Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2520 connectés 

  FORUM HardWare.fr
  Hardware
  Matériels & problèmes divers

  nouvelle ram : blue screen

 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

nouvelle ram : blue screen

n°6658352
green_arro​w
Posté le 25-10-2008 à 16:18:13  profilanswer
 

Salut a tous et a toutes,
Hier je me suis acheter un pack de Corsair TWIN2X4096-6400C4DHX (4-4-4-12),
Je commence par l'installer et puis booter l'ordinateur,  je vais voir dans Everest les timings sont 5-5-5-18. :o  
Je vais donc dans le bios pour mettre les timings en manuel et je met 4-4-4-12 avec une tension de 2.1v comme il elle doivent être de base
lien vers les info de la ram : http://www.corsair.com/_datasheets [...] 0C4DHX.pdf
J'ai maintenant plein de Blue Screen, depuis le temps j'ai mit memory enhaced : Normal, mais j'en encore des Blue Screen
Merci de votre aide !   :jap:  
                                                                                                                                                                 Francis

mood
Publicité
Posté le 25-10-2008 à 16:18:13  profilanswer
 

n°6658515
green_arro​w
Posté le 25-10-2008 à 17:31:27  profilanswer
 

Je vien de faire deux tests d'orthose et voila :
 
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15
CPU: 3600MHz FSB: 400MHz [400MHz x 9.0 est.]
2008-10-25 10:04  
Launching 2 threads...
Using CPU #0
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
Torture Test ran 3 minutes 47 seconds - 0 errors, 0 warnings.
Execution halted.
 
Type: Large, in-place FFTs - stress some RAM Min: 128 Max: 1024 InPlace: Yes Mem: 8 Time: 15
CPU: 3600MHz FSB: 400MHz [400MHz x 9.0 est.]
2008-10-25 10:19  
Launching 2 threads...
Using CPU #0
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
Torture Test ran 0 minutes 13 seconds - 0 errors, 0 warnings.
Execution halted.
 
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15
CPU: 3600MHz FSB: 400MHz [400MHz x 9.0 est.]
2008-10-25 10:20  
Launching 2 threads...
Using CPU #0
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
Test 6, 4000 Lucas-Lehmer iterations of M18874367 using 1024K FFT length.
Test 7, 4000 Lucas-Lehmer iterations of M18474367 using 1024K FFT length.
Test 8, 4000 Lucas-Lehmer iterations of M18274367 using 1024K FFT length.
Test 9, 4000 Lucas-Lehmer iterations of M18274369 using 1024K FFT length.
Test 10, 4000 Lucas-Lehmer iterations of M18074369 using 1024K FFT length.
Self-test 1024K passed!
Test 1, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
Test 2, 800000 Lucas-Lehmer iterations of M163839 using 8K FFT length.
Test 3, 800000 Lucas-Lehmer iterations of M159745 using 8K FFT length.
Test 4, 800000 Lucas-Lehmer iterations of M157695 using 8K FFT length.
Test 5, 800000 Lucas-Lehmer iterations of M155649 using 8K FFT length.
Test 6, 800000 Lucas-Lehmer iterations of M153599 using 8K FFT length.
Test 7, 800000 Lucas-Lehmer iterations of M147455 using 8K FFT length.
Test 8, 800000 Lucas-Lehmer iterations of M143361 using 8K FFT length.
Test 9, 800000 Lucas-Lehmer iterations of M141311 using 8K FFT length.
Test 10, 800000 Lucas-Lehmer iterations of M135169 using 8K FFT length.
Test 11, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
Self-test 8K passed!
Test 1, 560000 Lucas-Lehmer iterations of M212991 using 10K FFT length.
Test 2, 560000 Lucas-Lehmer iterations of M210415 using 10K FFT length.
Test 3, 560000 Lucas-Lehmer iterations of M208897 using 10K FFT length.
Test 4, 560000 Lucas-Lehmer iterations of M204799 using 10K FFT length.
Test 5, 560000 Lucas-Lehmer iterations of M200705 using 10K FFT length.
Test 6, 560000 Lucas-Lehmer iterations of M196607 using 10K FFT length.
Test 7, 560000 Lucas-Lehmer iterations of M194561 using 10K FFT length.
Test 8, 560000 Lucas-Lehmer iterations of M188415 using 10K FFT length.
Test 9, 560000 Lucas-Lehmer iterations of M186369 using 10K FFT length.
Test 10, 560000 Lucas-Lehmer iterations of M184319 using 10K FFT length.
Test 11, 800000 Lucas-Lehmer iterations of M172031 using 10K FFT length.
Self-test 10K passed!
Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 47 minutes 47 seconds - 1 errors, 0 warnings.
Execution halted.
 
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15
CPU: 3600MHz FSB: 400MHz [400MHz x 9.0 est.]
2008-10-25 11:31  
Launching 2 threads...
Using CPU #0
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 1 minutes 49 seconds - 1 errors, 0 warnings.
Execution halted.


Message édité par green_arrow le 25-10-2008 à 17:35:33
n°6658538
klimro
Anima Sana In Corpore Sano
Posté le 25-10-2008 à 17:44:46  profilanswer
 

Salut, essaies de faire un memtest pour être définitivement sûr que c'est la ram qui est en cause.

n°6658675
green_arro​w
Posté le 25-10-2008 à 18:38:32  profilanswer
 

Je ne crois pas que c'est la ram qui est en cause, parce que si je ne modifie aucun parametre dans le bios,  
donc je la laisse en 5-5-5-18 et 1.8 V, je n'ai aucun bleue screen, mais ma ram est certifier 4-4-4-12 a 2.1volt,
selon moi je dois faire une mauvaise manipulation via le bios, j'ai déja entendue parler d'augmentation de tension du northbridge,
je sais pas si sa peut aider, mais avant de tenter toute autre modification , j'aimerai avoir les commentaires de
personne ayant deja effectuer des modifications du genre, merci

n°6658700
bidulux
Posté le 25-10-2008 à 18:48:50  profilanswer
 

Je sais pas si ca peut aider
C'est quoi ta config ??

n°6658731
green_arro​w
Posté le 25-10-2008 à 19:04:22  profilanswer
 

--------[ Résumé ]------------------------------------------------------------------------------------------------------
 
    Ordinateur:
      Type de système                                   PC avec processeur x86 ACPI
      Système d'exploitation                            Microsoft Windows Vista Ultimate
      Service Pack du système                           Service Pack 1
      Internet Explorer                                 7.0.6001.18000
      DirectX                                           DirectX 10.0
      Nom du système                                    PC-DE-FRANCIS
      Nom de l'utilisateur                              Francis Chaput
      Domaine de connexion                              PC-de-Francis
      Date / Heure                                      2008-10-25 / 13:03
 
    Carte mère:
      Type de processeur                                DualCore Intel Core 2 Duo E8400, 3600 MHz (9 x 400)
      Nom de la carte mère                              Gigabyte GA-EP45-DS3R  (2 PCI, 3 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, Audio, Dual Gigabit LAN, IEEE-1394)
      Chipset de la carte mère                          Intel Eaglelake P45
      Mémoire système                                   3328 Mo  (DDR2-800 DDR2 SDRAM)
      DIMM1: Corsair XMS2 DHX CM2X2048-6400C4DHX        2 Go DDR2-800 DDR2 SDRAM  (5-5-5-18 @ 400 MHz)  (4-4-4-13 @ 270 MHz)
      DIMM3: Corsair XMS2 DHX CM2X2048-6400C4DHX        2 Go DDR2-800 DDR2 SDRAM  (5-5-5-18 @ 400 MHz)  (4-4-4-13 @ 270 MHz)
      Type de BIOS                                      Award Modular (08/18/08)
      Port de communication                             Port de communication (COM1)
      Port de communication                             Port imprimante (LPT1)
 
    Moniteur:
      Carte vidéo                                       ATI Radeon HD 4800 Series  (512 Mo)
      Carte vidéo                                       ATI Radeon HD 4800 Series  (512 Mo)
      Accélérateur 3D                                   ATI Radeon HD 4850 (RV770)
      Moniteur                                          Samsung SyncMaster 226BW/MagicSyncMaster CX226BW (Digital)  [22" LCD]  (HVCP716263)
 
    Multimédia:
      Carte audio                                       ATI Radeon HDMI @ ATI RV770 - High Definition Audio Controller
      Carte audio                                       Realtek ALC889A @ Intel 82801JB ICH10 - High Definition Audio Controller
 
    Stockage:
      Contrôleur IDE                                    Contrôleur IDE standard double canal PCI
      Contrôleur IDE                                    Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
      Contrôleur IDE                                    Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
      Contrôleur de stockage                            Virtual CloneDrive
      Disque dur                                        ST3500320AS ATA Device  (500 Go, 7200 RPM, SATA-II)
      Disque dur                                        WDC WD3000GLFS-01F8U0 ATA Device  (279 Go, IDE)
      Lecteur optique                                   ELBY CLONEDRIVE SCSI CdRom Device  (Virtual CD-ROM)
      Lecteur optique                                   HL-DT-ST DVDRAM GH20NS15 ATA Device
      État des disques durs SMART                       OK
 
    Partitions:
      C: (NTFS)                                         279.5 Go (240.4 Go libre)
      D: (NTFS)                                         465.8 Go (347.2 Go libre)
      Taille totale                                     745.2 Go (587.5 Go libre)
 
    Entrée:
      Clavier                                           Périphérique clavier PIH
      Souris                                            Souris HID
 
    Réseau:
      Adresse IP principale                             192.168.10.96
      Adresse MAC principale                            00-1D-7D-0D-00-E3
      Carte réseau                                      Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
      Carte réseau                                      Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)  (192.168.10.96)
 
    Périphériques:
      Imprimante                                        Fax
      Imprimante                                        Microsoft Office Document Image Writer
      Imprimante                                        Microsoft XPS Document Writer
      Contrôleur FireWire                               Texas Instruments TSB43AB23 1394A-2000 OHCI PHY/Link-Layer Controller (PHY: TI TSB43AB23)
      Contrôleur USB1                                   Intel 82801JB ICH10 - USB Universal Host Controller
      Contrôleur USB1                                   Intel 82801JB ICH10 - USB Universal Host Controller
      Contrôleur USB1                                   Intel 82801JB ICH10 - USB Universal Host Controller
      Contrôleur USB1                                   Intel 82801JB ICH10 - USB Universal Host Controller
      Contrôleur USB1                                   Intel 82801JB ICH10 - USB Universal Host Controller
      Contrôleur USB1                                   Intel 82801JB ICH10 - USB Universal Host Controller
      Contrôleur USB2                                   Intel 82801JB ICH10 - USB2 Enhanced Host Controller
      Contrôleur USB2                                   Intel 82801JB ICH10 - USB2 Enhanced Host Controller
      Périphérique USB                                  Concentrateur USB générique
      Périphérique USB                                  DeathAdder Mouse
      Périphérique USB                                  Périphérique USB composite
      Périphérique USB                                  Razer Tarantula USB Keyboard
      Périphérique USB                                  Razer Tarantula USB Keyboard
 
    DMI:
      Distributeur du BIOS                              Award Software International, Inc.
      Version du BIOS                                   F9
      Fabricant du système                              Gigabyte Technology Co., Ltd.
      Nom du système                                    EP45-DS3R
      Version du système                                
      Numéro de série du système                        
      UUID du système                                   00000000-00000000-0000001D-7D0D00E3
      Fabricant de la carte mère                        Gigabyte Technology Co., Ltd.
      Nom de la carte mère                              EP45-DS3R
      Version de la carte mère                          
      Numéro de série de la carte mère                  
      Fabricant du châssis                              Gigabyte Technology Co., Ltd.
      Version du châssis                                
      Numéro de série du châssis                        
      Identifiant du châssis                            
      Type du châssis                                   Desktop Case
      Sockets mémoire (Total/Libres)                    4 / 2
 
 

n°6738958
duxter
Posté le 12-12-2008 à 17:20:08  profilanswer
 

Bonjour, j ai le même soucie avec mon PC depuis un bon moment je soupçonne aussi la RAM j ai aussi fait un test avec ORTHOS qui m' a donné ceci:
 
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 3 seconds - 1 errors, 0 warnings.
Execution halted.
 
Mon pc:
 
MB:     P5bdeluxe Asus
PROC:  Itel x2 e6600 Conroe
Ram:   2 x 1Go Ocz Gold DDR2-800 @ 400 MHz 5-5-5-15
Bios:   AMI
CG:  ATI x1950 Pro
HDD: Sata  1x160 1x250 1x300  
Auriez vous une idée Pour m'aider , Je ne peux pas me servir de mêmtest Je n'ai pas de Lecteur de disquettes . Y a-t-il la possibilité De les démarrer depuis un cd-rom. D'avance, merci de vos réponses  
 
 
 

n°6887078
green_arro​w
Posté le 17-03-2009 à 17:54:02  profilanswer
 

fait un test memtest+


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Hardware
  Matériels & problèmes divers

  nouvelle ram : blue screen

 

Sujets relatifs
résolution max d'une x1400 pour dual screen?Nouvelle config GAMER
Nouvelle config - process et AlimNouvelle config GAMER
Nouvelle config , prob demarageNouvelle config : écran noir :(
Dual-Screen = Wifi ne marche pas ?Nouvelle config, avis
[CONSEIL nouvelle config 1200€ sans ecranNouvelle Config - blue screen
Plus de sujets relatifs à : nouvelle ram : blue screen


Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR