cdrecorder pour windows

Recherche :

Dernière réponse
Sujet : cdrecorder pour windows
hyptos	Salut, j'ai downloadé cdrecorder pour windows et je lance cdrecord -eject -v speed=4 -data dev=2,1,0 "_live.txt" cdrecord trouve mon lecteur, démarre mais ne grave rien c:\cdrecord -eject -v speed=4 -data dev=2,1,0 "_live.mp3" Cdrecord 1.11a12 (i586-pc-cygwin) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '2,1,0' scsibus: 2 target: 1 lun: 0 Using libscg version 'schily-0.5' atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8200 ' Revision : '1.0f' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 2086656 = 2037 KB FIFO size : 4194304 = 4096 KB Track 01: data 0 MB Total size: 1 MB (00:06.60) = 495 sectors Lout start: 1 MB (00:08/45) = 495 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11856 (97:23/69) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 49 Manufacturer: Customer Pressing Oosterhout Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359354 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 0 MB written. WARNING: padding up to secsize. Track 01: Total bytes read/written: 1008953/1009664 (493 sectors). Writing time: 5.548s Fixating... Fixating time: 61.990s cdrecord: fifo had 16 puts and 16 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

Dernière réponse

Sujet : cdrecorder pour windows

hyptos

Salut, j'ai downloadé cdrecorder pour windows et je lance

cdrecord -eject -v speed=4 -data dev=2,1,0 "_live.txt"

cdrecord trouve mon lecteur, démarre mais ne grave rien

c:\cdrecord -eject -v speed=4 -data dev=2,1,0 "_live.mp3"

Cdrecord 1.11a12 (i586-pc-cygwin) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Using libscg version 'schily-0.5'
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8200 '
Revision : '1.0f'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 2086656 = 2037 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB
Total size: 1 MB (00:06.60) = 495 sectors
Lout start: 1 MB (00:08/45) = 495 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11856 (97:23/69)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 49
Manufacturer: Customer Pressing Oosterhout
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359354
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 0 MB written.
WARNING: padding up to secsize.
Track 01: Total bytes read/written: 1008953/1009664 (493 sectors).
Writing time: 5.548s
Fixating...
Fixating time: 61.990s
cdrecord: fifo had 16 puts and 16 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.