tout est dit.
 
Je vois pas où est le stress. J'ai les même warnings avec les data et ça passe.
 
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'Goldstar'
Identifikation : 'CD-RW CED-8042B '
Revision       : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1024000 = 1000 KB
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
Track 01: audio  42 MB (04:13.38) no preemp pad
Track 02: audio  76 MB (07:36.01) no preemp pad
Track 03: audio  63 MB (06:15.71) no preemp pad
Track 04: audio  51 MB (05:04.74) no preemp pad
Track 05: audio  62 MB (06:12.29) no preemp pad
Track 06: audio  42 MB (04:09.99) no preemp pad
Track 07: audio  59 MB (05:50.85) no preemp pad
Track 08: audio  54 MB (05:24.23) no preemp pad
Track 09: audio  47 MB (04:43.29) no preemp pad
Track 10: audio  75 MB (07:30.37) no preemp pad
Track 11: audio  41 MB (04:06.98) no preemp pad
Track 12: audio  33 MB (03:19.57) no preemp pad
Track 13: audio  39 MB (03:54.13) no preemp pad
Track 14: audio  32 MB (03:12.49) no preemp pad
Lout start:     727 MB (72:02/17) = 324017 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11078 (97:34/22)
  ATIP start of lead out: 336075 (74:43/00)
  speed low: 0 speed high: 4
  power mult factor: 3 5
  recommended erase/write power: 3
  A2 values: 00 00 00
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 12058
Starting to write CD/DVD at speed 4 in write mode for single session.
Performing OPC...
 Track 01:   0 of  42 MB written.
write track data: error after 0 bytes
Writing  time:    5.030s

il semblerait que mon graveur préfère le DAO au TAO  
 
j'avais cru comprendre que le DAO était moins 'compatible' mais bon, ca à l'air de marché. Enfin, y a dummy qui bosse

[edtdd]--Message édité par 911GT3--[/edtdd]

c'est surtout la DAO RAW qui pose pb (technique utilisé notamment par cloneCd pour faire des copies parfaites).
 
JoWiLe>  Moi aussi, je n'avais pas compris le sens de dummy. Pourtant on en parlait dans une série que j'adore (Evangelion et la dummy plug).

 
bon, ba ca roulaize