yugo | Ben j'ai pas l'impression qu'il y ai un quelconque mystère dans ma machine:
Code :
- root@seldon /home/rik# lspci
- 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
- 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
- 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
- 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
- 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
- 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
- 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
- 0000:00:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
- 0000:00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
- 0000:00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
- 0000:00:0c.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
- 0000:00:0c.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
- 0000:00:0c.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
- 0000:00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
- 0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
|
Et le dmesg:
Code :
- root@seldon /home/rik# dmesg
- Linux version 2.6.8.1 (root@seldon) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #2 Sat Oct 30 14:47:49
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
- BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
- BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
- BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- 511MB LOWMEM available.
- On node 0 totalpages: 131056
- DMA zone: 4096 pages, LIFO batch:1
- Normal zone: 126960 pages, LIFO batch:16
- HighMem zone: 0 pages, LIFO batch:1
- DMI 2.2 present.
- ACPI: RSDP (v000 VIA694 ) @ 0x000f6db0
- ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
- ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
- ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
- ACPI: PM-Timer IO Port: 0x4008
- Built 1 zonelists
- Kernel command line: BOOT_IMAGE=Debian_2.6.8.1 ro root=302 devfs=nomount
- Local APIC disabled by BIOS -- reenabling.
- Found and enabled local APIC!
- Initializing CPU#0
- PID hash table entries: 2048 (order 11: 16384 bytes)
- Detected 1463.461 MHz processor.
- Using pmtmr for high-res timesource
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 515988k/524224k available (1510k kernel code, 7472k reserved, 713k data, 144k init, 0k hi
- Checking if this processor honours the WP bit even in supervisor mode... Ok.
- Calibrating delay loop... 2899.96 BogoMIPS
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
- CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
- CPU: L1 I cache: 16K, L1 D cache: 16K
- CPU: L2 cache: 256K
- CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#0.
- CPU: Intel(R) Celeron(TM) CPU 1100MHz stepping 01
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Checking 'hlt' instruction... OK.
- enabled ExtINT on CPU#0
- ESR value before enabling vector: 00000000
- ESR value after enabling vector: 00000000
- Using local APIC timer interrupts.
- calibrating APIC timer ...
- ..... CPU clock speed is 1462.0781 MHz.
- ..... host bus clock speed is 132.0980 MHz.
- NET: Registered protocol family 16
- PCI: PCI BIOS revision 2.10 entry at 0xfb390, last bus=1
- PCI: Using configuration type 1
- mtrr: v2.0 (20020519)
- ACPI: Subsystem revision 20040326
- ACPI: IRQ11 SCI: Level Trigger.
- ACPI: Interpreter enabled
- ACPI: Using PIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (00:00)
- PCI: Probing PCI hardware (bus 00)
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
- Linux Plug and Play Support v0.97 (c) Adam Belay
- PnPBIOS: Scanning system for PnP BIOS support...
- PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe70
- PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbea0, dseg 0xf0000
- PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
- PCI: Using ACPI for IRQ routing
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
- ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
- ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
- ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
- ACPI: PCI interrupt 0000:00:0c.1[B] -> GSI 11 (level, low) -> IRQ 11
- ACPI: PCI interrupt 0000:00:0c.2[C] -> GSI 5 (level, low) -> IRQ 5
- ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
- ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
- vesafb: probe of vesafb0 failed with error -6
- Machine check exception polling timer started.
- Initializing Cryptographic API
- PCI: Disabling Via external APIC routing
- PCI: Via IRQ fixup for 0000:00:07.2, from 9 to 10
- PCI: Via IRQ fixup for 0000:00:07.3, from 9 to 10
- PCI: Via IRQ fixup for 0000:00:0c.0, from 9 to 10
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Linux agpgart interface v0.100 (c) Dave Jones
- RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- hda: IC35L090AVV207-0, ATA DISK drive
- hdb: ST340014A, ATA DISK drive
- hdc: SAMSUNG CD-R/RW DRIVE SW-224B, ATAPI CD/DVD-ROM drive
- Using anticipatory io scheduler
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- ide1 at 0x170-0x177,0x376 on irq 15
- hda: max request size: 1024KiB
- hda: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63
- hda: hda1 hda2 hda3 hda4
- hdb: max request size: 1024KiB
- hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63
- hdb: hdb1 hdb2 hdb3
- mice: PS/2 mouse device common for all mice
- serio: i8042 AUX port at 0x60,0x64 irq 12
- input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
- serio: i8042 KBD port at 0x60,0x64 irq 1
- input: AT Translated Set 2 keyboard on isa0060/serio0
- NET: Registered protocol family 2
- IP: routing cache hash table of 4096 buckets, 32Kbytes
- TCP: Hash tables configured (established 32768 bind 65536)
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- ACPI: (supports S0 S3 S4 S5)
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- VFS: Mounted root (ext3 filesystem) readonly.
- Freeing unused kernel memory: 144k freed
- spurious 8259A interrupt: IRQ7.
- Adding 1951888k swap on /dev/hdb2. Priority:-1 extents:1
- EXT3 FS on hda2, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on hda3, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on hdb3, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Real Time Clock Driver v1.12
- inserting floppy driver for 2.6.8.1
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a post-1991 82077
- Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
- ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- parport0: PC-style at 0x378 [PCSPP(,...)]
- parport_pc: Via 686A parallel port: io=0x378
- agpgart: Detected VIA Apollo Pro 133 chipset
- agpgart: Maximum main memory to use for agp memory: 439M
- agpgart: AGP aperture is 128M @ 0xd0000000
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- USB Universal Host Controller Interface driver v2.2
- ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
- uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
- uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
- uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
- uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
- uhci_hcd 0000:00:07.3: irq 10, io base 0000d800
- uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
- uhci_hcd 0000:00:0c.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
- uhci_hcd 0000:00:0c.0: irq 10, io base 0000e400
- uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 3
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- ACPI: PCI interrupt 0000:00:0c.1[B] -> GSI 11 (level, low) -> IRQ 11
- uhci_hcd 0000:00:0c.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
- uhci_hcd 0000:00:0c.1: irq 11, io base 0000e800
- uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 4
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- usb 1-1: new full speed USB device using address 2
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- ieee1394: Initialized config rom entry `ip1394'
- ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
- ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
- usb 1-1.2: new full speed USB device using address 3
- ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[e3006000-e30067ff] Max Packet=[2048]
- usb 4-1: new full speed USB device using address 2
- SCSI subsystem initialized
- Initializing USB Mass Storage driver...
- scsi0 : SCSI emulation for USB Mass Storage devices
- Vendor: Model: USB DRIVE Rev: 2.00
- Type: Direct-Access ANSI SCSI revision: 02
- USB Mass Storage device found at 3
- usbcore: registered new driver usb-storage
- USB Mass Storage support registered.
- SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
- sda: assuming Write Enabled
- sda: assuming drive cache: write through
- sda: sda1
- Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
- ieee1394: Host added: ID:BUS[0-00:1023] GUID[070050c500011afb]
- ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
- ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
- ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI interrupt 0000:00:0c.2[C] -> GSI 5 (level, low) -> IRQ 5
- ehci_hcd 0000:00:0c.2: VIA Technologies, Inc. USB 2.0
- ehci_hcd 0000:00:0c.2: irq 5, pci mem e0a68000
- ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 5
- ehci_hcd 0000:00:0c.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 4 ports detected
- usb 4-1: USB disconnect, address 2
- 8139too Fast Ethernet driver 0.9.27
- ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
- eth1: RealTek RTL8139 at 0xec00, 00:50:fc:24:d9:0d, IRQ 11
- eth1: Identified 8139 chip type 'RTL-8139C'
- usb 4-1: new full speed USB device using address 3
|
J'ai vraiment plus d'idée |