oui c'est dans le manuel mais voici une review qui en parle :
The VID1-4 header allows hard setting of the CPU core voltage from 1.675 to 1.85V with two voltage outputs, depending on which CPU type is used. In order to really burn up the CPU, though, it is necessary to move the Voltage Regulator Output Limit jumper to the Unlimited position. In addition, the A7V333 features an undocumented Overvoltage jumper. The same jumper on the P4B266 opens up additional Vre settings in the soft BIOS, in the A7V333, moving the Overvoltage jumper simply increases the Vre by 0.3V, that is, if the Voltage Regulator Output Limit is set to "unlimited". Consequently, if the Vre is set to 1.75, the real Vre as shown by the Hardware Monitor is 2.05V. Better be careful with this one.
http://www.lostcircuits.com/mother [...] 33/5.shtml
Sur un forum j'ai vu un gars à 2,18v avec cette carte.
En fait le manuel explique comment activer le voltage illimité. Mais pas la position des jumpers pour obtenir les différents voltages au-delà de 1,85v.
Ca doit pouvoir se trouver.
vraiment cette CM rox. Le seul reproche que je lui fait c'est que j'aurais aimé avoir un multiplicateur cpu/ram à 4/6 ou 4/7 en plus du 4/5.
[jfdsdjhfuetppo]--Message édité par c_planet le 30-05-2002 à 20:18:02--[/jfdsdjhfuetppo]