Pabe Misère, misère... | Voici XFConfig
Code :
- # File generated by xf86config.
- #
- # Copyright (c) 1999 by The XFree86 Project, Inc.
- #
- # Permission is hereby granted, free of charge, to any person obtaining a
- # copy of this software and associated documentation files (the "Software" ),
- # to deal in the Software without restriction, including without limitation
- # the rights to use, copy, modify, merge, publish, distribute, sublicense,
- # and/or sell copies of the Software, and to permit persons to whom the
- # Software is furnished to do so, subject to the following conditions:
- #
- # The above copyright notice and this permission notice shall be included in
- # all copies or substantial portions of the Software.
- #
- # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
- # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- # SOFTWARE.
- #
- # Except as contained in this notice, the name of the XFree86 Project shall
- # not be used in advertising or otherwise to promote the sale, use or other
- # dealings in this Software without prior written authorization from the
- # XFree86 Project.
- #
- # **********************************************************************
- # Refer to the XF86Config(4/5) man page for details about the format of
- # this file.
- # **********************************************************************
- # **********************************************************************
- # Module section -- this section is used to specify
- # which dynamically loadable modules to load.
- # **********************************************************************
- #
- Section "Module"
- # This loads the DBE extension module.
- Load "dbe" # Double buffer extension
- # This loads the miscellaneous extensions module, and disables
- # initialisation of the XFree86-DGA extension within that module.
- SubSection "extmod"
- Option "omit xfree86-dga" # don't initialise the DGA extension
- EndSubSection
- # This loads the Type1 and FreeType font modules
- Load "type1"
- Load "freetype"
- # This loads the GLX module
- # Load "glx"
- EndSection
- # **********************************************************************
- # Files section. This allows default font and rgb paths to be set
- # **********************************************************************
- Section "Files"
- # The location of the RGB database. Note, this is the name of the
- # file minus the extension (like ".txt" or ".db" ). There is normally
- # no need to change the default.
- RgbPath "/usr/X11R6/lib/X11/rgb"
- # Multiple FontPath entries are allowed (which are concatenated together),
- # as well as specifying multiple comma-separated entries in one FontPath
- # command (or a combination of both methods)
- #
- # If you don't have a floating point coprocessor and emacs, Mosaic or other
- # programs take long to start up, try moving the Type1 and Speedo directory
- # to the end of this list (or comment them out).
- #
- # FontPath "/usr/X11R6/lib/X11/fonts/local/"
- FontPath "/usr/X11R6/lib/X11/fonts/misc/"
- FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
- FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
- FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
- FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
- FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
- FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
- # The module search path. The default path is shown here.
- # ModulePath "/usr/X11R6/lib/modules"
- EndSection
- # **********************************************************************
- # Server flags section.
- # **********************************************************************
- Section "ServerFlags"
- # Uncomment this to cause a core dump at the spot where a signal is
- # received. This may leave the console in an unusable state, but may
- # provide a better stack trace in the core dump to aid in debugging
- # Option "NoTrapSignals"
- # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
- # This allows clients to receive this key event.
- # Option "DontZap"
- # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
- # sequences. This allows clients to receive these key events.
- # Option "Dont Zoom"
- # Uncomment this to disable tuning with the xvidtune client. With
- # it the client can still run and fetch card and monitor attributes,
- # but it will not be allowed to change them. If it tries it will
- # receive a protocol error.
- # Option "DisableVidModeExtension"
- # Uncomment this to enable the use of a non-local xvidtune client.
- # Option "AllowNonLocalXvidtune"
- # Uncomment this to disable dynamically modifying the input device
- # (mouse and keyboard) settings.
- # Option "DisableModInDev"
- # Uncomment this to enable the use of a non-local client to
- # change the keyboard or mouse settings (currently only xset).
- # Option "AllowNonLocalModInDev"
- EndSection
- # **********************************************************************
- # Input devices
- # **********************************************************************
- # **********************************************************************
- # Core keyboard's InputDevice section
- # **********************************************************************
- Section "InputDevice"
- Identifier "Keyboard1"
- Driver "Keyboard"
- # For most OSs the protocol can be omitted (it defaults to "Standard" ).
- # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
- # uncomment the following line.
- # Option "Protocol" "Xqueue"
- Option "AutoRepeat" "500 30"
- # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
- # Option "Xleds" "1 2 3"
- # Option "LeftAlt" "Meta"
- # Option "RightAlt" "ModeShift"
- # To customise the XKB settings to suit your keyboard, modify the
- # lines below (which are the defaults). For example, for a non-U.S.
- # keyboard, you will probably want to use:
- # Option "XkbModel" "pc102"
- # If you have a US Microsoft Natural keyboard, you can use:
- # Option "XkbModel" "microsoft"
- #
- # Then to change the language, change the Layout setting.
- # For example, a german layout can be obtained with:
- # Option "XkbLayout" "de"
- # or:
- # Option "XkbLayout" "de"
- # Option "XkbVariant" "nodeadkeys"
- #
- # If you'd like to switch the positions of your capslock and
- # control keys, use:
- # Option "XkbOptions" "ctrl:swapcaps"
- # These are the default XKB settings for XFree86
- # Option "XkbRules" "xfree86"
- # Option "XkbModel" "pc101"
- # Option "XkbLayout" "us"
- # Option "XkbVariant" ""
- # Option "XkbOptions" ""
- # Option "XkbDisable"
- Option "XkbRules" "xfree86"
- Option "XkbModel" "pc101"
- Option "XkbLayout" "ca_enhanced"
- EndSection
- # **********************************************************************
- # Core Pointer's InputDevice section
- # **********************************************************************
- Section "InputDevice"
- # Identifier and driver
- Identifier "Mouse1"
- Driver "mouse"
- Option "Protocol" "PS/2"
- Option "Device" "/dev/mouse"
- # When using XQUEUE, comment out the above two lines, and uncomment
- # the following line.
- # Option "Protocol" "Xqueue"
- # Baudrate and SampleRate are only for some Logitech mice. In
- # almost every case these lines should be omitted.
- # Option "BaudRate" "9600"
- # Option "SampleRate" "150"
- # Emulate3Buttons is an option for 2-button Microsoft mice
- # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
- # Option "Emulate3Buttons"
- # Option "Emulate3Timeout" "50"
- # ChordMiddle is an option for some 3-button Logitech mice
- # Option "ChordMiddle"
- EndSection
- # **********************************************************************
- # Other input device sections
- # this is optional and is required only if you
- # are using extended input devices. This is for example only. Refer
- # to the XF86Config man page for a description of the options.
- # **********************************************************************
- #
- # Section "InputDevice"
- # Identifier "Mouse2"
- # Driver "mouse"
- # Option "Protocol" "MouseMan"
- # Option "Device" "/dev/mouse2"
- # EndSection
- #
- # Section "InputDevice"
- # Identifier "spaceball"
- # Driver "magellan"
- # Option "Device" "/dev/cua0"
- # EndSection
- #
- # Section "InputDevice"
- # Identifier "spaceball2"
- # Driver "spaceorb"
- # Option "Device" "/dev/cua0"
- # EndSection
- #
- # Section "InputDevice"
- # Identifier "touchscreen0"
- # Driver "microtouch"
- # Option "Device" "/dev/ttyS0"
- # Option "MinX" "1412"
- # Option "MaxX" "15184"
- # Option "MinY" "15372"
- # Option "MaxY" "1230"
- # Option "ScreenNumber" "0"
- # Option "ReportingMode" "Scaled"
- # Option "ButtonNumber" "1"
- # Option "SendCoreEvents"
- # EndSection
- #
- # Section "InputDevice"
- # Identifier "touchscreen1"
- # Driver "elo2300"
- # Option "Device" "/dev/ttyS0"
- # Option "MinX" "231"
- # Option "MaxX" "3868"
- # Option "MinY" "3858"
- # Option "MaxY" "272"
- # Option "ScreenNumber" "0"
- # Option "ReportingMode" "Scaled"
- # Option "ButtonThreshold" "17"
- # Option "ButtonNumber" "1"
- # Option "SendCoreEvents"
- # EndSection
- # **********************************************************************
- # Monitor section
- # **********************************************************************
- # Any number of monitor sections may be present
- Section "Monitor"
- Identifier "IBM_P200"
- # HorizSync is in kHz unless units are specified.
- # HorizSync may be a comma separated list of discrete values, or a
- # comma separated list of ranges of values.
- # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
- # USER MANUAL FOR THE CORRECT NUMBERS.
- HorizSync 31.5 - 79.0
- # HorizSync 30-64 # multisync
- # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
- # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
- # VertRefresh is in Hz unless units are specified.
- # VertRefresh may be a comma separated list of discrete values, or a
- # comma separated list of ranges of values.
- # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
- # USER MANUAL FOR THE CORRECT NUMBERS.
- VertRefresh 50-70
- EndSection
- # **********************************************************************
- # Graphics device section
- # **********************************************************************
- # Any number of graphics device sections may be present
- # Standard VGA Device:
- Section "Device"
- Identifier "Standard VGA"
- VendorName "Unknown"
- BoardName "Unknown"
- # The chipset line is optional in most cases. It can be used to override
- # the driver's chipset detection, and should not normally be specified.
- # Chipset "generic"
- # The Driver line must be present. When using run-time loadable driver
- # modules, this line instructs the server to load the specified driver
- # module. Even when not using loadable driver modules, this line
- # indicates which driver should interpret the information in this section.
- Driver "vga"
- # The BusID line is used to specify which of possibly multiple devices
- # this section is intended for. When this line isn't present, a device
- # section can only match up with the primary video device. For PCI
- # devices a line like the following could be used. This line should not
- # normally be included unless there is more than one video device
- # intalled.
- # BusID "PCI:0:10:0"
- # VideoRam 256
- # Clocks 25.2 28.3
- EndSection
- # Device configured by xf86config:
- Section "Device"
- Identifier "GeForce4"
- Driver "vga"
- # unsupported card
- #VideoRam 128000
- # Insert Clocks lines here if appropriate
- EndSection
- # **********************************************************************
- # Screen sections
- # **********************************************************************
- # Any number of screen sections may be present. Each describes
- # the configuration of a single screen. A single specific screen section
- # may be specified from the X server command line with the "-screen"
- # option.
- Section "Screen"
- Identifier "Screen 1"
- Device "GeForce4"
- Monitor "IBM_P200"
- DefaultDepth 16
- Subsection "Display"
- Depth 8
- Modes "640x480" "800x600" "1024x768" "1280x1024"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 16
- Modes "640x480" "800x600" "1024x768" "1280x1024"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 24
- Modes "640x480" "800x600" "1024x768" "1280x1024"
- ViewPort 0 0
- EndSubsection
- EndSection
- # **********************************************************************
- # ServerLayout sections.
- # **********************************************************************
- # Any number of ServerLayout sections may be present. Each describes
- # the way multiple screens are organised. A specific ServerLayout
- # section may be specified from the X server command line with the
- # "-layout" option. In the absence of this, the first section is used.
- # When now ServerLayout section is present, the first Screen section
- # is used alone.
- Section "ServerLayout"
- # The Identifier line must be present
- Identifier "Simple Layout"
- # Each Screen line specifies a Screen section name, and optionally
- # the relative position of other screens. The four names after
- # primary screen name are the screens to the top, bottom, left and right
- # of the primary screen. In this example, screen 2 is located to the
- # right of screen 1.
- Screen "Screen 1"
- # Each InputDevice line specifies an InputDevice section name and
- # optionally some options to specify the way the device is to be
- # used. Those options include "CorePointer", "CoreKeyboard" and
- # "SendCoreEvents".
- InputDevice "Mouse1" "CorePointer"
- InputDevice "Keyboard1" "CoreKeyboard"
- EndSection
|
|
