 |
||
| ||
| |||||
| Dernière réponse | |
|---|---|
| Sujet : kde marche plus | |
| thierry_b | Si si ,ca venait d'udev.
Je l'ai viré et tout remarche parfaitement. Fallait peut-tre updater un fichier de config, et moi je fais tout le temps N lors des maj d'apt. Je l'ai viré complètement, puis remis et ca a l'air de marcher nikel. Je vous dirai si au prochain reboot, j'ai des ennuis, mais je ne pense pas. Merci bcp. A+ |
| Aperçu |
|---|
| Vue Rapide de la discussion |
|---|
| thierry_b | Si si ,ca venait d'udev.
Je l'ai viré et tout remarche parfaitement. Fallait peut-tre updater un fichier de config, et moi je fais tout le temps N lors des maj d'apt. Je l'ai viré complètement, puis remis et ca a l'air de marcher nikel. Je vous dirai si au prochain reboot, j'ai des ennuis, mais je ne pense pas. Merci bcp. A+ |
| udok | ouai alors là je suis surpris parce qu'udev n'a aucun pb de ce coté donc je doute que le probleme vienne de là ...
essaie ça : cd /etc/udev grep null * grep null */* |
| thierry_b | Oui, j'utilise udev. Ca lancait bien kde, mais en fait, je c pas comment les droits de /dev/null ont été remis... Je vais tenter de désactiver udev. Je vous dirai si ca marche. A+ |
| udok | ouai enfin mettre les droits à la main c'est une solution temporaire mais faudra trouver ce qui a causé parce que c'est pas normal et en plus ça risque de se reproduire au prochain reboot
qu'est ce qui gère ton /dev ? makedev ? devfs ? udev ? |
| thierry_b | no enfin je pense pas,
mais j'ai restauré une image de ma debian, et en refaisant je apt, je suis retombé sur ce pb. Ca doit etre apt, qui m'a modifié ca.... Je v mettre tes droits, je te tiens au courant. Merci A+ |
| udok | tu utilises devfs ? |
| udok | super [:mlc2]
ché pas kikafé le con là, mais c'est pas bon tu devrais avoir : crw-rw-rw- pour les droits |
| thierry_b | crw-rw---- 1 root root 1, 3 2005-02-10 17:53 /dev/null |
| udok | ls -l /dev/null |
| thierry_b | et enfin le /etc/X11/Xsession
----------------------------------------------------------- #!/bin/sh # # /etc/X11/Xsession # # global Xsession file -- used by display managers and xinit (startx) # $Id: Xsession 1870 2004-09-27 15:47:30Z fabbione $ set -e PROGNAME=Xsession message () { # pretty-print messages of arbitrary length; use xmessage if it # is available and $DISPLAY is set MESSAGE="$PROGNAME: $*" echo "$MESSAGE" | fold -s -w ${COLUMNS:-80} >&2 if [ -n "$DISPLAY" ] && which xmessage > /dev/null 2>&1; then echo "$MESSAGE" | fold -s -w ${COLUMNS:-80} | xmessage -center -file - fi } message_nonl () { # pretty-print messages of arbitrary length (no trailing newline); use # xmessage if it is available and $DISPLAY is set MESSAGE="$PROGNAME: $*" echo -n "$MESSAGE" | fold -s -w ${COLUMNS:-80} >&2; if [ -n "$DISPLAY" ] && which xmessage > /dev/null 2>&1; then echo -n "$MESSAGE" | fold -s -w ${COLUMNS:-80} | xmessage -center -file - fi } errormsg () { # exit script with error message "$*" exit 1 } internal_errormsg () { # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message # One big call to message() for the sake of xmessage; if we had two then # the user would have dismissed the error we want reported before seeing the # request to report it. errormsg "$*" \ "Please report the installed version of the \"xfree86-common\"" \ "package and the complete text of this error message to" \ "<debian-x@lists.debian.org>." } run_parts () { # until run-parts --noexec is implemented if [ -z "$1" ]; then internal_errormsg "run_parts() called without an argument." fi if [ ! -d "$1" ]; then internal_errormsg "run_parts() called, but \"$1\" does not exist or is" \ "not a directory." fi for F in $(ls $1); do if expr "$F" : '[[:alnum:]_-]\+$' > /dev/null 2>&1; then if [ -f "$1/$F" ]; then echo "$1/$F" fi fi done } # initialize variables for use by all session scripts OPTIONFILE=/etc/X11/Xsession.options SYSRESOURCES=/etc/X11/Xresources USRRESOURCES=$HOME/.Xresources SYSSESSIONDIR=/etc/X11/Xsession.d USERXSESSION=$HOME/.xsession ALTUSERXSESSION=$HOME/.Xsession ERRFILE=$HOME/.xsession-errors # attempt to create an error file; abort if we cannot if touch "$ERRFILE" 2> /dev/null && [ -w "$ERRFILE" ] && [ ! -L "$ERRFILE" ]; then chmod 600 "$ERRFILE" elif ERRFILE=$(tempfile 2> /dev/null); then if ! ln -sf "$ERRFILE" "${TMPDIR:=/tmp}/xsession-$USER"; then message "warning: unable to symlink \"$TMPDIR/xsession-$USER\" to" \ "\"$ERRFILE\"; look for session log/errors in" \ "\"$TMPDIR/xsession-$USER\"." fi else errormsg "unable to create X session log/error file; aborting." fi exec >>"$ERRFILE" 2>&1 echo "$PROGNAME: X session started for $LOGNAME at $(date)" # sanity check; is our session script directory present? if [ ! -d "$SYSSESSIONDIR" ]; then errormsg "no \"$SYSSESSIONDIR\" directory found; aborting." fi # Attempt to create a file of non-zero length in /tmp; a full filesystem can # cause mysterious X session failures. We do not use touch, :, or test -w # because they won't actually create a file with contents. We also let standard # error from tempfile and echo go to the error file to aid the user in # determining what went wrong. WRITE_TEST=$(tempfile) if ! echo "*" >>"$WRITE_TEST"; then message "warning: unable to write to ${WRITE_TEST%/*}; X session may exit" \ "with an error" fi rm -f "$WRITE_TEST" # use run-parts to source every file in the session directory; we source # instead of executing so that the variables and functions defined above # are available to the scripts, and so that they can pass variables to each # other SESSIONFILES=$(run_parts $SYSSESSIONDIR) if [ -n "$SESSIONFILES" ]; then for SESSIONFILE in $SESSIONFILES; do . $SESSIONFILE done fi exit 0 # vim:set ai et sts=2 sw=2 tw=80: ------------------------------------------------------------ la ligne 81 de ce fichier: if touch "$ERRFILE" 2> /dev/null && [ -w "$ERRFILE" ] && Merci A+ |
| thierry_b | Re voila.
.xsession-errors: /etc/X11/Xsession: line 81: /dev/null: Permission non accordée /etc/X11/Xsession: line 84: /dev/null: Permission non accordée Xsession: unable to create X session log/error file; aborting. /etc/X11/Xsession: line 18: /dev/null: Permission non accordée ------------------------------------------------------------ kdm.log ******************************************************************************** Note that your system uses syslog. All of kdm's internally generated messages (i.e., not from libraries and external programs/scripts it uses) go to the daemon.* syslog facility; check your syslog configuration to find out to which file(s) it is logged. PAM logs messages related to authentication to authpriv.*. ******************************************************************************** This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 28 18:26:56 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 28 19:37:48 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 28 20:24:18 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 29 09:04:03 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 GetModeLine - scrn: 0 clock: 113310 GetModeLine - hdsp: 1024 hbeg: 1096 hend: 1208 httl: 1392 vdsp: 768 vbeg: 769 vend: 772 vttl: 814 flags: 6 FreeFontPath: FPE "/usr/lib/X11/fonts/misc" refcount is 2, should be 1; fixing. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 29 14:59:22 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 GetModeLine - scrn: 0 clock: 113310 GetModeLine - hdsp: 1024 hbeg: 1096 hend: 1208 httl: 1392 vdsp: 768 vbeg: 769 vend: 772 vttl: 814 flags: 6 GetModeLine - scrn: 0 clock: 113310 GetModeLine - hdsp: 1024 hbeg: 1096 hend: 1208 httl: 1392 vdsp: 768 vbeg: 769 vend: 772 vttl: 814 flags: 6 FreeFontPath: FPE "/usr/lib/X11/fonts/misc" refcount is 2, should be 1; fixing. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 29 23:35:12 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 30 02:01:00 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.040929 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Sep 29 17:41:41 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 30 10:57:39 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.041028 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Oct 28 17:46:56 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 30 13:35:58 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.041028 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Oct 28 17:46:56 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 30 13:37:16 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.041028 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Oct 28 17:46:56 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 30 14:54:02 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 GetModeLine - scrn: 0 clock: 113310 GetModeLine - hdsp: 1024 hbeg: 1096 hend: 1208 httl: 1392 vdsp: 768 vbeg: 769 vend: 772 vttl: 814 flags: 6 FreeFontPath: FPE "/usr/lib/X11/fonts/misc" refcount is 2, should be 1; fixing. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.041028 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Oct 28 17:46:56 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 01:47:11 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7.041028 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Oct 28 17:46:56 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 02:01:41 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 (II) Initializing extension GLX Could not init font path element unix/:7100, removing from list! QImage::convertDepth: Image is a null image QImage::smoothScale: Image is a null image This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 02:43:52 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 02:05:10 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 02:43:52 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 02:15:42 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-11)) #1 SMP Tue Sep 14 13:22:11 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 02:19:59 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-11)) #1 SMP Tue Sep 14 13:22:11 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 02:21:14 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-11)) #1 SMP Tue Sep 14 13:22:11 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 09:17:25 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 02:43:52 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 09:28:15 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 02:43:52 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 10:02:15 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 02:43:52 CEST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 12:07:43 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-11)) #1 SMP Tue Sep 14 13:22:11 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 12:28:19 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 13:04:46 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.7 (root@thierry) (version gcc 3.3.4 (Debian 1:3.3.4-11)) #1 SMP Tue Sep 14 13:22:11 CEST 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 13:08:55 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.8.1 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 13:33:36 CET 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 14:10:25 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.8.1 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 13:33:36 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 14:12:16 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.8.1 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 13:33:36 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 14:39:55 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 16:58:33 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to submit@bugs.debian.org. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 17:00:54 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 20:53:51 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 31 21:12:02 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 1 01:16:21 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list! SetClientVersion: 0 8 GetModeLine - scrn: 0 clock: 113310 GetModeLine - hdsp: 1024 hbeg: 1096 hend: 1208 httl: 1392 vdsp: 768 vbeg: 769 vend: 772 vttl: 814 flags: 6 FreeFontPath: FPE "/usr/lib/X11/fonts/misc" refcount is 2, should be 1; fixing. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.26 i686 [ELF] Build Date: 28 September 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9 (root@thierry) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Sun Oct 31 12:58:22 CET 2004 T Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 1 09:07:58 2004 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Initializing extension GLX Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already r |
| udok | ma debian est à jour et ça marche très bien chez moi
balance ton ~/.xsession-errors et ton /var/log/kdm |
| thierry_b | Ben c'est peut-tre du au dernier apt de mise à jour qui c'est...
Merci A+ |
| mikala | hum ...
tu as *au* moins regardé les rapports de bogue concernant ta distribution ? Accessoirement tu n'aurais pas un peu plus d'information que ce ' ca bloque depuis ce matin '.C'est étrange que ceci survienne de manière innopiné . |
| thierry_b | Bonjour,
depuis ce matin, kde ne marche plus sous ma debian unstable, il bloqu au chargement des peripheriques... Quelqu'un a t'il le même pb? Merci A+ |
