Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2630 connectés 

 


Dernière réponse
Sujet : PB de son avec ma carte tuner seulement avec ARTE et M6 ...
chameaux j ai trouve ça ... a priori le pb vient bien de bttv
The bttv driver seems to misdetect Prolink Pixelview cards pretty badly. There are five Prolink cards listed in CARDLIST for the bttv driver:
 
  card=16 - Prolink Pixelview PlayTV (bt878)
  card=37 - Prolink PixelView PlayTV pro
  card=50 - Prolink PV-BT878P+4E /
            PixelView PlayTV PAK /
            Lenco MXTV-9578 CP
  card=70 - Prolink Pixelview PV-BT878P+ (Rev.4C)
  card=72 - Prolink Pixelview PV-BT878P+9B
            (PlayTV Pro rev.9B FM+NICAM)
 
The bttv driver cannot seem to autodetect these cards correctly. We have found that cards which should use card=70 but are instead loaded using card=72 are causing audio mute/unmute to fail randomly, or even be inverted, resulting in no audio or just snippets of audio. To avoid this, please make sure you are using the correct variant of this card. Specifically, the rev 9D of the newer Pixelview cards should use card=70 and not card=72.

Votre réponse
Nom d'utilisateur    Pour poster, vous devez être inscrit sur ce forum .... si ce n'est pas le cas, cliquez ici !
Le ton de votre message                        
                       
Votre réponse


[b][i][u][strike][spoiler][fixed][cpp][url][email][img][*]   
 
   [quote]
 

Options

 
Vous avez perdu votre mot de passe ?


Vue Rapide de la discussion
chameaux j ai trouve ça ... a priori le pb vient bien de bttv
The bttv driver seems to misdetect Prolink Pixelview cards pretty badly. There are five Prolink cards listed in CARDLIST for the bttv driver:
 
  card=16 - Prolink Pixelview PlayTV (bt878)
  card=37 - Prolink PixelView PlayTV pro
  card=50 - Prolink PV-BT878P+4E /
            PixelView PlayTV PAK /
            Lenco MXTV-9578 CP
  card=70 - Prolink Pixelview PV-BT878P+ (Rev.4C)
  card=72 - Prolink Pixelview PV-BT878P+9B
            (PlayTV Pro rev.9B FM+NICAM)
 
The bttv driver cannot seem to autodetect these cards correctly. We have found that cards which should use card=70 but are instead loaded using card=72 are causing audio mute/unmute to fail randomly, or even be inverted, resulting in no audio or just snippets of audio. To avoid this, please make sure you are using the correct variant of this card. Specifically, the rev 9D of the newer Pixelview cards should use card=70 and not card=72.
chameaux toujours meme pb, j ai installe xawtv pour voir et c pareil
mirtouf dmesg | grep bttv
chameaux

mirtouf a écrit :

Essaye d'affiner ta fréquence pour voir.


 
voila j ai ete dans setup management finetune et j ai affiné la frequence mais le pb est tjs la

mirtouf Essaye d'affiner ta fréquence pour voir.
chameaux

mirtouf a écrit :

Réglage fin de la fréquence ?


 
Oui et ça marche nickel avec les autres chaines ... la stereo est tres bonne ... no comprendo  :heink:

mirtouf Réglage fin de la fréquence ?
chameaux Voila j ai installer sous ma debian une carte tuner pinnacle pctv Stéreo. J utilise tvtime et ça marche bien sauf pour ARTE et M6 ou le son se coupe au bout de 3s ....  :??:

Copyright © 1997-2025 Groupe LDLC (Signaler un contenu illicite / Données personnelles)