Citation :
libata version 1.10 loaded.
ata_piix version 1.03
ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 10
ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 10
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:207f
ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: ST3160023AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
[...]
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
ata1: command 0x25 timeout, stat 0x50 host_stat 0x24
|
