K7V8363 KINETIZ 7B/E BIOS V4.0LCP release note
       
 
This disk contains three files:K7B_V40.BIN,README.TXT and AWDFLASH.EXE
 
1.The checksum of K7B_V40.BIN is 2FAE(Hex);
 
2. How to use AWDFLASH.EXE utility:
   This is a flash memory write/read utility.
IMPORTANT NOTE:
   The AWDFLASH utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT AS"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the AWDFLASH utility.
Usage:
      AWDFLASH [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
     BIOSfile1: New BIOS Name For FLASH Programming
     BIOSfile2: BIOS File For Backing-up the Original BIOS
 
 <command> function definition:
      cc: clear CMOS;        cp: clear PnP;
      cd: clear DMI.
/sn: No Original BIOS Backup. If this option is chosen:
      Be sure your new BIOS is compatible with your MB. If not, the system  
        are damaged.
/sy: Backup Original BIOS to Disk File.
Examples:
        AWDFLASH ****.BIN /py/sn/cd/cp
 
Warning:  
   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!
 
UPDATE DATE:03/07/2003