Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
3830 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs

  [debian] resolution ou configuration d'ecran

 
 


Dernière réponse
Sujet : [debian] resolution ou configuration d'ecran
simogeo c'est reglé chef. Merci [:romf]

Votre réponse
Nom d'utilisateur    Pour poster, vous devez être inscrit sur ce forum .... si ce n'est pas le cas, cliquez ici !
Le ton de votre message                        
                       
Votre réponse
[b][i][u][strike][spoiler][fixed][cpp][url][email][img][*]   
 
   [quote]
 
Options

 
Vous avez perdu votre mot de passe ?


Vue Rapide de la discussion
simogeo c'est reglé chef. Merci [:romf]
Ben_be T'as essayé les drivers proprio Matrox?
 
edit: http://www.matrox.com/mga/support/ [...] t/home.cfm  :D
zoidberg Met le resultat du fichier de log, on pourra t'aider avec.
il est sous /var/log/Xorg.0.log je crois.
simogeo kokkoooo [:jar jar]
simogeo hello
bon, ca ne fonctionne toujours pas lorsque je selectionne le driver mga.
 
s'il me le propose dans la liste c'est qu'il est déjà dispo j'imagine non ?
zoidberg postes le resultat de /var/log/X_je_sais_plus_quoi_.log il devrait y avoir des infos interessantes sur ce qu'il se passe.
au fait, le module mga pour xorg est installe/compille? sinon tu dois pouvoir le faire avec module-assistant.
simogeo merci ccp6128
 
voilà ou j'en suis mais ca ne fonctionne toujours pas en fait :
 

Citation :

# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86
 
Section "Files"
 FontPath "unix/:7100"   # local font server
 # if the local font server has problems, we can fall back on these
 FontPath "/usr/lib/X11/fonts/misc"
 FontPath "/usr/lib/X11/fonts/cyrillic"
 FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/Type1"
 FontPath "/usr/lib/X11/fonts/CID"
 FontPath "/usr/lib/X11/fonts/Speedo"
 FontPath "/usr/lib/X11/fonts/100dpi"
 FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
 
Section "Module"
 Load "GLcore"
 Load "bitmap"
 Load "dbe"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "record"
 Load "speedo"
 Load "type1"
 Load "vbe"
EndSection
 
Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver  "keyboard"
 Option  "CoreKeyboard"
 Option  "XkbRules" "xfree86"
 Option  "XkbModel" "pc104"
 Option  "XkbLayout" "us"
EndSection
 
Section "InputDevice"
 Identifier "Configured Mouse"
 Driver  "mouse"
 Option  "CorePointer"
 Option  "Device"  "/dev/psaux"
 Option  "Protocol"  "ImPS/2"
 Option  "Emulate3Buttons" "true"
 Option  "ZAxisMapping"  "4 5"
EndSection
Section "InputDevice"
 Identifier "Generic Mouse"
 Driver  "mouse"
 Option  "SendCoreEvents" "true"
 Option  "Device"  "/dev/input/mice"
 Option  "Protocol"  "ImPS/2"
 Option  "Emulate3Buttons" "true"
 Option  "ZAxisMapping"  "4 5"
EndSection
 
Section "Device"
 Identifier "Matrox G400"
 Driver  "mga"
EndSection
 
Section "Monitor"
 Identifier "Sony G400"
 HorizSync 28-50
 VertRefresh 43-75
 Option  "DPMS"
EndSection
 
Section "Screen"
 Identifier "Default Screen"
 Device  "Matrox G400"
 Monitor  "Sony G400"
 DefaultDepth 24
 SubSection "Display"
  Depth  1
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  4
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  8
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  15
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  16
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  24
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection
 
Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
 InputDevice "Generic Mouse"
EndSection
 
Section "DRI"
 Mode 0666
EndSection


 
ccp6128 Driver mga pour les cartes matrox
simogeo j'ai une matrox 400 ou 450 apparemment
je ne sais pas quel chipset choisir dans la liste après le : dpkg-reconfigure xserver-xfree86....
 
c'est quoi qu'il y a la dessus?
ccp6128 le driver vesa est limite au 1024x768 maxi.
Si tu veux monter au dela, mets le driver correspondant a ta carte graphique.
simogeo bon, en fait 1024*768, c'est pas assez [:dawao]
 
 
voici mon fichier de conf :
 

Citation :


# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86
 
Section "Files"
 FontPath "unix/:7100"   # local font server
 # if the local font server has problems, we can fall back on these
 FontPath "/usr/lib/X11/fonts/misc"
 FontPath "/usr/lib/X11/fonts/cyrillic"
 FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/Type1"
 FontPath "/usr/lib/X11/fonts/CID"
 FontPath "/usr/lib/X11/fonts/Speedo"
 FontPath "/usr/lib/X11/fonts/100dpi"
 FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
 
Section "Module"
 Load "GLcore"
 Load "bitmap"
 Load "dbe"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "record"
 Load "speedo"
 Load "type1"
 Load "vbe"
EndSection
 
Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver  "keyboard"
 Option  "CoreKeyboard"
 Option  "XkbRules" "xfree86"
 Option  "XkbModel" "pc104"
 Option  "XkbLayout" "us"
EndSection
 
Section "InputDevice"
 Identifier "Configured Mouse"
 Driver  "mouse"
 Option  "CorePointer"
 Option  "Device"  "/dev/psaux"
 Option  "Protocol"  "ImPS/2"
 Option  "Emulate3Buttons" "true"
 Option  "ZAxisMapping"  "4 5"
EndSection
Section "InputDevice"
 Identifier "Generic Mouse"
 Driver  "mouse"
 Option  "SendCoreEvents" "true"
 Option  "Device"  "/dev/input/mice"
 Option  "Protocol"  "ImPS/2"
 Option  "Emulate3Buttons" "true"
 Option  "ZAxisMapping"  "4 5"
EndSection
 
Section "Device"
 Identifier "Generic Video Card"
 Driver  "vesa"
EndSection
 
Section "Monitor"
 Identifier "Sony G400"
 HorizSync 28-50
 VertRefresh 43-75
 Option  "DPMS"
EndSection
 
Section "Screen"
 Identifier "Default Screen"
 Device  "Generic Video Card"
 Monitor  "Sony G400"
 DefaultDepth 24
 SubSection "Display"
  Depth  1
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  4
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  8
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  15
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  16
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  24
  Modes  "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection
 
Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
 InputDevice "Generic Mouse"
EndSection
 
Section "DRI"
 Mode 0666
EndSection


 
alors pourquoi je ne peux pas choisir du 1280*1024 depuis mon GUI???  [:mlc]
merci [:john keats]  
simogeo yo black_lord [:john keats]  [:john keats]  [:john keats]  
 
 
et merci bibiskuk [:romf]
 
bon ca marche a peu pres -j'ai rajoute le 1024*768, donc fete du slip  [:cap'tain caca]  [:cyriadis]  [:cap'tain caca]  [:simogeo]  
black_lord sismo  [:john keats] [:john keats] [:john keats] [:john keats] [:john keats]
 
dans ton /etx/X11/xorg.conf en effet
 
(essaye ctrl-alt-+)
modifier ton /etc/X11/xorg.conf ?
simogeo hello,
je veux booster ma resolution d'ecran... actuellement en 800*600 -sur un 19pouces .... mais le menu deroulant ne me propose pas davantage. seulement 640*400.
Comment dois-je faire?
Mettre le driver d'ecran a jour? si oui comment?
 
desole de vous emmerder pour si peu, mai sje galere ...
precision , debian 3.1
 
 
merci  :hello:  [:john keats]

Forum MesDiscussions.Net, Version 2010.2
(c) 2000-2011 Doctissimo

Copyright © 1997-2025 Groupe LDLC (Signaler un contenu illicite / Données personnelles)