G pas encore tester c'est juste pour l'info...
 
 
http://forum.ocworkbench.com/ocwbc [...] 7&t=003724
 
----------------------------------------------------
CheepoBios 1.02 Beta for K7S5A
Based on PcChips 020626
 
chb0626.rom  non-lan Version
chb0626l.rom  lan version
chb0626f.rom  lan version with fastwrites enabled (disable lan in bios Setup to use it on   a non-lan board)
 
Release notes:
 
- Adjust timing for stability and compatibility
 
- FSB modes reprogrammed:
 
 "100/100 MHz" changed from 99.6 to 100.9 MHz
 "133/133 MHz" changed from 132.77 to 133.9 MHz
 No more underclocking by default!  
 
- Several FSB modes added. New list of available modes:
 
 100/100 MHz
 100/133 MHz
 133/133 MHz -> Default modes
 
 66/66 MHz (H/W Trap)
 112/112 MHz
 124/124 MHz
 138/138 MHz (reprogrammed from 137.3 to 138.0)
 150/150 MHz
 166/166 MHz -> Already present in the "OC" bios
 
 110/110 MHz  
 133/100 MHz
 143/143 MHz
 147/147 MHz
 133/166 MHz
 160/120 MHz
 200/200 MHz
 
 Please note that the "166 MHz no-boot issue" hasn't been dealt with
 in this bios modification. It seems that bios timings need to be adjusted to allow
  booting at such speed. This issue could also affect 160/120 and 200/200
 settings.
 
- Extra memory settings:
 - RAS Precharge Time=2T
 - RAS Active Time=4T, 5T
 
- Full screen logo can be enabled/disabled via bios menu
 
- A few hidden bios options have been enabled with amibcp. Please notice that none of these settings have been fixed or reprogrammed at all.
 
 - PCI Latency Timer
  - PCI IDE busmaster
 - PCI slot #1 to #4 IRQ priority
 - IO APIC
 
The default values for these settings, as well as all other settings, remain the same as in the original bios.
I wish to thank Jinxter, tw.p, Bench400 and Beheerder: deblokker mij, fellow bios modders
at www.ocworkbench.com/ecs for their useful ideas, discussion and testing
 
 
Cheepoman 07 July 2002  
 
   
 

hehe on va voir pentier debouler ds qqe secondes  

Attention c'est une version beta, lire son post...
 
The 0626 bios core has a new bios option, Memory Termination, which seems to be aimed at solving the ghost memory issue. Strangely enough, this is a "ghost setting" itself, as even if you enable it with amibcp, it doesn't show up when you flash the bios...  
 
  I have that bios running right now and I'm 99% confident it's ok, but whoever wants to use it please remember it's at your own risk...

Coucou Pentier    
 
 

pentier doit etre en vacances,pas possib' qu'il se soit fait griller

griller par koi ?
 
 

pcever a écrit a écrit : griller par koi ?

par toi pour la news du bios

pentier  

 et il apporte quoi de plus, je vois pas    En plus il est basé sur le bios des cartes PCChips et non ECS    Bon ok, c'est les mêmes cartes mais bon...
 
Et puis, j'ai autre chose à faire pour le moment    (voir signature)

merci de l'info    
 
 

bon...kk'1 a essayé ce bios?
paskeu g la flemme de le foutre pour rien...
mais si on peut désynchroo la ram...

ca voudrait dire ke la désynchro 133/166 marcherait ca non?

Y a deja un 'pik unik' .