Y a quelque chose à configurer dans la config de X pour pouvoir jouer ? Parce que j'ai une voodoo 3, j'ai vérifié que les paquetages glide sont installés, mais dès que je lance un jeu le changement de résolution fait planter je sais pas quoi et je me retrouve à la fenêtre de login pour lancer KDE.
Quelqu'un pourait me dire où trouver un bon Howto, j'aimerais bien jouer à unreal tournament et tux racer :-).

tu pourrais donner plus d'info ?
versions de XFree
packages installé
distribution
résultats de la commande glxinfo
etc ...

J'ai Xfree 4.1.0 sur une Mandrake 8.1
 
Packages installés:
Glide_V3-DRI
Glide_V5
XFree86-glide-module
 
Résultats de glxinfo:
name of display: :0.0
gd error (glide): gd error (glide): grSstSelect:  non-existent SSTgd error (glide): grSstSelect:  non-existent SSTErreur de segmentation
 
Et ben voilà !

je peux voir ton fichier de conf de XFree ?

je veux celui de XFree 4 ( XF86Config-4 )

Voilà...
XF86Config-4
 
# File generated by XFdrake.
 
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
 
Section "Files"
 
    RgbPath "/usr/X11R6/lib/X11/rgb"
 
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
 
    FontPath   "unix/:-1"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals
 
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap
 
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom
 
    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Keyboard section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"
 
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr_CH"
 
EndSection
 
# **********************************************************************
# Pointer section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/mouse"
    Option "ZAxisMapping" "4 5"
 
# ChordMiddle is an option for some 3-button Logitech mice
 
#    Option "ChordMiddle"
 
EndSection
 
 
 
Section "Module"
 
# This loads the DBE extension module.
 
    Load "dbe"
 
    Load "glx"
    Load "dri"
 
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
 
    SubSection "extmod"
 #Option "omit xfree86-dga"
    EndSubSection
 
# This loads the Type1 and FreeType font modules
 
    Load "type1"
    Load "freetype"
EndSection
 
 
Section "DRI"
    Mode 0666
EndSection
 
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
    Identifier "monitor1"
    VendorName "Unknown"
    ModelName  "Unknown"
 
 
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-70
 
 
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-120
 
 
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
 
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
 
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
 
 
EndSection
 
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection
 
Section "Device"
    Identifier  "Voodoo3 (generic)"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "tdfx"
#    VideoRam    16384
    # Clock lines
 
 
    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"
 
    Option      "AGPMode"  "1"
    Option      "DPMS"  "on"
EndSection
 
 
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
 
Section "Screen"
    Identifier "screen1"
    Device      "Voodoo3 (generic)"
    Monitor     "monitor1"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
 
Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
 
    InputDevice "Mouse1" "CorePointer"
 
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Essaye par hasard (au moins au niveau de UT) de choir OpenGL a la place de glide ca devrait marcher (et apparemment il serait impossible de jouer en Glide (dommage..si qqu'un a une soluce je suis preneur )avec Xfree4 (pour voir faq sur le site de Loki : http://faqs.lokigames.com/faq.php3 [...] &faq_id=7)
 
 
 
 
Unreal Tournament FAQ  
Last Updated on: 2000-09-16 01:43:52  
 
This is where you will find useful information about Unreal Tournament for Linux. The following are answers to some frequently asked questions about this game. Please read these before e-mailing Loki Technical Support - Chances are your question is answered here too!  
 
 
9. Renderer
9.7 Can I use the Glide renderer with XFree86 4.x?
Answer:
Since the Glide renderer was written to glide2, and XFree86 4.x uses glide3, this renderer is not supported under XFree86 4.x.  
Support inquries should be addressed to support@lokigames.com.  
FAQ's maintained by faqs@lokigames.com.

c'est bizarre Glide_V3-DRI et Glide_V5 ont les même fichiers, donc cela me semble bizarre que les 2 soient installé.
 
Si tu as une Voodoo 3 fais ceci :
> rpm -e Glide_V5
> rpm -e Glide_V3-DRI
> urpmi Glide_V3-DRI
> urpmi Glide_V3
> urpmi Mesa-common
 
restart X
 
> glxinfo

Y a des conflits
Des problèmes sont survenus durant l'installation
file /usr/lib/libglide3.so.3 conflicts between attemptes installs of Glide_V3-DRI-cvs-3mdk and Glide_V3-2.60.15-7 mdk
Qu'est-ce que je dois faire pour réinstaller ?

enlève Glive_V3 et install Glive_V3-DRI