Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
2130 connectés 

  FORUM HardWare.fr
  Hardware

  mon xp1.8 m'enmerde :(((((

 


 Mot :   Pseudo :  
 
 Page :   1  2
Page Précédente
Auteur Sujet :

mon xp1.8 m'enmerde :(((((

n°1203859
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:16:36  profilanswer
 

salut tlm :)
 
j'ai un gros prob avec mon amd xp 1.8...
je suis oblige de la mettre à 1153 en frequence ds le bios pour eviter les freeze et les bloquages reguliers :(
g bien mis à jour tout mes drivers, j'ai ouvert la tour,g un ventilo de bonne facture(alpha pal 3035 muc) et il n'y a rien a faire, des que je le mets à 1533 ds le bios, ou bout d'un moment, tout se fige et je suis oblige de rebooter  :gun:  
 
klekun peut m'aider svp??? si je ramene ma tour au sav, c pas garantie que le nouveau proc qu'il vont me fourguer marche, car à priori, d'apres un tech, je ne suis pas le seul à avoir ce prob...en tout cas, apres 10 ans avec des pentium...je crois que g fait une belle connerie de prendre un athlon  :gun:  
 
@++  
ps: je suis sous xp pro


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
mood
Publicité
Posté le 20-02-2002 à 13:16:36  profilanswer
 

n°1203871
Prems
Just a lie
Posté le 20-02-2002 à 13:18:40  profilanswer
 

2 choses :  
 
1) Soit t'es pas foutu de monter un ventilo.
2) Soit le matos est effectivemment défectueux (CM ou processeur) et tu le fais changer.
 
Mais bon, si tu désespères déjà on peut rien pour toi.


---------------
Ratures - Cuisine
n°1203872
cristobald
Posté le 20-02-2002 à 13:18:48  profilanswer
 

la RAM, la RAM, toujours la RAM et encore la RAM...

n°1203873
Prems
Just a lie
Posté le 20-02-2002 à 13:19:31  profilanswer
 

Désolé, j'avais pas vu les 1 Go de RAM  :D


---------------
Ratures - Cuisine
n°1203876
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:20:06  profilanswer
 

le ventilo, est tres bien monte...le prob ne vient pas de la et la ddr marche aussi, vu que je l'ai change deja à 2 reprises et le prob persiste...


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203877
nolimites
Z'avez pas vu Mirza?
Posté le 20-02-2002 à 13:20:28  profilanswer
 

ton pal suit pas c pour ca sa limite c le 1700 donc :p


---------------
[:xx_xx] "Imagination is more important than knowlegde" citation de Albert Einstein qui prend tout son sens dans notre monde actuel [:xx_xx]  
n°1203878
AMG
Watercooled :D
Posté le 20-02-2002 à 13:20:30  profilanswer
 

bah ptet ke si tu nnou donnais les tempéraures on pourrais faire qqch  :sarcastic:


---------------
www.wizit.fr
n°1203884
johanh
Posté le 20-02-2002 à 13:21:39  profilanswer
 

lorenzoo a écrit a écrit :

le ventilo, est tres bien monte...le prob ne vient pas de la et la ddr marche aussi, vu que je l'ai change deja à 2 reprises et le prob persiste...  




 
La RAM n'est pas "overclockée" au niveau des timing ? (CAS 2 au lieu de 3 etc.)

n°1203888
Prems
Just a lie
Posté le 20-02-2002 à 13:21:58  profilanswer
 

nolimites a écrit a écrit :

ton pal suit pas c pour ca sa limite c le 1700 donc :p  




 
Déjà, oui.
 
Et tu as combien de barettes de RAM ?
 
Elle serait pas overclockée "accidentellement" à 166MHz par hasard?


---------------
Ratures - Cuisine
n°1203892
AMG
Watercooled :D
Posté le 20-02-2002 à 13:22:32  profilanswer
 

Johanh a écrit a écrit :

 
 
La RAM n'est pas "overclockée" au niveau des timing ? (CAS 2 au lieu de 3 etc.)  



en DDR c de la ram cas 2.5 par default ...


---------------
www.wizit.fr
mood
Publicité
Posté le 20-02-2002 à 13:22:32  profilanswer
 

n°1203893
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:22:37  profilanswer
 

le ventilo ne suis pas?? bein on m'aurait menti alors :(
 
aussi non, comment puis je vous donne la temperature?
g installe motherboard monitor 5 mais je suis un peu pomme  :pt1cable:


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203897
AMG
Watercooled :D
Posté le 20-02-2002 à 13:23:41  profilanswer
 

lorenzoo a écrit a écrit :

le ventilo ne suis pas?? bein on m'aurait menti alors :(
 
aussi non, comment puis je vous donne la temperature?
g installe motherboard monitor 5 mais je suis un peu pomme  :pt1cable:  




tu sais pas le configurer ?
sensor 1
via ... 1
sensor 2
via ... 2
;)


---------------
www.wizit.fr
n°1203902
Jazz Ad
Celui-là même.
Posté le 20-02-2002 à 13:24:09  profilanswer
 

:love: S'il t"emmerde autant que ça, envoie le moi pour un test complet, je vais régler ça en quelques années.  :love:


---------------
Mon feed
n°1203903
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:24:17  profilanswer
 

mais j'insiste que le prob ne vient pas de la ram vu que g aucun souci quand je change la frequence du proc a 1153 je crois ou un truc ds le genre  :heink:


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203907
Prems
Just a lie
Posté le 20-02-2002 à 13:24:41  profilanswer
 

Ah, VIA HM c'est tellement pratique.
 
Je comprends pas qu'Asus le désactive dans le BIOS.


---------------
Ratures - Cuisine
n°1203908
AMG
Watercooled :D
Posté le 20-02-2002 à 13:25:06  profilanswer
 
n°1203910
Prems
Just a lie
Posté le 20-02-2002 à 13:25:11  profilanswer
 

lorenzoo a écrit a écrit :

mais j'insiste que le prob ne vient pas de la ram vu que g aucun souci quand je change la frequence du proc a 1153 je crois ou un truc ds le genre  :heink:  




 
En fait tu passes le bus système de 100 à 133 donc la RAM aussi.


---------------
Ratures - Cuisine
n°1203928
martin-vig​nerte
Posté le 20-02-2002 à 13:28:34  profilanswer
 

Hop j'ai PEUT-ETRE ta solution :hello:  
j'ai un XP 1700 et par défaut, il était à 1100 Mhz et la modification du bus n'y changeait rien, il plantait à 1300 Mhz (au lieu des 1460 normaux)
En fait, ca venait d'un jumper sur ma CM. Vérifie donc dans ta doc si tu n'a pas un jumper réglé par défaut à 100 Mhz et met le à 133
ET RULEEZZZ :bounce:

n°1203930
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:29:06  profilanswer
 

===>>>Ah, VIA HM c'est tellement pratique.  
 
Je comprends pas qu'Asus le désactive dans le BIOS.  
 
c a dire???
 
===>>>tu sais pas le configurer ?  
sensor 1  
via ... 1  
sensor 2  
via ... 2  
 
tu peux developper??? je change ces parametres ou avec MM5???
 
merci  :jap:


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203939
martin-vig​nerte
Posté le 20-02-2002 à 13:30:48  profilanswer
 

Tu réponds à qui  :??:

n°1203947
AMG
Watercooled :D
Posté le 20-02-2002 à 13:32:16  profilanswer
 

dans parametres .. :*D


---------------
www.wizit.fr
n°1203948
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:32:25  profilanswer
 

ok je vais verifier le jumper et i come back merci :)


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203954
Melfice
Posté le 20-02-2002 à 13:33:27  profilanswer
 

:fuck: je suis ingénieur informatitien :fuck:


---------------
#Docteurs | MeLfiCe .::. d0c * MeL
n°1203963
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:34:55  profilanswer
 

v'la un petit releve mais je suis a 1.16  
+-------------------------------------------------------------------------+
|Nombre total de mesures: 6101           Fréquence CPU: 1162 MHz          |
|Actif depuis: 19/02/2002 20:37:01       Jusqu'à: 20/02/2002 13:34:13     |
+-----------------------------+----------+----------+----------+----------+
|Sonde                        | Actuel   | Bas      | Haut     | Moyenne  |
+-----------------------------+----------+----------+----------+----------+
|Sensor 1                     | 0° C     | 0° C     | 0° C     | 0° C     |
|Sensor 2                     | 0° C     | 0° C     | 0° C     | 0° C     |
|Sensor 3                     | 0° C     | 0° C     | 0° C     | 0° C     |
|Core 0                       | 1,79 V   | 1,76 V   | 1,81 V   | 1,79 V   |
|Core 1                       | 2,56 V   | 2,56 V   | 2,58 V   | 2,56 V   |
|+3.3                         | 3,26 V   | 3,25 V   | 3,30 V   | 3,28 V   |
|+5.00                        | 4,97 V   | 4,89 V   | 5,00 V   | 4,96 V   |
|+12.00                       | 12,52 V  | 12,40 V  | 12,71 V  | 12,54 V  |
|-12.00                       | -12,19 V | -12,44 V | -12,19 V | -12,22 V |
|-5.00                        | -5,29 V  | -5,44 V  | -5,29 V  | -5,32 V  |
|Fan 1                        | 5273 RPM | 5273 RPM | 5357 RPM | 5305 RPM |
|Fan 2                        | 0 RPM    | 0 RPM    | 0 RPM    | 0 RPM    |
|Fan 3                        | 0 RPM    | 0 RPM    | 0 RPM    | 0 RPM    |
+-----------------------------+----------+----------+----------+----------+


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203976
martin-vig​nerte
Posté le 20-02-2002 à 13:36:56  profilanswer
 

T'as essayé le jumper dont on a parlé ?

n°1203978
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:37:11  profilanswer
 

non j'essai now :)


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1203992
AMG
Watercooled :D
Posté le 20-02-2002 à 13:39:54  profilanswer
 

ya pas les temp ..... mest un autre porgz suit u sait pas ten servir !!!


---------------
www.wizit.fr
n°1204014
narzo
Posté le 20-02-2002 à 13:43:59  profilanswer
 

et bien pour moi vous allez vous marrer car qd je passe mon xp 1900 à xp 1500 ou sup et bien qd je reboot, j'ai l'écran noir et impossible de rentrer dans le bios, c pas zarb ce truc.
 
Maintenant y'a peut-être un autre truc à faire avant de reboot :)

n°1204082
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:55:37  profilanswer
 

bon j'ai essayer de changer à 133 sur la cm, et g un ecran noir :( à 115 aussi :(


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1204100
martin-vig​nerte
Posté le 20-02-2002 à 13:58:15  profilanswer
 

T'as modifié la vitesse du bus par un jumper sur la mobo ?

n°1204101
AMG
Watercooled :D
Posté le 20-02-2002 à 13:58:18  profilanswer
 

donne nous tes temps avec un autre prog !!


---------------
www.wizit.fr
n°1204106
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 13:59:21  profilanswer
 

j'ai bien changer le jumper sur 133 kenini, ecran noir :(
kel autre prob pour la temp??? merci :)


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1204113
AMG
Watercooled :D
Posté le 20-02-2002 à 14:00:55  profilanswer
 

hardware monitor pro ( un truc come ca )


---------------
www.wizit.fr
n°1204118
Melfice
Posté le 20-02-2002 à 14:01:39  profilanswer
 

:fuck: je suis ingénieur informatitien :fuck:

 

[jfdsdjhfuetppo]--Message édité par Melfice--[/jfdsdjhfuetppo]


---------------
#Docteurs | MeLfiCe .::. d0c * MeL
n°1204122
martin-vig​nerte
Posté le 20-02-2002 à 14:02:07  profilanswer
 

Et tu as regardé la fréquence de démarrage que ca t'as donné avec le bus à 133 ?

n°1204184
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 14:12:47  profilanswer
 

voila un petit report, si ca peut vous aider:
 
 
  < Entire System >
    Manufacturer:                         System Manufacturer
    Model:                                System Name
    Version:                              System Version
    Serial Number:                        SYS-1234567890
    Unique ID:                            00000000-00000000-00000000-00000000
 
  < System Chassis >
    Manufacturer:                         Chassis Manufacture
    Case Type:                            Tower
    Can be locked:                        No
    Version:                              Chassis Version
    Serial Number:                        Chassis Serial Number
    Asset Tag Number:                     Asset-1234567890
    Boot-up State:                        Safe
    Power State:                          Safe
    Thermal State:                        Safe
 
  < System Mainboard >
    Manufacturer:                         ASUSTeK Computer INC.
    MP Support:                           No
    Model:                                <A7M266>
    Version:                              REV 1.xx
    Serial Number:                        xxxxxxxxxxx
    BIOS ID:                              10/03/2001-AMD
 
  < On-board Devices >
    CMedia CM18738:                       Sound Device
    3Com 920-ST01:                        Ethernet Adapter
 
  < System Memory Controller >
    Location:                             Mainboard
    Error Correction Capability:          None
    Number of Memory Slots:               2
    Maximum Installable Memory:           1024MB
    Bank 1 - DIMM 1:                      DIMM Synchronous DRAM 512MB/72
    Bank 2 - DIMM 2:                      DIMM Synchronous DRAM 512MB/72
    Bank 3 - DIMM 3:                      Empty
    Bank 4 - DIMM 4:                      Empty
 
  < System Chipset >
    Model:                                Advanced Micro Devices (AMD) AMD-761 CPU to PCI Bridge
    Bus(es):                              AGP PCI USB SMBus/i2c  
    Front Side Bus Speed:                 2x 133MHz (266MHz data rate)
    In Order Queue Depth:                 8 req(s)
 
  < Logical/Chipset Memory Banks >
    Bank 0 Setting:                       256MB DDR-SDRAM 7-1-1-1R 6-1-1-1W 2.5-3-3CL 2CMD
    Bank 1 Setting:                       256MB DDR-SDRAM 7-1-1-1R 6-1-1-1W 2.5-3-3CL 2CMD
    Bank 2 Setting:                       256MB DDR-SDRAM 7-1-1-1R 6-1-1-1W 2.5-3-3CL 2CMD
    Bank 3 Setting:                       256MB DDR-SDRAM 7-1-1-1R 6-1-1-1W 2.5-3-3CL 2CMD
    Speed:                                2x 133MHz (266MHz data rate)
    Multiplier:                           1/1x
    Refresh Rate:                         7.68µs
    Power Down Mode:                      No
    Fixed Hole Present:                   No
 
  < Memory Modules >
    Memory Module 1:                      512MB 16x(32Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5  
                                          upto 133MHz) (CL2 upto 100MHz)
    Memory Module 2:                      512MB 16x(32Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5  
                                          upto 133MHz) (CL2 upto 100MHz)
 
  < System Clock Generator >
    Model:                                ICS 94225
    Software Programmable:                Yes
    Read-Back Support:                    Yes
    Speed Selected By:                    Software
    Spread Spectrum Modulated:            No
    No FSB Speeds:                        32
    FSB Speed Range:                      90 - 150MHz
 
  < Environment Monitor 1 >
    Model:                                Winbond W83782D SMB
    Version:                              3.01
    Mainboard Specific Support:           No
 
  < Temperature Sensor(s) >
    Board Temperature:                    28.0°C / 82.4°F
    CPU Temperature:                      49.0°C / 120.2°F
 
  < Cooling Device(s) >
    Auto Fan Speed Control:               No
    CPU Fan Speed:                        5357rpm
 
  < Voltage Sensor(s) >
    CPU Core Voltage:                     1.79V
    Aux Voltage:                          2.56V
    +3.3V Voltage:                        3.28V
    +5V Voltage:                          4.95V
    +12V Voltage:                         12.59V
    -12V Voltage:                         -12.28V
    -5V Voltage:                          -5.35V
 
  < AGP Bus >
    Version:                              2.00
    Speed:                                66MHz
    Current Data Transfer Rate:           4x 66MHz (264MHz data rate)
    Side Band Enabled:                    No
    Side Band Support:                    Yes
    Fast-Writes Enabled:                  No
    Fast-Writes Support:                  Yes
    Aperture Size:                        64MB
 
  < PCI Bus(es) >
    Version:                              2.10
    No Buses:                             1
    No Bridges:                           1
    Speed:                                33MHz
    Multiplier:                           1/4x
 
  < LPC Hub Controller 1 >
    Model:                                VIA Technologies Inc VT82C686/A/B PCI to ISA Bridge
    ACPI PM Enabled:                      Yes
    Random Number Generator Enabled:      No
    Speed Multiplier:                     1/4x
    Speed:                                8MHz
    DMA Multiplier:                       1/2x
    DMA Speed:                            4MHz
 
  < USB Controller 1 >
    Model:                                VIA Technologies Inc VT83C572,VT82C586/A/B,VT82C596B,
                                          VT82C686A USB Controller
    Version:                              1.10
    UHCI Interface:                       Yes
    Channels:                             2
    Speed:                                48MHz
    Legacy Emulation Enabled:             No
 
  < USB Controller 2 >
    Model:                                VIA Technologies Inc VT83C572,VT82C586/A/B,VT82C596B,
                                          VT82C686A USB Controller
    Version:                              1.10
    UHCI Interface:                       Yes
    Channels:                             2
    Speed:                                48MHz
    Legacy Emulation Enabled:             No
 
  < System SMBus Controller 1 >
    Model:                                Intel PIIX4 SMBus / compatible
    Version:                              4.00
    Speed:                                16kHz
    Multiplexor:                          Asus IO mux
 
  < Expansion Slot(s) >
    PCI 1 (1h):                           PCI 32-bit 5V 3.3V PME HalfLength Available (Advanced  
                                          Micro Devices (AMD) AMD-761 CPU to AGP Bridge (AGP  
                                          4x))
    PCI 2 (2h):                           PCI 32-bit 5V 3.3V PME HalfLength InUse
    PCI 3 (3h):                           PCI 32-bit 5V 3.3V PME HalfLength InUse
    PCI 4 (4h):                           PCI 32-bit 5V 3.3V PME HalfLength Available (ASUSTeK  
                                          Computer Inc VIA Chipset-based Mainboard PCI to ISA  
                                          Bridge)
    PCI 5 (5h):                           PCI 32-bit 5V 3.3V PME HalfLength Available (ASUSTeK  
                                          Computer Inc CM8738 Audio )
    AGP (6h):                             AGP-4x 32-bit 5V 3.3V FullLength InUse
    AMR (7h):                             I/O Riser 32-bit 5V 3.3V FullLength Available
 
  < Port Connector(s) >
    PRIMARY IDE/HDD:                      None - ATA / None
    SECONDARY IDE/HDD:                    None - ATA / None
    FLOPPY:                               None - Floppy / None
    USB1:                                 USB - None / USB
    USB2:                                 USB - None / USB
    USB3:                                 USB - None / USB
    USB4:                                 USB - None / USB
    PS/2 Keybaord:                        Keyboard Port - None / PS/2
    PS/2 Mouse:                           Mouse Port - None / PS/2
    Parallel Port:                        Parallel Port ECP/EPP - None / DB25 pin female
    Serial Port 1:                        Serial Port 16550 Compatible - None / DB-9 pin male
    Serial Port 2:                        Serial Port 16550 Compatible - None / DB-9 pin male
    Joystick Port:                        Joystick Port - None / DB-15 pin female
    MIDI Port:                            MIDI Port - None / DB-15 pin female
    Line In Jack:                         Audio Port - None / Mini-jack
 
  < Performance Tips >
    Notice N224:                          SMBIOS/DMI information may be inaccurate.
    Warning W2507:                        Mainboard has too few memory slots. Upgrading the  
                                          memory may be difficult or expensive.
    Tip T2545:                            Large memory modules should be Registered/Buffered.
    Tip T2546:                            Large memory modules should be ECC/Parity.
    Tip T2548:                            Speed set by software. For reliability, consider by  
                                          jumpers/switch.
    Tip T2549:                            Spread spectrum is off. Consider turning it on to  
                                          minimise EMI.
    Tip T2:                               For more information about tips, press F1 and scroll  
                                          to the Tips section.
 
<<< CPU & BIOS Information >>>
--------------------------------------------------
----------------------------------------------
 
<< System BIOS >>
  < System BIOS >
    Manufacturer:                         Award Software, Inc.
    Version:                              ASUS A7M266 ACPI BIOS Revision 1005
    Date:                                 10/03/2001
    Plug & Play Version:                  1.00
    SMBIOS/DMI Version:                   2.30
    (EE)PROM Size:                        256kB  (2Mbit)
 
  < Features >
    Can be Updated (flashed):             Yes
    Can be Shadowed:                      Yes
    Is Socketed:                          Yes
    Supports APM:                         Yes
    Supports ACPI:                        Yes
    Supports Plug & Play:                 Yes
    Supports ESCD:                        Yes
    Supports Enhanced Disk Drive:         Yes
    Supports Selective Booting:           Yes
    Supports LS-120 Boot:                 No
    Supports ZIP Boot:                    No
    Supports BIOS Boot Block:             No
    Supports Network Boot:                No
    NEC PC-98 Spec Compatible:            No
 
  < Performance Tips >
    Notice N224:                          SMBIOS/DMI information may be inaccurate.
    Tip T212:                             BIOS can be shadowed so check whether it is.
    Tip T211:                             BIOS is flash-able and socketed so it can be upgraded  
                                          when needed.
    Tip T2:                               For more information about tips, press F1 and scroll  
                                          to the Tips section.
 
<< Processor 1 >>
  < Processor(s) >
    Model:                                AMD Athlon(TM) XP 1800+
    Co-Processor (FPU):                   Built-in
    Speed:                                1.53GHz
    Model Number:                         1800 (estimated)
    Performance Rating:                   PR2243 (estimated)
    Type:                                 Standard
    Multiplier:                           11.5x
    Generation:                           7th (7x86)
    Model Information:                    Duron M6/MP & Athlon 4/MP/XP (Palomino) 1G+ 1.7V
    Revision/Stepping:                    6 / 2 (0)
    Stepping Mask:                        A5
 
  < Caches >
    Internal Data Cache:                  64kB synchronous write-back (2-way, 64 byte line size)
    Internal Code Cache:                  64kB synchronous write-back (2-way, 64 byte line size)
    L2 On-board Cache:                    256kB ECC synchronous write-back (16-way, 64 byte line  
                                          size)
    L2 Cache Multiplier:                  1/1x  (equiv. 1533MHz)
 
  < Host Interface >
    Front Side Bus Speed:                 2x 133MHz (266MHz data rate)
 
  < Mainboard Upgradeability >
    Socket/Slot:                          SOCKET A
    Upgrade Interface:                    Other
    Supported Speed(s):                   1.80GHz  (or more)
    Supported Voltage(s):                 2.9V
 
  < Environment Monitor 1 >
    Model:                                Winbond W83782D SMB
    Version:                              3.01
    Mainboard Specific Support:           No
 
  < Processor Sensors >
    CPU Temperature:                      49.0°C / 120.2°F
    Auto Fan Speed Control:               No
    CPU Fan Speed:                        5357rpm
    CPU Core Voltage:                     1.76V
 
  < Features >
    Co-Processor (FPU) Built-in:          Yes
    Virtual Mode Extensions:              Yes
    Debugging Extension:                  Yes
    Page Size Extension:                  Yes
    Time Stamp Counter:                   Yes
    Model Specific Registers:             Yes
    Physical Address Extension:           Yes
    Machine Check Exception:              Yes
    Compare & Exchange Instruction:       Yes
    Local APIC Built-in:                  Yes
    Fast System Call:                     Yes
    Memory Type Range Registers:          Yes
    Page Global Enable:                   Yes
    Machine Check Architecture:           Yes
    Conditional Move Instruction:         Yes
    Page Attribute Table:                 Yes
    36-bit Page Size Extension:           Yes
    Unique Serial Number:                 No
    Cache Line Flush Support:             No
    Debug Trace & EMON Store:             No
    ACPI Technology:                      No
    MMX Technology:                       Yes
    Fast Float Save & Restore:            Yes
    SSE Technology:                       Yes
    SSE2 Technology:                      No
    Self Snoop:                           No
    Hyper-Threading Technology:           No
    Auto Clock Control:                   No
    IA-64 Technology:                     No
 
  < Extended Features >
    Extended Fast System Call:            Yes
    Extended AMD MMX Technology:          Yes
    3DNow! Technology:                    Yes
    Extended 3DNow! Technology:           Yes
    MP Capability:                        Yes
    AA-64 Technology:                     No
 
  < Power Management Features >
    Voltage Control:                      No
    Frequency Control:                    No
    Thermal Sensor Built-in:              Yes
 
  < Advanced Settings >
    Model Reprogram:                      Yes
    TLB Cacheable:                        Yes
 
  < Variable Range MTRR Settings >
    MTRR 0:                               00000000-3FFFFFFF (0MB-1024MB) WB
    MTRR 7:                               F8000000-FBFFFFFF (3968MB-4032MB) WC
 
  < Fixed Range MTRR Settings >
    MTRR 0 Range 0:                       00000000-0000FFFF (0kB-64kB) WB
    MTRR 0 Range 1:                       00010000-0001FFFF (64kB-128kB) WB
    MTRR 0 Range 2:                       00020000-0002FFFF (128kB-192kB) WB
    MTRR 0 Range 3:                       00030000-0003FFFF (192kB-256kB) WB
    MTRR 0 Range 4:                       00040000-0004FFFF (256kB-320kB) WB
    MTRR 0 Range 5:                       00050000-0005FFFF (320kB-384kB) WB
    MTRR 0 Range 6:                       00060000-0006FFFF (384kB-448kB) WB
    MTRR 0 Range 7:                       00070000-0007FFFF (448kB-512kB) WB
    MTRR 1 Range 0:                       00080000-00083FFF (512kB-528kB) WB
    MTRR 1 Range 1:                       00084000-00087FFF (528kB-544kB) WB
    MTRR 1 Range 2:                       00088000-0008BFFF (544kB-560kB) WB
    MTRR 1 Range 3:                       0008C000-0008FFFF (560kB-576kB) WB
    MTRR 1 Range 4:                       00090000-00093FFF (576kB-592kB) WB
    MTRR 1 Range 5:                       00094000-00097FFF (592kB-608kB) WB
    MTRR 1 Range 6:                       00098000-0009BFFF (608kB-624kB) WB
    MTRR 1 Range 7:                       0009C000-0009FFFF (624kB-640kB) WB
    MTRR 2 Range 0:                       000A0000-000A3FFF (640kB-656kB) UC
    MTRR 2 Range 1:                       000A4000-000A7FFF (656kB-672kB) UC
    MTRR 2 Range 2:                       000A8000-000ABFFF (672kB-688kB) UC
    MTRR 2 Range 3:                       000AC000-000AFFFF (688kB-704kB) UC
    MTRR 2 Range 4:                       000B0000-000B3FFF (704kB-720kB) UC
    MTRR 2 Range 5:                       000B4000-000B7FFF (720kB-736kB) UC
    MTRR 2 Range 6:                       000B8000-000BBFFF (736kB-752kB) UC
    MTRR 2 Range 7:                       000BC000-000BFFFF (752kB-768kB) UC
    MTRR 3 Range 0:                       000C0000-000C0FFF (768kB-772kB) UC
    MTRR 3 Range 1:                       000C1000-000C1FFF (772kB-776kB) UC
    MTRR 3 Range 2:                       000C2000-000C2FFF (776kB-780kB) UC
    MTRR 3 Range 3:                       000C3000-000C3FFF (780kB-784kB) UC
    MTRR 3 Range 4:                       000C4000-000C4FFF (784kB-788kB) UC
    MTRR 3 Range 5:                       000C5000-000C5FFF (788kB-792kB) UC
    MTRR 3 Range 6:                       000C6000-000C6FFF (792kB-796kB) UC
    MTRR 3 Range 7:                       000C7000-000C7FFF (796kB-800kB) UC
    MTRR 4 Range 0:                       000C8000-000C8FFF (800kB-804kB) UC
    MTRR 4 Range 1:                       000C9000-000C9FFF (804kB-808kB) UC
    MTRR 4 Range 2:                       000CA000-000CAFFF (808kB-812kB) UC
    MTRR 4 Range 3:                       000CB000-000CBFFF (812kB-816kB) UC
    MTRR 4 Range 4:                       000CC000-000CCFFF (816kB-820kB) UC
    MTRR 4 Range 5:                       000CD000-000CDFFF (820kB-824kB) UC
    MTRR 4 Range 6:                       000CE000-000CEFFF (824kB-828kB) UC
    MTRR 4 Range 7:                       000CF000-000CFFFF (828kB-832kB) UC
    MTRR 5 Range 0:                       000D0000-000D0FFF (832kB-836kB) UC
    MTRR 5 Range 1:                       000D1000-000D1FFF (836kB-840kB) UC
    MTRR 5 Range 2:                       000D2000-000D2FFF (840kB-844kB) UC
    MTRR 5 Range 3:                       000D3000-000D3FFF (844kB-848kB) UC
    MTRR 5 Range 4:                       000D4000-000D4FFF (848kB-852kB) UC
    MTRR 5 Range 5:                       000D5000-000D5FFF (852kB-856kB) UC
    MTRR 5 Range 6:                       000D6000-000D6FFF (856kB-860kB) UC
    MTRR 5 Range 7:                       000D7000-000D7FFF (860kB-864kB) UC
    MTRR 6 Range 0:                       000D8000-000D8FFF (864kB-868kB) UC
    MTRR 6 Range 1:                       000D9000-000D9FFF (868kB-872kB) UC
    MTRR 6 Range 2:                       000DA000-000DAFFF (872kB-876kB) UC
    MTRR 6 Range 3:                       000DB000-000DBFFF (876kB-880kB) UC
    MTRR 6 Range 4:                       000DC000-000DCFFF (880kB-884kB) UC
    MTRR 6 Range 5:                       000DD000-000DDFFF (884kB-888kB) UC
    MTRR 6 Range 6:                       000DE000-000DEFFF (888kB-892kB) UC
    MTRR 6 Range 7:                       000DF000-000DFFFF (892kB-896kB) UC
    MTRR 7 Range 0:                       000E0000-000E0FFF (896kB-900kB) UC
    MTRR 7 Range 1:                       000E1000-000E1FFF (900kB-904kB) UC
    MTRR 7 Range 2:                       000E2000-000E2FFF (904kB-908kB) UC
    MTRR 7 Range 3:                       000E3000-000E3FFF (908kB-912kB) UC
    MTRR 7 Range 4:                       000E4000-000E4FFF (912kB-916kB) UC
    MTRR 7 Range 5:                       000E5000-000E5FFF (916kB-920kB) UC
    MTRR 7 Range 6:                       000E6000-000E6FFF (920kB-924kB) UC
    MTRR 7 Range 7:                       000E7000-000E7FFF (924kB-928kB) UC
    MTRR 8 Range 0:                       000E8000-000E8FFF (928kB-932kB) UC
    MTRR 8 Range 1:                       000E9000-000E9FFF (932kB-936kB) UC
    MTRR 8 Range 2:                       000EA000-000EAFFF (936kB-940kB) UC
    MTRR 8 Range 3:                       000EB000-000EBFFF (940kB-944kB) UC
    MTRR 8 Range 4:                       000EC000-000ECFFF (944kB-948kB) UC
    MTRR 8 Range 5:                       000ED000-000EDFFF (948kB-952kB) UC
    MTRR 8 Range 6:                       000EE000-000EEFFF (952kB-956kB) UC
    MTRR 8 Range 7:                       000EF000-000EFFFF (956kB-960kB) UC
    MTRR 9 Range 0:                       000F0000-000F0FFF (960kB-964kB) UC
    MTRR 9 Range 1:                       000F1000-000F1FFF (964kB-968kB) UC
    MTRR 9 Range 2:                       000F2000-000F2FFF (968kB-972kB) UC
    MTRR 9 Range 3:                       000F3000-000F3FFF (972kB-976kB) UC
    MTRR 9 Range 4:                       000F4000-000F4FFF (976kB-980kB) UC
    MTRR 9 Range 5:                       000F5000-000F5FFF (980kB-984kB) UC
    MTRR 9 Range 6:                       000F6000-000F6FFF (984kB-988kB) UC
    MTRR 9 Range 7:                       000F7000-000F7FFF (988kB-992kB) UC
    MTRR 10 Range 0:                      000F8000-000F8FFF (992kB-996kB) UC
    MTRR 10 Range 1:                      000F9000-000F9FFF (996kB-1000kB) UC
    MTRR 10 Range 2:                      000FA000-000FAFFF (1000kB-1004kB) UC
    MTRR 10 Range 3:                      000FB000-000FBFFF (1004kB-1008kB) UC
    MTRR 10 Range 4:                      000FC000-000FCFFF (1008kB-1012kB) UC
    MTRR 10 Range 5:                      000FD000-000FDFFF (1012kB-1016kB) UC
    MTRR 10 Range 6:                      000FE000-000FEFFF (1016kB-1020kB) UC
    MTRR 10 Range 7:                      000FF000-000FFFFF (1020kB-1024kB) UC
 
  < PAT Settings >
    PAT 0:                                WB
    PAT 1:                                WC
    PAT 2:                                UC-
    PAT 3:                                UC
    PAT 4:                                WB
    PAT 5:                                WC
    PAT 6:                                UC-
    PAT 7:                                UC
 
  < Performance Tips >
    Tip T210:                             Mainboard supports faster CPUs, so the CPU can be  
                                          upgraded when needed.
    Notice N224:                          SMBIOS/DMI information may be inaccurate.
    Tip T2:                               For more information about tips, press F1 and scroll  
                                          to the Tips section.
 
<<< Windows Memory Information >>>
--------------------------------------------------
----------------------------------------------
 
  < System Memory Summary >
    Total System Memory:                  2718MB
    Free System Memory:                   2268MB, 83%
    Total Physical Memory:                1024MB
    Free Physical Memory:                 751MB, 73%
    Maximum Page File:                    1694MB
    Current Page File:                    671MB
    Free Page File:                       1517MB, 90%
    Page File:                            C:\pagefile.sys 768 1536
    36-bit Page Size Extension:           No
    Max. System Pages:                    503808
 
  < Extended Memory Information >
    True Allocated Memory Load:           52%
 
--------------------------------------------------
----------------------------------------------
*****  End of Report  *****


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1204218
martin-vig​nerte
Posté le 20-02-2002 à 14:17:26  profilanswer
 

Arf :ouch:  
J'ai encore besoin d'une ch'tite info. Nan j'déconne  :D  
 
Euh ben, j'ai bien vu ton bus à 133 et moi ca m'avait réglé mon prob. Désolé, je peux rien faire de + :(

n°1204250
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 14:22:37  profilanswer
 

merci quand meme martin :)


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
n°1204287
martin-vig​nerte
Posté le 20-02-2002 à 14:26:44  profilanswer
 

De rien  ;)  
Si t'avais un tuyau sur le topic où personne veut me répondre :cry:  :cry:  
Ca serait sympa  :)  
http://forum.hardware.fr/forum2.ph [...] ic=&trash=
Ah attends, je kroi qu'on m'aide !! :bounce:

n°1204340
lorenzoo
www.3d-station.com
Posté le 20-02-2002 à 14:36:07  profilanswer
 

bein a priori, kelkun t'as donne une reponse, aussi non, je ne vois pas du tout :(


---------------
www.3d-station.com Site communautaire et de ressources 3D.Interview d'artistes, Tutorials, free plugins, review, galerie 3d, concours, chat, forum, news...Welcome! Mon site perso: http://lorenzoo.3d-station.com
mood
Publicité
Posté le   profilanswer
 

 Page :   1  2
Page Précédente

Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Hardware

  mon xp1.8 m'enmerde :(((((

 

Sujets relatifs
Plus de sujets relatifs à : mon xp1.8 m'enmerde :(((((


Copyright © 1997-2025 Groupe LDLC (Signaler un contenu illicite / Données personnelles)