Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
1253 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  Débats

  [Samba] Partage d'imprimante

 



 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

[Samba] Partage d'imprimante

n°115056
humanfacto​r
Posté le 19-06-2002 à 19:03:04  profilanswer
 

Salut !
 
Je suis sous Debian Woody et je possède une HP OfficeJet G85 que je souhaiterai partager sur l'ensemble des postes dans mon réseau
 
J'ai donc installé hopj puis cups
 
J'arrive à imprimer une page de test depuis le serveur (à partir de l'interface de configuration de CUPS : http://127.0.0.1:631)
 
Ensuite j'ai installé samba
 
Je n'arrive pas à imprimer depuis un client Windows ! il me mets à chaque fois : Accès refusé ! Connexion impossible
 
Voici le fichier smb.conf :
 
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
# $Id: smb.conf,v 1.2.4.6 2002/03/13 18:56:16 peloy Exp $
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which  
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)  
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic  
# errors.  
#
 
#======================= Global Settings =======================
 
[global]
 
 
# Change this for the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP
 
# server string is the equivalent of the NT Description field
   server string = %h server (Samba %v)
 
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes
 
# You may wish to override the location of the printcap file
    printcap name = /etc/printcap    
 
# 'printing = cups' works nicely
   printing = cups
 
   guest account = nobody
   share modes = yes
   #invalid users = root
 
# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m
 
# Put a capping on the size of the log files (in Kb).
   max log size = 1000
 
# If you want Samba to log though syslog only then set the following
# parameter to 'yes'. Please note that logging through syslog in
# Samba is still experimental.
;   syslog only = no
 
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smb,nmb} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0
 
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# security_level.txt for details.
   security = share
 
# You may wish to use password encryption. Please read ENCRYPTION.txt,
# Win95.txt and WinNT.txt in the Samba documentation. Do not enable this
# option unless you have read those documents
   encrypt passwords = yes
 
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
   include = /home/samba/etc/smb.conf.%m
 
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY
 
# --- Browser Control Options ---
 
# Please _read_ BROWSING.txt and set the next four parameters according
# to your network setup. The defaults are specified below (commented
# out.) It's important that you read BROWSING.txt so you don't break
# browsing in your network!
 
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = yes
 
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
   os level = 20
 
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
   domain master = yes
 
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
   preferred master = yes
 
# --- End of Browser Control Options ---
 
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
   wins support = yes
 
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z
 
# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no
 
# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast
 
# Name mangling options
;   preserve case = yes
;   short preserve case = yes
 
# This boolean parameter controlls whether Samba attempts to sync. the Unix
# password with the SMB password when the encrypted SMB password in the
# /etc/samba/smbpasswd file is changed.
;   unix password sync = false
 
# For Unix password sync. to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .
 
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no
 
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
 
   obey pam restrictions = yes
 
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   winbind uid = 10000-20000
;   winbind gid = 10000-20000
;   template shell = /bin/bash
 
#======================= Share Definitions =======================
 
[homes]
   comment = Home Directories
   browseable = no
 
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = no
 
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700
 
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700
 
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no
 
[printers]
   comment = All Printers
   browseable = no
   path = /tmp
   printable = yes
   guest ok = yes
   public = yes
   writable = no
   create mode = 0700
 
   print command = lpr-cups -P %p -o raw %s -r
   lpq command = lpstat -o %p
   lprm command = cancel %d-%j
 
 
# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes
 
# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom
 
 
 
A l'aide !!!!

mood
Publicité
Posté le 19-06-2002 à 19:03:04  profilanswer
 


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  Débats

  [Samba] Partage d'imprimante

 

Sujets relatifs
Install de Samba sous free Bsdserveur samba
Acces internet partagé a partir de linuxPartage de Fichiers Windows XP / Linux
partage de connex avec win 2K comme passerellemontage de partages samba
partage de disque dur xp/linuxImprimante EpsonC40UX, Debian Sid et Cups
Installation imprimante canons630 usb sous Linuxpartage ftp / samba
Plus de sujets relatifs à : [Samba] Partage d'imprimante


Copyright © 1997-2018 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR