ}@]]]þ}@^^^þ}@^^^þ}@___þ}@___þ}@```þ}@```þ}@aaaþ}@aaaþ}@bbbþ}@bbbþ}@cccþ}@cccþ}@dddþ}@dddþ}@eeeþ}@eeeþ}@fffþ}@fffþ}@gggþ}@gggþ}@hhhþ}@hhhþ}@iiiþ}@iiiþ}@jjjþ}@jjjþ}@kkkþ}@kkkþ}@lllþ}@lllþ}@mmmþ}@mmmþ}@nnnþ}@nnnþ}@oooþ}@oooþ}@pppþ}@pppþ}@qqqþ}@qqqþ}@rrrþ}@rrrþ}@sssþ}@sssþ}@tttþ}@tttþ}@uuuþ}@uuuþ}@vvvþ}@vvvþ}@wwwþ}@wwwþ}@xxxþ}@xxxþ}@yyyþ}@yyyþ}@zzzþ}@zzzþ}@{{{þ}@{{{þ}@|||þ}@|||þ}@}}}þ}@}}}þ}@~~~þ}@~~~þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@
 
 
                                                þ}@
 
 
                                                þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@}@}@þ}@þ}@þ}@þ}@           þ}@              þ}@
 
þ}@                                          þ}@
þ}@
Storage:~# PuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTY
þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@þ}@

Storage:~# mkdir /mnt/md0
Storage:~# for i in 0 32768 98304 163840 229376 294912 819200 884736 1605632 2654208 4096000 7962624 11239424 20480000 23887872 71663616 78675968 10240000
> do
> mount /dev/md0 -t ext3 -o ro,sb=$i /mnt/md0
> done
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
 
mount: wrong fs type, bad option, bad superblock on /dev/md0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so