Carte tv ! image mis le son ???

Recherche :

Mot : Pseudo : Filtrer
Bas de page
Auteur	Sujet : Carte tv ! image mis le son ???

slapps

bonjour !:hello:
Je possède une carte tv hauppauge de base ! une primo je crois !

Je viens d'installer tvtime ur ma slack, tout marche niquel à part le son !j'ai rien .....

J'ai regardé le mixer (kmixer, aumixer, alsamixer) j'ai remis tout à fond ! mais rien !

qql'un aurait une ctite idée?

Merci d'avance Slapps :hello:

Publicité

mirtouf

Light is right !

Pas de chip son ?
Et avec un autre soft ?

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

ps : mon ptit cable entre la carte tuner et la carte son sont bien brnaché

slapps

comment ça pas de chip son ??

Et malheureusement tout les autre logiciel je n'ai pas réussi à les installer, il ne passait pas

mirtouf

Light is right !

dmesg | grep bttv

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

j'obtient cela et je ne trouve rien pour le son :
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 10de:01e0 (nVidia Corporation)
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:0a.0, irq: 11, latency: 32, mmio: 0xd400000 0
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13 eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=44346, tuner=Philips FI1216MF MK2 (3), r adio=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL can sleep, using XTAL (28636363).

mirtouf

Light is right !

t'as un chip son que t'as pas configuré.

Ajouter au modules.conf :
pre-install bttv modprobe -k tuner; modprobe -k msp3400

puis rmmod bttv tuner
modprobe bttv msp4300

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

d'accord je fais ça de suite !!

En tout cas merci de répondre aussi vite !!! c'est prèsuqe de l'instantané !

slapps

Alros j'ai fai ce que tu m'as dit !

j'ai édité modules.conf

Ensuite j'ai tapé rmmod bttv tuner
puis modprobe bttv msp4300

et j'ai obtenu : Note: /etc/modules.conf is more recent than /lib/modules/2.4.22/modules.dep

je ne sias pas si c bon ou pas

Ensuite j'ai redémarré tvtime ! et 'jai toujours pas de son !!!

J'vais tester une chose je vias défraire la tête de ma carte son " live platinium "

et je redemarre !

mirtouf

Light is right !

update-modules ?
Y'a pas eu d'erreur au modprobe ?

options msp3400 (once=1 simple=1)#je sais plus si c'est 2 options servent# mixer=1

Message édité par mirtouf le 22-11-2003 à 15:40:40

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

Publicité

slapps

ben j'ai toujours pas de son

j'ai tapé : modprobe bttv msp4300 once=1 simple=1 mixer=1

J'suis sur qu'il y a un truc tout con que j'ai oublié qql part ! mais quoi !!

mirtouf

Light is right !

envoie les lignes du modules.conf relatives à la carte Tv et donne le résultat d'un
dmesg | grep bttv

et puis modinfo msp3400

Message édité par mirtouf le 22-11-2003 à 15:52:56

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

au niveau de la carte tuner j'ai juste cela ds mon module.conf

pre-install bttv modprobe -k tuner; modprobe -k msp3400

sinon j'ai des ligens pour la carte son et mes drivers nvidia c tout ..... il ne manque donc pas des trucs ds mon modules.conf ?

voici pour le dmesg | grep bttv

bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 10de:01e0 (nVidia Corporation)
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:0a.0, irq: 11, latency: 32, mmio: 0xd4000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=44346, tuner=Philips FI1216MF MK2 (3), radio=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: unloading
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 10de:01e0 (nVidia Corporation)
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:0a.0, irq: 11, latency: 32, mmio: 0xd4000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=44346, tuner=Philips FI1216MF MK2 (3), radio=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0*

voilou!

mirtouf

Light is right !

T'as le support btaudio ?

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

je peux vérifier ou que j'ai le support audio ???

car ds la config du kernel ds videolinux j'ai tout !

mirtouf

Light is right !

have fun

tvmixer.o
registers a mixer device for the TV card's volume/bass/treble
controls (requires a i2c audio control chip like the msp3400).

insmod args:
debug=1 print some debug info to the syslog.
devnr=n allocate device #n (0 == /dev/mixer,
1 = /dev/mixer1, ...), default is to
use the first free one.

tvaudio.o
new, experimental module which is supported to provide a single
driver for all simple i2c audio control chips (tda/tea*).

insmod args:
tda8425 = 1 enable/disable the support for the
tda9840 = 1 various chips.
tda9850 = 1 The tea6300 can't be autodetected and is
tda9855 = 1 therefore off by default, if you have
tda9873 = 1 this one on your card (STB uses these)
tda9874a = 1 you have to enable it explicitly.
tea6300 = 0 The two tda985x chips use the same i2c
tea6420 = 1 address and can't be disturgished from
pic16c54 = 1 each other, you might have to disable
the wrong one.
debug = 1 print debug messages

insmod args for tda9874a:
tda9874a_SIF=1/2 select sound IF input pin (1 or 2)
(default is pin 1)
tda9874a_AMSEL=0/1 auto-mute select for NICAM (default=0)
Please read note 3 below!
tda9874a_STD=n select TV sound standard (0..8):
0 - A2, B/G
1 - A2, M (Korea)
2 - A2, D/K (1)
3 - A2, D/K (2)
4 - A2, D/K (3)
5 - NICAM, I
6 - NICAM, B/G
7 - NICAM, D/K (default)
8 - NICAM, L

Note 1: tda9874a supports both tda9874h (old) and tda9874a (new) chips.
Note 2: tda9874h/a and tda9875 (which is supported separately by
tda9875.o) use the same i2c address so both modules should not be
used at the same time.
Note 3: Using tda9874a_AMSEL option depends on your TV card design!
AMSEL=0: auto-mute will switch between NICAM sound
and the sound on 1st carrier (i.e. FM mono or AM).
AMSEL=1: auto-mute will switch between NICAM sound
and the analog mono input (MONOIN pin).
If tda9874a decoder on your card has MONOIN pin not connected, then
use only tda9874_AMSEL=0 or don't specify this option at all.
For example:
card=65 (FlyVideo 2000S) - set AMSEL=1 or AMSEL=0
card=72 (Prolink PV-BT878P rev.9B) - set AMSEL=0 only

msp3400.o
The driver for the msp34xx sound processor chips. If you have a
stereo card, you probably want to insmod this one.

insmod args:
debug=1/2 print some debug info to the syslog,
2 is more verbose.
simple=1 Use the "short programming" method. Newer
msp34xx versions support this. You need this
for dbx stereo. Default is on if supported by
the chip.
once=1 Don't check the TV-stations Audio mode
every few seconds, but only once after
channel switches.
amsound=1 Audio carrier is AM/NICAM at 6.5 Mhz. This
should improve things for french people, the
carrier autoscan seems to work with FM only...

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

mirtouf

Light is right !

A priori, à rajouter

options tvmixer devnr=0
options msp3400 once=1 amsound=1

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

oki mirtouf je viens de rajouté ce que tu m'as dit et cela ne marche toujours pas !

Mais j'aurais voulu avoir des info précise qd tu dis rajouter ! car en fait mon fichier modules.conf à cet tête :

<table width="90%" border="0" class="code">alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-card-emu10k1
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias char-major-195 nvidia
alias char-major-195 NVdriver
pre-install bttv modprobe -k tuner; modprobe -k msp3400
options tvmixer devnr=0
options msp3400 once=1 amsound=1</table>

Et j'aurais voulu savoir, si il ne faut peut-être pas rajouter alias devant ???

Sinon quel commande je dsoi utiliser pour réinitialiser la prise ne compte de modules.conf sans rebooter

Enfin d'après http://lea-linux.org/hardware/tv.php3#son_pasdechance

il faut que j'install des drivers son pour ma carte tuner !

le prob c que qd je compiles les bttv-0.9.11, j'obtiens cette erreur :

<table width="90%" border="0" class="code">

gcc -I. -D__KERNEL__ -I/usr/src/linux-2.4.22/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i486 -DMODULE -nostdinc -iwithprefix include -DKBUILD_BASENAME=video_buf -DEXPORT_SYMTAB -c video-buf.c
In file included from video-buf.c:36:
video-buf.h:137: error: field `field' has incomplete type
video-buf.h:159: warning: parameter has incomplete type
video-buf.h:169: error: field `type' has incomplete type
video-buf.h:171: error: field `field' has incomplete type
video-buf.h:172: error: field `last' has incomplete type
video-buf.h:195: warning: parameter has incomplete type
video-buf.h:195: warning: parameter has incomplete type
video-buf.h:201: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.h:201: warning: its scope is only this definition or declaration, which is probably not what you want
video-buf.h:201: warning: parameter has incomplete type
video-buf.h:203: warning: `struct v4l2_requestbuffers' declared inside parameter list
video-buf.h:204: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.h:206: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.h:208: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.c:351: error: parameter `type' has incomplete type
video-buf.c:351: error: parameter `field' has incomplete type
video-buf.c:432: error: return type is an incomplete type
video-buf.c:432: error: conflicting types for `videobuf_next_field'
video-buf.h:199: error: previous declaration of `videobuf_next_field'
video-buf.c: In function `videobuf_next_field':
video-buf.c:433: error: variable `field' has initializer but incomplete type
video-buf.c:433: error: storage size of `field' isn't known
video-buf.c:435: error: `V4L2_FIELD_ANY' undeclared (first use in this function)
video-buf.c:435: error: (Each undeclared identifier is reported only once
video-buf.c:435: error: for each function it appears in.)
video-buf.c:437: error: `V4L2_FIELD_ALTERNATE' undeclared (first use in this function)
video-buf.c:438: error: `V4L2_FIELD_TOP' undeclared (first use in this function)
video-buf.c:439: error: `V4L2_FIELD_BOTTOM' undeclared (first use in this function)
video-buf.c:446: warning: `return' with a value, in function returning void
video-buf.c:433: warning: unused variable `field'
video-buf.c: At top level:
video-buf.c:451: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.c:452: error: parameter `type' has incomplete type
video-buf.c:452: error: conflicting types for `videobuf_status'
video-buf.h:201: error: previous declaration of `videobuf_status'
video-buf.c: In function `videobuf_status':
video-buf.c:453: error: dereferencing pointer to incomplete type
video-buf.c:454: error: dereferencing pointer to incomplete type
video-buf.c:455: error: dereferencing pointer to incomplete type
video-buf.c:456: error: dereferencing pointer to incomplete type
video-buf.c:457: error: dereferencing pointer to incomplete type
video-buf.c:459: error: dereferencing pointer to incomplete type
video-buf.c:459: error: `V4L2_BUF_FLAG_MAPPED' undeclared (first use in this function)
video-buf.c:464: error: dereferencing pointer to incomplete type
video-buf.c:464: error: `V4L2_BUF_FLAG_QUEUED' undeclared (first use in this function)
video-buf.c:468: error: dereferencing pointer to incomplete type
video-buf.c:468: error: `V4L2_BUF_FLAG_DONE' undeclared (first use in this function)
video-buf.c:475: error: dereferencing pointer to incomplete type
video-buf.c:476: error: dereferencing pointer to incomplete type
video-buf.c:477: error: dereferencing pointer to incomplete type
video-buf.c:478: error: dereferencing pointer to incomplete type
video-buf.c: At top level:
video-buf.c:483: warning: `struct v4l2_requestbuffers' declared inside parameter list
video-buf.c:484: error: conflicting types for `videobuf_reqbufs'
video-buf.h:203: error: previous declaration of `videobuf_reqbufs'
video-buf.c: In function `videobuf_reqbufs':
video-buf.c:488: error: dereferencing pointer to incomplete type
video-buf.c:490: error: dereferencing pointer to incomplete type
video-buf.c:494: error: dereferencing pointer to incomplete type
video-buf.c:506: error: dereferencing pointer to incomplete type
video-buf.c:507: error: dereferencing pointer to incomplete type
video-buf.c: At top level:
video-buf.c:515: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.c:516: error: conflicting types for `videobuf_querybuf'
video-buf.h:204: error: previous declaration of `videobuf_querybuf'
video-buf.c: In function `videobuf_querybuf':
video-buf.c:517: error: dereferencing pointer to incomplete type
video-buf.c:519: error: dereferencing pointer to incomplete type
video-buf.c:519: error: dereferencing pointer to incomplete type
video-buf.c:521: error: dereferencing pointer to incomplete type
video-buf.c:523: error: dereferencing pointer to incomplete type
video-buf.c:523: warning: passing arg 1 of `videobuf_status' from incompatible pointer type
video-buf.c: At top level:
video-buf.c:529: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.c:530: error: conflicting types for `videobuf_qbuf'
video-buf.h:206: error: previous declaration of `videobuf_qbuf'
video-buf.c: In function `videobuf_qbuf':
video-buf.c:532: error: storage size of `field' isn't known
video-buf.c:541: error: dereferencing pointer to incomplete type
video-buf.c:543: error: dereferencing pointer to incomplete type
video-buf.c:543: error: dereferencing pointer to incomplete type
video-buf.c:545: error: dereferencing pointer to incomplete type
video-buf.c:555: error: type of formal parameter 3 is incomplete
video-buf.c:532: warning: unused variable `field'
video-buf.c: At top level:
video-buf.c:574: warning: `struct v4l2_buffer' declared inside parameter list
video-buf.c:575: error: conflicting types for `videobuf_dqbuf'
video-buf.h:208: error: previous declaration of `videobuf_dqbuf'
video-buf.c: In function `videobuf_dqbuf':
video-buf.c:584: error: dereferencing pointer to incomplete type
video-buf.c:605: error: dereferencing pointer to incomplete type
video-buf.c:605: error: dereferencing pointer to incomplete type
video-buf.c:605: error: dereferencing pointer to incomplete type
video-buf.c:605: error: dereferencing pointer to incomplete type
video-buf.c:605: error: dereferencing pointer to incomplete type
video-buf.c:605: error: dereferencing pointer to incomplete type
video-buf.c:606: warning: passing arg 1 of `videobuf_status' from incompatible pointer type
video-buf.c: In function `videobuf_read_zerocopy':
video-buf.c:661: error: storage size of `field' isn't known
video-buf.c:674: error: type of formal parameter 3 is incomplete
video-buf.c:661: warning: unused variable `field'
video-buf.c: In function `videobuf_read_one':
video-buf.c:702: error: storage size of `field' isn't known
video-buf.c:728: error: type of formal parameter 3 is incomplete
video-buf.c:702: warning: unused variable `field'
video-buf.c: In function `videobuf_read_start':
video-buf.c:776: error: storage size of `field' isn't known
video-buf.c:793: error: type of formal parameter 3 is incomplete
video-buf.c:776: warning: unused variable `field'
make[2]: *** [video-buf.o] Error 1
make[2]: Leaving directory `/home/slash/donwload/logiciel/systeme/drivers/bttv-0.9.11'
make[1]: *** [_mod_/home/slash/donwload/logiciel/systeme/drivers/bttv-0.9.11] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.22'
make: *** [default] Error 2</table>

il me manque des chose ???????? :ouch:

:hello: en tout cas merci de ton aide mirtouf :hello: :love:

slapps

dsl pur les <table width="90%" border="0" class="code"> mais j'voulais faire un cadre comme mirtouf :'(

mirtouf

Light is right !

Reste avec tes drivers en version 0.7.107 ça marche très bien avec.

Les 0.9.x ont une feature spéciale v4l2 inutile pour toi.

pre-install bttv modprobe -k tuner; modprobe -k msp3400
# i2c
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1

# bttv
alias char-major-81 videodev
alias char-major-81-0 bttv
options bttv card=10 radio=1
options tuner type=3

options tvmixer devnr=0
options msp3400 once=1 amsound=1

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

mirtouf

Light is right !

Validation des changements avec rmmod le_module puis modprobe le_module.

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

slapps

oki mirtouf

ben merci bcp !!!!! ça marche !!!!! cool !!!

Un grand merci ! mirtouffffffffffffff !!! de ta patience !!! :love: :love: :bounce: :hello:

bonne soirée --==Slapps==--

mirtouf

Light is right !

Pour de super features :
http://xawdecode.sf.net

---------------
-~- Libérez Datoune ! -~- Camarade, toi aussi rejoins le FLD pour que la flamme de la Révolution ne s'éteigne pas ! -~- A VENDRE

Publicité

FORUM HardWare.fr

Linux et OS Alternatifs

Hardware

Carte tv ! image mis le son ???

Sujets relatifs
carte mère supportant 2Go de RAm	problème carte pcmcia realtek (8139too) qui veut pas marcher sous deb!
Carte réseau du nforce2 et mandrake 9.2	EXT3 et drive image 7
Quelle carte mêre acheter pour AthlonXP?	Le successeur de XFREE en image!
Carte USB et Linux	Apache, flux d'image et RFC HTTP...
configurer une carte son vt8233 sous debian	Carte TV : Image colorée bizarrement..
Plus de sujets relatifs à : Carte tv ! image mis le son ???

Page générée en 0.090 secondes