Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
959 connectés 

  FORUM HardWare.fr
  Hardware
  Carte mère

  Freeze, reboot et blue screen récurrents sur nouvelle config

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

Freeze, reboot et blue screen récurrents sur nouvelle config

n°10920439
remixrox
Posté le 29-12-2020 à 22:15:17  profilanswer
 

Bonjour à tous,
 
Je suis un peu désespéré avec tous les problèmes que je rencontre suite au montage de ma nouvelle configuration.
Je rencontre systématiquement après quelques minutes de jeu soit un Freeze puis un reboot soit un blue screen puis un reboot. Je vous mets les résultats de WhoCrashed à la suite.
Le problème est présent également dès que je fais un test OCCT basique. Au bout de deux minutes, ça recommence. Les températures sont stables et pas très élevées (60° max), je ne crois pas que ce soit du à ça.
 
Voici ma config. Je vous indique ce que j'ai essayé ensuite.
 
I7 10700KF 3,8Ghz
Noctua NH-U9B
Gigabyte Z490 Gaming X
Corsair Vengeance 16 Go 3600 Mhz (2133 sur ma CM, je n'ai pas activé le profil XMP)
Asus RTX 2070 8 Go OC
SSD M2 Corsair MP510
SSD Samsung 870 1 To
FSP RAIDER S 650W
 
Je tourne sous Windows 10 Pro 2004
Les pilotes sont tous à jour (trop peut-être...)
 
J'ai essayé :
- Réduire le Power Limit dans Easy Tune (utilitaire OC Gigabyte) à 125W puis 65W : IDEM
- Sélectionner les paramètres Default (non OC) dans ce même utilitaire : IDEM
- Réinstaller Windows : IDEM
 
Dans un autre post de ce forum, dans la catégorie Processeur, le problème a déjà été évoqué.
Il était question de la puissance et la qualité de l'alimentation qui faisait peut-être défaut. C'est vrai qu'elle est limite. Mais si je réduis la consommation à 125 Watts (recommandation Intel) puis à 65 Watts (ce que consommais mon ancien i5 6600 sur une config similaire) et que le problème persiste, je n'ai pas l'impression que ça vienne de l'alimentation qui a du mal à délivrer la puissance nécessaire.
 
Sinon c'est peut-être matériel... mais pourquoi ça ne lâcherait que lors d'une certaine utilisation un peu plus poussée (jeux, occt, etc.)
 
Si quelqu'un a déjà rencontré le problème... je suis preneur.
 
Voici le rapport WhoCrashed :
 
System Information (local)
--------------------------------------------------------------------------------
 
Computer name: DESKTOP-CNSDBK3
Windows version: Windows 10, 10.0, version 2004, build: 19041
Windows dir: C:\WINDOWS
Hardware: Z490 GAMING X, Gigabyte Technology Co., Ltd.
CPU: GenuineIntel Intel(R) Core(TM) i7-10700KF CPU @ 3.80GHz 8664, level: 6
16 logical processors, active mask: 65535
RAM: 17096196096 bytes (15,9GB)
 
 
 
 
--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------
 
Crash dumps are enabled on your computer.  
 
Crash dump directories:  
C:\WINDOWS
C:\WINDOWS\Minidump
 
On Tue 29/12/2020 19:28:37 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\122920-7890-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)  
Bugcheck code: 0x1E (0xFFFFFFFFC000001D, 0xFFFFF80519877B7F, 0xFFFFD28DB1319040, 0x1)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.  
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.  
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  
 
 
 
On Tue 29/12/2020 19:28:37 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\MEMORY.DMP
This was probably caused by the following module: ntfs.sys (Ntfs+0x36BF)  
Bugcheck code: 0x1E (0xFFFFFFFFC000001D, 0xFFFFF80519877B7F, 0xFFFFD28DB1319040, 0x1)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\drivers\ntfs.sys
product: Système d’exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote du système de fichiers NT
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.  
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.  
The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK.
 
 
 
On Tue 29/12/2020 18:57:16 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\122920-9281-01.dmp
This was probably caused by the following module: intelppm.sys (0xFFFFF80136FF1397)  
Bugcheck code: 0x7F (0x8, 0xFFFFF80121A7AE70, 0xFFFF000121A5D5B8, 0xFFFFF80136FF1397)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\WINDOWS\system32\drivers\intelppm.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.Double Fault, indicates that an exception occurs during a call to the handler for a prior exception. Most often this is caused by a software problem (kernel stack overflow) but this can also be caused by a hardware problem.  
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.  
 
 
 
On Tue 29/12/2020 18:48:13 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\122920-7796-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)  
Bugcheck code: 0x50 (0xFFFFF8010D000014, 0x3, 0xFFFFF8010CC6D60C, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.  
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  
 
--------------------------------------------------------------------------------
 
 
Merci d'avance !!!

mood
Publicité
Posté le 29-12-2020 à 22:15:17  profilanswer
 


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Hardware
  Carte mère

  Freeze, reboot et blue screen récurrents sur nouvelle config

 

Sujets relatifs
Upgrade config de 2009 (Asus P6T Deluxe V2)nouvelle carte mère pour ryzen 1600x
Ecran noir nouvelle configAvis nouvelle config gaming
Reboot durant test OCCTAvis Config ryzen 7 2700
Conseil config gaming fortnite 120 FPSAvis sur upgrade de config
Plus de sujets relatifs à : Freeze, reboot et blue screen récurrents sur nouvelle config


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR