[quote]getAdapter (adapterName, portName) :  Finds, opens, and verifies the specified adapter on  
 the indicated port.
 
getDefaultAdapter()  : Finds, opens, and verifies the default  
     adapter and port. Looks for the default  
     adapter/port in the onewire.properties  
     file
 
targetFamily(family)  : Takes a hexadecimal value to selectively search for  
      this desired family type. If this method is used, then  
      no devices of other families will be found by any of  
      the search methods.  
 DS1990A: family = &H01
   DS2406(P): family = &H12
 
 
setSpeed(speed) : Sets the new speed of data transfer on the 1-Wire  
  Network.  
  speed :  
? 0 (SPEED_REGULAR) set to normal communication speed
? 1 (SPEED_FLEX) set to flexible communication speed used for long lines  
? 2 (SPEED_OVERDRIVE) set to normal communication speed to overdrive  
? 3 (SPEED_HYPERDRIVE) set to normal communication speed to hyper drive
? >3 future speeds  
beginExclusive(blocking) : Gets exclusive use of the 1-Wire to communicate  
  with an iButton or 1-Wire Device.
If want to block waiting for an exclusive access to the adapter: blocking = true
reset() : Sends a Reset to the 1-Wire Network.
setSearchAllDevices() : Sets the 1-Wire Network search to find all iButtons  
  and 1-Wire devices.
 
findFirstDevice() : Returns ?True? if the first iButton or 1-Wire device  
  is found on the 1-Wire Network. If no devices are  
  found, then ?False? will be returned.
 
findNextDevice() : Returns ?True? if the next iButton or 1-Wire device  
  is found. The previous 1-Wire device found is used  
  as a starting point in the search. If no more devices  
  are found then ?False? will be returned.
 
getAddressAsString() : Gets the 'current' 1-Wire device address being used  
  by the adapter as a String. This address is the last  
  iButton or 1-Wire device found in a search  
  (findNextDevice()...).
 
setupContainer (sourceAdapter, newAddress)
  : Provides this container with the adapter object used  
   to access this device and the address of the iButton  
   or 1-Wire device.  
sourceAdapter :  adapter object required to  
 communicate with this iButton  
newAddress : address of this 1-Wire device
 
readDevice() : Retrieves the 1-Wire device sensor state.
 
getLatchState (channel, state) : Checks the latch state of the indicated channel.
    Boolean function gives back ?True? if channel  
    is open and ?False? if it is closed.
     PIO A : channel = 0
     PIO B  : channel = 1
     Dim state As Object / state = adapter.readDevice
 
 
setLatchState (channel, latchState, doSmart, state)  
    : Sets the latch state of the indicated channel.  
     PIO A : channel = 0
     PIO B  : channel = 1
     To close:  latchState = False  
     To open: latchState = True  
     Dim doSmart As Boolean / doSmart = False
     Dim state As Object / state = adapter.readDevice
 
writeDevice (state)           : Writes the 1-Wire device sensor state that have been  
   changed by 'set' methods.  
getLevel (channel, state)  : Checks the sensed level on the indicated channel.
     Boolean function gives back ?True? if the channel
     is activated, otherwise ?False?
     PIO A : channel = 0
     PIO B  : channel = 1
     Dim state As Object / state = adapter.readDevice
 
endExclusive() : Relinquishes exclusive control of the 1-Wire  
  Network.