je sais comment me servir de ca ?

Recherche :

Dernière réponse
Sujet : je sais comment me servir de ca ?
sbucci	c un driver que donne adaptec pour une carte scsi Eisa BOARD ID="ADP7771" NAME="Adaptec AHA-2740/2742/2744 SCSI Host Adapter" MFR="ADAPTEC, Inc." CATEGORY="MSD" SLOT=EISA LENGTH=330 AMPERAGE=1000 SKIRT=NO READID=YES BUSMASTER=50 IOCHECK=VALID DISABLE=SUPPORTED COMMENTS="AHA-2740/2742 Configuration File Ver. 2.12 Release" IOPORT(1)=0zc87h ;Host configuration definition INITVAL = 0000X00X IOPORT(4)=0zc5ch ;Interrupt definition INITVAL = X000XXXX IOPORT(2)=0zc5dh ;Host configuration definition INITVAL = XXXXXX00 IOPORT(3)=0zc5ah ;SCSI configuration SIZE = WORD INITVAL = XXXXXXXXXXXXXXXX IOPORT(5)=0zc5fh ;Host configuration definition INITVAL = 00XXXXXX FUNCTION = "AIC-7770 Chip Reset" SHOW = NO CHOICE = "" LINK INIT = IOPORT(1) LOC(0) 1B FUNCTION = "Host Adapter Interface Definitions" TYPE = "AIC7771" HELP = "These selections specify those configuration settings that correspond to EISA host bus interface." SUBFUNCTION = "Interrupt Level" HELP = "Interrupt Level configures the interrupt channel (IRQ) used by the host adapter. Multiple AHA-2740 Series host adapters installed in your system can share the same IRQ; however, to increase system performance, you may want to select a different IRQ for each host adapter installed. The IRQ cannot be shared with ISA mode SCSI host adapters such as the Adaptec AHA-1540 and AHA- 1520 Series adapters. If those adapters are installed in your EISA system, they must be assigned unique IRQs." CHOICE = "IRQ 11 LEVEL" LINK IRQ = 11 SHARE = YES TRIGGER = LEVEL INIT=IOPORT(1) LOC(3 0) 11B INIT=IOPORT(4) LOC(7 3 2 1 0) 01011B CHOICE = "IRQ 11 EDGE" LINK IRQ = 11 SHARE = NO TRIGGER = EDGE INIT=IOPORT(1) LOC(3 0) 11B INIT=IOPORT(4) LOC(7 3 2 1 0) 11011B

Dernière réponse

Sujet : je sais comment me servir de ca ?

sbucci

c un driver que donne adaptec pour une carte scsi Eisa

BOARD
ID="ADP7771"
NAME="Adaptec AHA-2740/2742/2744 SCSI Host Adapter"
MFR="ADAPTEC, Inc."
CATEGORY="MSD"
SLOT=EISA
LENGTH=330
AMPERAGE=1000
SKIRT=NO
READID=YES
BUSMASTER=50
IOCHECK=VALID
DISABLE=SUPPORTED
COMMENTS="AHA-2740/2742 Configuration File Ver. 2.12 Release"

IOPORT(1)=0zc87h ;Host configuration definition
INITVAL = 0000X00X
IOPORT(4)=0zc5ch ;Interrupt definition
INITVAL = X000XXXX
IOPORT(2)=0zc5dh ;Host configuration definition
INITVAL = XXXXXX00
IOPORT(3)=0zc5ah ;SCSI configuration
SIZE = WORD
INITVAL = XXXXXXXXXXXXXXXX
IOPORT(5)=0zc5fh ;Host configuration definition
INITVAL = 00XXXXXX

FUNCTION = "AIC-7770 Chip Reset"
SHOW = NO
CHOICE = ""
LINK
INIT = IOPORT(1) LOC(0) 1B

FUNCTION = "Host Adapter Interface Definitions"

TYPE = "AIC7771"
HELP = "These selections specify those configuration
settings that correspond to EISA host bus interface."

SUBFUNCTION = "Interrupt Level"
HELP = "Interrupt Level configures the interrupt channel (IRQ) used by the host adapter. Multiple AHA-2740
Series host adapters installed in your system can share the same IRQ; however, to increase system
performance, you may want to select a different IRQ for each host adapter installed.
The IRQ cannot be shared with ISA mode SCSI host adapters such as the Adaptec AHA-1540 and AHA-
1520 Series adapters. If those adapters are installed in your EISA system, they must be assigned unique
IRQs."

CHOICE = "IRQ 11 LEVEL"
LINK
IRQ = 11
SHARE = YES
TRIGGER = LEVEL
INIT=IOPORT(1) LOC(3 0) 11B
INIT=IOPORT(4) LOC(7 3 2 1 0) 01011B

CHOICE = "IRQ 11 EDGE"
LINK
IRQ = 11
SHARE = NO
TRIGGER = EDGE
INIT=IOPORT(1) LOC(3 0) 11B
INIT=IOPORT(4) LOC(7 3 2 1 0) 11011B