# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
 
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software" ),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
 
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
 
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection
 
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
 
# This loads the DBE extension module.
 
    Load        "dbe"   # Double buffer extension
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
 
# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"
 
# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a
 
EndSection
 
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
 
Section "Files"
 
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db" ).  There is normally
# no need to change the default.
 
    RgbPath "/usr/X11R6/lib/X11/rgb"
 
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
 
#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
 
# The module search path.  The default path is shown here.
 
#    ModulePath "/usr/X11R6/lib/modules"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
# Uncomment this to cause a core dump at the spot where a signal is  
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
 
#    Option "NoTrapSignals"
 
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
 
#    Option "DontZap"
 
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.
 
#    Option "Dont Zoom"
 
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
 
#    Option "DisableVidModeExtension"
 
# Uncomment this to enable the use of a non-local xvidtune client.
 
#    Option "AllowNonLocalXvidtune"
 
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.  
 
#    Option "DisableModInDev"
 
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
 
#    Option "AllowNonLocalModInDev"
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier "Keyboard1"
    Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard" ).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
 
#    Option "Protocol"   "Xqueue"
 
    Option "AutoRepeat" "500 30"
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"
 
#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"
 
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"
 
# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
 
#    Option "XkbDisable"
 
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "fr"
 
EndSection
 
 
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
# Identifier and driver
 
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/psaux"
 
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
 
#    Option "Protocol"   "Xqueue"
 
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
 
#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"
 
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
 
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
 
# ChordMiddle is an option for some 3-button Logitech mice
 
#    Option "ChordMiddle"
 
EndSection
 
 
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 57.0
    VertRefresh 50 - 70
EndSection
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
# Any number of graphics device sections may be present
 
# Standard VGA Device:
 
Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
 
# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
 
#    Chipset     "generic"
 
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
 
    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.
 
#    BusID       "PCI:0:10:0"
 
#    VideoRam    256
 
#    Clocks      25.2 28.3
 
EndSection
 
# === ATI device section ===
 
Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === Fire GL DDX driver module specific settings ===
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000"  
    Option "Display2"                   "0"
    Option "HSync2"                     "unspecified"  
    Option "VRefresh2"                  "unspecified"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
    BusID "PCI:1:0:0"    # vendor=1002, device=4966
    Screen 0
EndSection
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"
 
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection
 
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
 
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
 
Section "ServerLayout"
 
# The Identifier line must be present
    Identifier  "Server Layout"
 
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
 
    Screen "Screen0"
 
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
 
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
 
EndSection
 
### EOF ###