Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2738 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs

  lm_sensors

 
 


Dernière réponse
Sujet : lm_sensors
bemixam bon alors apres avoir tripatouille dans tous les sens je me retrouve avec ca :

Code :
  1. zero root # sensors
  2. as99127f-i2c-0-2d
  3. Adapter: SMBus I801 adapter at e800
  4. Algorithm: Non-I2C SMBus adapter
  5. VCore 1:   +1.87 V  (min =  +4.08 V, max =  +4.08 V)       ALARM
  6. VCore 2:   +1.87 V  (min =  +4.08 V, max =  +4.08 V)       ALARM
  7. +3.3V:     +3.47 V  (min =  +2.97 V, max =  +3.63 V)
  8. +5V:       +5.04 V  (min =  +4.50 V, max =  +5.48 V)
  9. +12V:     +11.97 V  (min = +10.79 V, max = +13.11 V)
  10. -12V:     -12.08 V  (min = -15.06 V, max = -12.32 V)       ALARM
  11. -5V:       -5.22 V  (min =  -5.48 V, max =  -4.50 V)
  12. fan1:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
  13. fan2:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
  14. fan3:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
  15. temp1:       +30°C  (limit =  +60°C)
  16. temp2:     +31.3°C  (limit =  +67°C, hysteresis =  +60°C)
  17. temp3:    +112.2°C  (limit =  +60°C, hysteresis =  +50°C)
  18. vid:      +1.800 V
  19. alarms:
  20. beep_enable:
  21.           Sound alarm enabled


 
mais c est completement different de ce que me donne gkrellm
( il me donne 112 , 9.0 et 30.0 )
 
 
bref les deux sont faux .... alors les questions sont :
est ce normal ?
comment rectifier ca ?
lequel rectifier ?

Votre réponse
Nom d'utilisateur    Pour poster, vous devez être inscrit sur ce forum .... si ce n'est pas le cas, cliquez ici !
Le ton de votre message                        
                       
Votre réponse
[b][i][u][strike][spoiler][fixed][cpp][url][email][img][*]   
 
   [quote]
 
Options

 
Vous avez perdu votre mot de passe ?


Vue Rapide de la discussion
bemixam bon alors apres avoir tripatouille dans tous les sens je me retrouve avec ca :

Code :
  1. zero root # sensors
  2. as99127f-i2c-0-2d
  3. Adapter: SMBus I801 adapter at e800
  4. Algorithm: Non-I2C SMBus adapter
  5. VCore 1:   +1.87 V  (min =  +4.08 V, max =  +4.08 V)       ALARM
  6. VCore 2:   +1.87 V  (min =  +4.08 V, max =  +4.08 V)       ALARM
  7. +3.3V:     +3.47 V  (min =  +2.97 V, max =  +3.63 V)
  8. +5V:       +5.04 V  (min =  +4.50 V, max =  +5.48 V)
  9. +12V:     +11.97 V  (min = +10.79 V, max = +13.11 V)
  10. -12V:     -12.08 V  (min = -15.06 V, max = -12.32 V)       ALARM
  11. -5V:       -5.22 V  (min =  -5.48 V, max =  -4.50 V)
  12. fan1:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
  13. fan2:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
  14. fan3:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
  15. temp1:       +30°C  (limit =  +60°C)
  16. temp2:     +31.3°C  (limit =  +67°C, hysteresis =  +60°C)
  17. temp3:    +112.2°C  (limit =  +60°C, hysteresis =  +50°C)
  18. vid:      +1.800 V
  19. alarms:
  20. beep_enable:
  21.           Sound alarm enabled


 
mais c est completement different de ce que me donne gkrellm
( il me donne 112 , 9.0 et 30.0 )
 
 
bref les deux sont faux .... alors les questions sont :
est ce normal ?
comment rectifier ca ?
lequel rectifier ?
[G@Z] DariuS bah tu les as chargé au moins ?
 
si c'est pas le cas, modprobe i2c-xxx ou x est ce qu'il te fo comme modules (cf le modprobe -l pour trouver les tiens) et aprés relance ton sensors-detect ca devrait aller mieux ;)
 
lis le readme y'a ce qu'il faut dedans ou alors sur le site d'lm_sensors direct.
bemixam vi
 
mais j ai mis en modules .. ca viens peut etre de ca ..
 
j ai pas essaye en les metant en dur dans le noyo
[G@Z] DariuS t'as compilé la prise en charge i2c dans ton noyau ?
bemixam rpm qui marche pas ... mouais ...
 
et un ebuild ?  
 
il est deja installe ... il doit bien y avoir un moyen de le faire fonctionner quand meme !
el_loco Tu devrais prendre le tar.gz, le recompiler et l installer. Moi j ai du faire ca parce que le rpm de mandrake ne marchait pas. et tu regarde le readme
bemixam comme beaucoup de personnes je cherche a avoir la temperature du cpu dans gkrellm
 
j ai donc emerge gkrellm et gkrellmsensors ( et donc indirectement lm-sensors )
 
seulement voila il doit falloir charger le module correspondant a ma carte  
mais ca ne fonctionne pas  
 
voila ce que donne sensors-detect
 

Code :
  1. We can start with probing for (PCI) I2C or SMBus adapters.
  2. You do not need any special privileges for this.
  3. Do you want to probe now? (YES/no): YES
  4. Probing for PCI bus adapters...
  5. Use driver `i2c-i801' for device 00:1f.3: Intel 82801BA ICH2
  6. Use driver `i2c-riva' for device 01:00.0: GeForce2 GTS
  7. Probe succesfully concluded.
  9. We will now try to load each adapter module in turn.
  10. Load `i2c-i801' (say NO if built into your kernel)? (YES/no): YES
  11. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i801.o: unresolved symbol i2c_del_adapter_R97e1c952
  12. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i801.o: unresolved symbol i2c_add_adapter_Rd50a523b
  13. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i801.o: insmod /lib/modules/2.4.19-gentoo-r5/misc/i2c-i801.o failed
  14. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i801.o: insmod i2c-i801 failed
  15. Loading failed ()... skipping.
  16. Load `i2c-riva' (say NO if built into your kernel)? (YES/no): YES
  17. modprobe: Can't locate module i2c-riva
  18. Loading failed ()... skipping.
  19. ** Note: i2c-riva module is available at
  20. ** http://drama.obuda.kando.hu/~fero/cgi-bin/rivatv.shtml
  21. Do you now want to be prompted for non-detectable adapters? (yes/NO): NO
  22. To continue, we need module `i2c-dev' to be loaded.
  23. If it is built-in into your kernel, you can safely skip this.
  24. i2c-dev is not loaded. Do you want to load it now? (YES/no): YES
  25. modprobe: Can't locate module i2c-dev
  26. Loading failed (), expect problems later on.
  28. We are now going to do the adapter probings. Some adapters may hang halfway
  29. through; we can't really help that. Also, some chips will be double detected;
  30. we choose the one with the highest confidence value in that case.
  31. If you found that the adapter hung after probing a certain address, you can
  32. specify that address to remain unprobed. That often
  33. includes address 0x69 (clock chip).
  34. Couldn't open /proc/bus/i2c?!? at /usr/sbin/sensors-detect line 2900, <STDIN> line 5.

 
 

Code :
  1. zero i2o # sensors
  2. Can't access /proc file
  3. /proc/sys/dev/sensors/chips or /proc/bus/i2c unreadable;
  4. Make sure you have done 'modprobe i2c-proc'!


 

Code :
  1. zero i2o # modprobe i2c-proc
  2. modprobe: Can't locate module i2c-proc


 
 

Code :
  1. zero i2o # pwd
  2. /lib/modules/2.4.19-gentoo-r5/kernel/drivers/message/i2o
  3. zero i2o # ls
  4. i2o_config.o  i2o_core.o  i2o_lan.o  i2o_proc.o

 
 
 

Code :
  1. zero i2o # depmod -a
  2. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/adm1021.o
  3. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/adm1024.o
  4. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/adm1025.o
  5. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/adm9240.o
  6. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/bt869.o
  7. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/ddcmon.o
  8. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/ds1621.o
  9. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/eeprom.o
  10. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/fscpos.o
  11. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/fscscy.o
  12. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/gl518sm.o
  13. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/gl520sm.o
  14. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-ali1535.o
  15. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-ali15x3.o
  16. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-amd756.o
  17. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-hydra.o
  18. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-i801.o
  19. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-i810.o
  20. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-isa.o
  21. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-piix4.o
  22. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-savage4.o
  23. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-sis5595.o
  24. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-via.o
  25. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-viapro.o
  26. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/i2c-voodoo3.o
  27. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/it87.o
  28. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/lm75.o
  29. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/lm78.o
  30. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/lm80.o
  31. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/lm87.o
  32. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/lm92.o
  33. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/ltc1710.o
  34. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/matorb.o
  35. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/maxilife.o
  36. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/mtp008.o
  37. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/pcf8574.o
  38. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/pcf8591.o
  39. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/sis5595.o
  40. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/smbus-arp.o
  41. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/smsc47m1.o
  42. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/thmc50.o
  43. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/via686a.o
  44. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/vt1211.o
  45. depmod: *** Unresolved symbols in /lib/modules/2.4.19-gentoo-r5/misc/w83781d.o

 
 
 

Code :
  1. zero i2o # modprobe i2c-i810
  2. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i810.o: unresolved symbol i2c_bit_add_bus_R8c3bc60e
  3. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i810.o: unresolved symbol i2c_bit_del_bus_R92b18f49
  4. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i810.o: insmod /lib/modules/2.4.19-gentoo-r5/misc/i2c-i810.o failed
  5. /lib/modules/2.4.19-gentoo-r5/misc/i2c-i810.o: insmod i2c-i810 failed

 
 
y a tellement de truc dans tous les sens que je ne sais pas par quoi commencer  :D  
 
une petite idee ?

Forum MesDiscussions.Net, Version 2010.2
(c) 2000-2011 Doctissimo

Copyright © 1997-2025 Groupe LDLC (Signaler un contenu illicite / Données personnelles)